Fox Body Mustang 🐎 - Contour Electric Fan Install - ProM Problems - LMR instructions might be wrong.

Parts used in this build:
Waterproof connector: amzn.to/3w9iUKA
Butt Connectors: amzn.to/3PoQfIs
Crimp Tool: amzn.to/3T4OW3Z
Conduit: amzn.to/3QzGZCE
and amzn.to/3STvYO6
Wire: amzn.to/3Cf6HIs
Contour Fan: lmr.com/item/L...
CONTOUR FAN BRACKET KIT: lmr.com/item/L...

[@bobfisher9452]

Nice job troubleshooting! I’m still running the stock fan. But I only have a built 306 making a little over 300 HP lol.. Still fun cars to play with. Went to a car show couple days ago w the wife. Had a blast doing burnouts and power slides all the fun stuff! Just not the same in the newer stuff. I also have a 2016 GT-350 that’s fun to drive handles great, but I can’t burn rubber like I do w/the 🦊 ! Thanks for the content 👍

[@Bobby4v]

You cannot beat the price and efficiency of those contour fans! I have them on my 93 notch with a dart 363, which is 100% a street car, and the car never gets hot. Great video

[@tmack4703]

Great suggestion at the end. Thanks for sharing your experience.

[@ThisOldFarmShop]

Thank you for watching!

[@angry408w7]

i replaced the fuse with a breaker and use the pro m blue to individual relays for each fan. also running contour fans.

[@funkystangs2843]

Love my contour fans. They work great. I used a dual 70 amp relay from Leash Electronics. They make awesome products. Got my fans from eBay, $80🤣 great crimp Pro M🤣 nice video. I HAD a video on them🤣🤣

[@ThisOldFarmShop]

Sucks you lost all your old videos! I was just going back and watching them when your old channel disappeared!!!

[@funkystangs2843]

@@ThisOldFarmShop I have 90% of them. I have rereleased a few, and will continue. It’s just finding them and putting new branding. And let’s face it, I sucked when first started, and kinda still do🤣, but they are in need of an edit

[@ThisOldFarmShop]

LOL, I went back and watched some of my first videos. No wonder they didn't get many views 🤣. I suck only slightly less now 🤣🤣. It's still fun making the videos though. I don't have any friends locally with a Fox Body, so it's fun to interact with like minded folks. 👍

[@ferdinandcuevas8457]

Are the wires too the original 30amp fuse of sufficient Gauge to be able to handle the 50amp Thermo circuit breaker . Good content , like any modification You need to work around obstacles and make it work for Your situation also alternator upgrade is highly recommended for any 🦊 with additional electrical loads . Best Wishes 🇺🇸🇵🇷🦊👍

[@ThisOldFarmShop]

According to the Pro-m efi manual, original wire is good to 70 amps. Not sure why they didn't include a larger fuse... I put the 1995 mustang 130 amp alternator in years ago. The fans have been working great! 👍 No more overheating! Thanks for watching! 😎

[@93notch44]

Good catch. I can't even get my ecu to talk to my computer. Insight just says offline

[@ThisOldFarmShop]

Man, that sux. What do you think the problem might be?

[@christopherwright7541]

Nice install. I'm curious...At 9:45, what's the matte black tape you used and how did you connect the wiring harness to the bottom of fan shroud to hold it in place? I'm looking to go with this fan and larger radiator in my 67.

[@ThisOldFarmShop]

Thanks for watching! I used this kit from lmr. Wire harness tape and clips. lmr.com/item/LRS-TA31-K/Wiring-Harness-Retainer-Clip-Kit-Cloth-Wiring-Tape

[@christopherwright7541]

@@ThisOldFarmShop excellent! Thanks for the quick response.

[@baldemarguerra1483]

My fans turn off once my car starts getting hot

[@ThisOldFarmShop]

That's not good! What are you using for a fan controller?

[@sz2950]

I know year old video, but at least you had your Pro M order filled. I feel they lie to customers, look like a terrible company to do business with. I know. I regret doing business with them. They have lousy customer service & are sitting on $4200. Of my dollars. I have nothing but a little lip service from them. Good luck with your parts, lve lost all respect for them. I’ve also heard Chris the former owner was a real ass to deal with

[@ThisOldFarmShop]

Oh man! Sorry to hear about your troubles! I didn't know that someone else owns the company now. I really hope they straighten out because there are a lot of people who may need service in the future. And it really is an awesome product. And yes, he could be abrasive at times especially with someone like me who didn't know much of anything at first... Best of luck! Please keep us updated on the progress of your order!!!!

[@sav22rem22]

This is worrying to hear. I just put my Pro M system on layaway and am a little nervous to finish it now after reading this. I didn’t know Chris Richard’s wasn’t still over the EFI system

[@rattletrapfox1001]

this is every mod I've ever done on the car. It never goes smooth.... what a an asshole car

[@ThisOldFarmShop]

Sometimes I just give up for a few weeks, but I guess I'm a gluten for punishment 😅

[@bobbywalter5320]

😄