427W Fox Body Build Overview - Rundown of Setup & Startup Pt. 2

[@williamperry2516]

Just found the channel and love it. I’ve been watching all day getting ideas for my Fox build.

[@SavageProductionsCars]

Thanks! If you want some help on build combos and want to order some parts from us, we can help you achieve your goals. Our contact info is in the description.

[@jp360ford2]

I’ll never forget the time I let my roommate borrow my ‘92 Foxbody. It was during Sunday services and he needed to run home to his house. He had his own car he just really liked my Foxbody. He was gone for a while then came back and came to where I was sitting during services and whispered, “hOW dO YoU GEt THe kEY oUT?”. 😂😂😂 I told him there’s a button under the steering column.

[@SavageProductionsCars]

Only fox body people will remember lol

[@Q_VIEW]

Motor looks amazing

[@SavageProductionsCars]

Thank you!

[@rdy2run332]

Very clean engine bay...good work guys

[@SavageProductionsCars]

Thank you!

[@think1stproductions]

Awesome. Look forward to the new videos

[@nathantuck2257]

Sweet Fox! New subscriber and looking forward to more.

[@HenauderTitzauf]

HEY, YEP IM YELLING, CAUSE I FOUND A CAR THAT HASNT GOT A FRIGGIN LS IN ITS ENGINE BAY!!!!!!!! I like it so dad gum good, I’m going to give a high five and SUBSCRIBE! Yea, Blue Oval!!!!

[@SavageProductionsCars]

We like keeping the manufacturer's engine in the manufacturer's car around here 👍

[@2camsam]

love the stock radio.

[@mmjnice97]

Boy that license plate looks sooooo familiar Lol😉

[@erikturner5073]

Nice car! Hope you reinforced those torque boxes. With all that power along with those drag radials, those boxes will need them!

[@SavageProductionsCars]

That was one of the first things we did. We also did frame connectors before it left.

[@DJDIGITAL1983]

I need a list of all these parts lol, I just bought a 91 fox.

[@daviddixon3567]

I'm so glad I have 4 foxbodys an a 2020 coyote an DONT EVER plan on selling are ls1 swapping them.

[@salvinni3434]

That cluster lens still drives me nuts, even in video format. 8:22 Got the new lens sitting here. Fyi, those interior cleaners that make everything shine and look nice destroy lenses. Seen it get on there and wiped instantly but damage was done.

[@SavageProductionsCars]

My car had the same issue. I ended up just getting a replacement.

[@corymcghee9107]

I need a upper lower intake like that

[@hausmanaaronw]

That's a 351w block stroked to a 427? What accessory brackets are you running?

[@SavageProductionsCars]

It's a Ford Performance 427, so it's however they build it.

[@hausmanaaronw]

@SavageProductionsCars ya I Googled it. It's a 351w stroked to a 427. How well did the factory brackets mount up? The 351 block is a 9.5 deck and the 5.0 is an 8.2. Everyone tells me the brackets don't enterchange. I going thru the same thing right now and trying to get all my ducks in a row before I start. I wanting to procharge mine.

[@SavageProductionsCars]

@@hausmanaaronw it's been a while, but I think we used a 351w swap k-member. This was part 2 of the build series, so you might want to watch part 1 as well. It might answer some questions you have.

[@SavageProductionsCars]

@hausmanaaronw kzbin.info/www/bejne/rYO1gYiXn6t3rcksi=Emwd63-nnTn-LT61 I believe there's other videos on the car from earlier if you wanted to look.

[@hausmanaaronw]

@SavageProductionsCars ya I've watched them all. Very nice job. Just nothing about the factory 5.0 accessory brackets. Like the A/C, PS and alt.

[@audiophilefool]

The IAC valve has to be removed in order to change the oil?

[@mustangjoe2066]

Which hand held tuner he was using ?

[@MrStangdawg]

Trying to understand how the fuel lines are connected. Why does no dead head provide a better setup for a supercharger?

