Common mistake, it’s the model before the E30, an E21, and I agree 😍❤️, LOL. It drives beautifully!
@ericrollins4607 Жыл бұрын
Tony, if you forget to pump up air spring before putting on the lowers, what will happen besides it making it harder to put the bottom nut back on? Will it cause any negative air chamber issues?
@TonyHob Жыл бұрын
As far as I know it should not cause any problems
@markpurugganan4743 жыл бұрын
Hi nice video. Can i use 5wt rockshox oil in the damper side? Its the only one available here in our place.
@TonyHob3 жыл бұрын
I can’t say officially but in my opinion it should work fine
@markpurugganan4743 жыл бұрын
@@TonyHob thanks. please continue making videos like this.
@djmystery72354 жыл бұрын
How hard is it to get the seals in if you just use a socket?
@TonyHob4 жыл бұрын
You risk damaging the seal, I also read that the new seals are very difficult to insert without the tool. I did the socket with my Suntour and it worked. Not sure if I would try it with the Fox.
@djmystery72354 жыл бұрын
Tony's Hobbies I saw someone use a ranch dressing lid as a driver 😂 if the walls are too thick on the socket can’t I just remove the spring on the seal and re-install it?
@TonyHob4 жыл бұрын
That’s what I did with the Suntour. It did work without damage but I used the tool with the Fox (the Suntour is a 32mm)
@djmystery72354 жыл бұрын
Tony's Hobbies I’ll tell you how it goes. The seals should be here in 5-6 days
@tomghoreyeb95472 жыл бұрын
@@TonyHob You don't need the fox tool. There's a lot of 34mm fork tools. I paid $9 for mine.
@torynhuntley29284 жыл бұрын
Is this a 34 rhythm?
@TonyHob4 жыл бұрын
This is the Float. The procedure is similar for the Rhythm. Check the oil volume chart to make sure you use the right oil. www.ridefox.com/fox17/help.php?m=bike&id=884