[@SavageProductionsCars]

There's one line that flows continuous fuel through both rails all while being pressurized. On a sudden hit like with a supercharger or on nitrous, there's less possibility of a lean spike on a setup like this, compared to a system which deadheads. Think about a capped off regulated pipe with 8 valves in it. If valve #1 opens, then another valve opens before the system can be regulated, the flow rate out of the second valve would be slightly lower initially. Now in a system where the whole pipe is regulated from both ends, and there's constant flow, there's less chance of that initial dip in flow rate.

[@treycone1363]

I love pushrodd sbf combo old school

[@SavageProductionsCars]

We do too!

[@5ohJ]

What state is your shop in. I’m in Ca and would love to do a similar set up on my 93 cobra. Love the channel

[@SavageProductionsCars]

We're located in Kentucky. We can get you hooked up with the parts, though!

[@TheRdub82]

You're dad is very good, thats how a Foxbody should be. What cam is in it?

[@SavageProductionsCars]

Whatever cam came in the crate engine, I'm not quite sure

[@SavageProductionsCars]

And thanks! He does very good work.

[@Jamie-ww3yz]

I've seen that car on the lift for a while now I'm glad to see it on the ground 👊

[@SavageProductionsCars]

@@Jamie-ww3yz Same here!

[@eadracing]

What’s the exhaust setup?

[@juanf4739]

You need a bigger shop

[@SavageProductionsCars]

You're not wrong lol

[@Demboyzrunnin1991]

Did you use a 302 driveshaft or a 351 driveshaft

[@SavageProductionsCars]

They use the same driveshaft

[@jesusm7754]

😂

[@XxDARKxKN1TExX]

Whats the displacement on this motor?

[@SavageProductionsCars]

427 Cubic Inch Windsor (427W)

[@bigboy9350]

What size rear tire are y’all running ?

[@SavageProductionsCars]

Watch part 1 of these two videos, we say the exact tire size and wheel offset!

[@jimbourne1238]

Love this stuff!! But please dont say things 'idle up', if you dont have a laptop connected to the ECM, YOU cannot idle it up. You have yourself a continuous throttle input car, it will not hold its own on an idle, slow speed stuff. Also that power steering pump is done, you ever have it whine under load, you have air, and the pump is damaged.

[@chadbrewer6882]

That’s not true. You can adjust the idle screw on the throttle body on the fox mustangs. Or did you mean something else?

[@think1stproductions]

What size camshaft is in it and compression etc

[@SavageProductionsCars]

It's the full Boss long block directly from Ford Performance, so whatever came in it.

[@think1stproductions]

@@SavageProductionsCars I'm praying my 427w I'm building will soak up some of the camshaft. I think I went to big 😂 oh well it is what it is 😂. I went 248/256.640/.640/HR113. It should soak up some of it. I didn't want to go any bigger but still do over 600 rwhp on motor on pump gas etc

[@SavageProductionsCars]

@@think1stproductions it depends on the rest of your setup. If you wanted to tell me your intake, target RPM, and target compression, I can tell dad and ask what he thinks. Or you can give the shop a call or send us a message on Facebook and ask him yourself.

[@think1stproductions]

@@SavageProductionsCars I'm thinking of going with the TEA TFS 240cc hi ports and a set of Stainless works headers with compression around 11.2:1. With a tko600 pro shifted with a RXT McLeod clutch

[@SavageProductionsCars]

@@think1stproductions if you haven't purchased the parts yet and want to support us, we can get almost any parts you need and sell it to you at or below retail price. And you can discuss everything with us to ensure we can build you the right combo if you're still up in the air on some things. We're a dealer for a lot of different brands as well, and if they have any dealer specials going on, we can pass those onto you.

[@droppedf100]

I am subscribed show me the f100 lol

[@SavageProductionsCars]

Soon!

[@eugenechurch6135]

That thing is raggedy

[@SavageProductionsCars]

I do not believe that word means what you think it means...this is one of the cleanest foxes we've worked on.

[@eugenechurch6135]

@@SavageProductionsCars that wavy Cervantes hppd that your a dealer with and it's whisling noise bro sounds sad

[@SavageProductionsCars]

@@eugenechurch6135 First of all, that's my personal hood that came on my car when I bought it, and it's not a Cervinis. Second of all, the throttle body can easily be replaced.

[@juanf4739]

All machimoto crap what happened to all the products we made here in the USA