FOX DHX 2 2016-2020 Service || Full Rebuild ||

FOX DHX 2 2016-2020 Service || Full Rebuild || #ridefoxbike #bikemaintenance #nasabiketech
New for 2016
Maintenance Info:
Service Interval Full Service 125 Hours
398-00-418 Tooling: 2016 Float X2, Bullet Tool
803-00-805 Kit: Shaft Clamps, Shocks, CTD 9mm, 3/8in, 1/2in, 5/8in
803-00-463 Kit: Fill Machine Adapter, 04-07 Epic IV, DHX Air, RC2_RC4 Shocks, Hand bleed optional
803-00-566 Kit: Bike IFP Depth Setting Tool Set
803-00-950 Seal Kit: DHX2 Damper Rebuild
Oil Info:
025-02-003 Oil: AM, FOX Suspension Fluid [32 oz.], 10 WT Red
IFP Info:
IFP Pressure 150 psi
Shock Size IFP Heights (All measurements +/- .050in)
7.875 x 2.250 1.243in/ 31.57mm
8.500 x 2.500 1.293in/ 32.84mm
8.750 x 2.750 1.343in/ 34.11mm
9.500 x 3.000 1.393in/ 35.38mm
10.500 x 3.500 1.443in/ 36.65mm
New for 2018:
New DHX2 Shaft Seal Reduces friction
New Eyelet Assy's for MY18 Increases IFP flow
New 5wt Oil 5wt. oil now used for MY18 DHX2
New inner body and piston Smaller diameter inner body and piston
New 2-Pos Lever and Valve Seat Kit available listed below. Backwards compatible for MY16-MY17.
Continuing Technologies:
2016-2017 DHX2 Continued Support
Maintenance Info:
Service Interval Full Service 125 Hours
398-00-418 Tooling: 2016 Float X2, Bullet Tool
803-00-805 Kit: Shaft Clamps, Shocks, CTD 9mm, 3/8in, 1/2in, 5/8in
803-00-463 Kit: Fill Machine Adapter, 04-07 Epic IV, DHX Air, RC2_RC4 Shocks,
Hand bleed Optional
803-00-566 Kit: Bike IFP Depth Setting Tool Set
803-00-950 Seal Kit: DHX2 Damper Rebuild
398-00-662 Service torque tool for X2 two position lever
Oil Information:
Damper 025-06-006 Oil: Suspension Fluid [250 ml. ] R3, 5WT, ISO 15
025-06-007 Oil: Suspension Fluid [1.00 Quart] R3, 5WT, ISO 15
IFP Information (All Sizes/Travels):
IFP Pressure 125 psi
IFP Height +/- 0.020in 1.343in
Source :
www.ridefox.com/fox17/help.ph...
www.ridefox.com/fox17/help.ph...
Music : Credited to Tokyo music walker
Way Home by Tokyo Music Walker / user-356546060
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Music promoted by Audio Library : audiolibrary.com.co/tokyo-music-walker/way-home
Free Download / Stream: • Way Home - Tokyo Music...
How to service Fox DHX 2
How to service fox dhx
How to service fox suspension
How to service fox float
how to service suspension
DHX2
DHX SHOCKS
HOW TO DO
125 Hours fox suspension service
Fox DHX full rebuild
fox dhx2 factory
fox dhx2 coil

[@massimobianchi4262]

Massimo from Italy . Thank you for publishing this very precise and professional tutorial! 👍👍👍

[@nasa-biketech]

Welcome to Nasa-biketech 🙌 You are welcome 🤗 and thanks for your valuable comments.

[@leonfreitas7294]

Thank you so much for this nice Video probably the best out there 🙂

[@nasa-biketech]

Thankyou for your valuable feedbacks and support ❤️🙏

[@rg8707]

Great video! Thanks , have one to rebuild now. Need to take apart the adjusters any advice? Looking forward to other forks and shocks videos

[@nasa-biketech]

Thanks, will make adjuster video for you for sure, Also for fork and shocks, keep in touch. Cheers

[@kurtisgassewitz4291]

Yoooo, this is awesome. Is there any chance you could make a tutorial for the Marzocchi Bomber CR?? I've looked everywhere and can't find a nice clean tutorial.

[@nasa-biketech]

Thanks 😊 kzbin.infocI75S-dqFHo?feature=share Check above video if that can help out you... And very sure I will make a full detailing video for you, but it will take time as when I get any bomber for service at that time I can only do. Keep in touch 😊

[@MTMXBL]

also, on the fox website, there's a complete step by step guide with pictures. (2011-2020 VAN P-S Rebuild). The VAN R / RC is identical to the Bomber CR.

[@MTMXBL]

great rebuild, but did that method of bleeding remove all the air? typically i see people using a syringe at the bleed port, cycling the shock, opening and closing adjusters to remove every last bubble of air.

[@nasa-biketech]

Hi, this is the like original bleed prosess from fox too, and I think push the bleed syringe by pressing your thumb with gloves not will easy to remove air from system. Thanks for connecting us ☺️

[@antonywilliams5703]

Thanks for posting this. The bearing assembly (part number 812-06-086) on my shock has a different internal seal to the one you're working on, it's a single low friction seal, unlike the o ring and split washer on yours. Do you know if they're interchangeable (both in the service kit) and if one is better than the other? For anyone like me who doesn't have the bullet tool and is too tight to buy one, I successfully made one out of an old ballpoint pen. 😁

[@nasa-biketech]

Hi, I think you need a correct seal kit for your shocks , check your shocks model year and get accordingly seals kit, Making a bullet tool through ball pen cover, Nice idea 💡

[@TheBarrettrussell]

i too am confused. in the same boat as you. Buddy from Butter suspensions says the hard oring and split ring is for the float x2 air shock, which doesn't make sense to me. and the service manual on fox has a picture of the harder o-ring being installed

[@antonywilliams5703]

@@TheBarrettrussell I spoke to another suspension guy who also wasn't sure. He suggested I try the split washer and o ring as it would cause less friction and it wouldn't hurt to try it.

[@bunseN13372303]

Why do I have a completely different seal on the U-cup body?

[@nasa-biketech]

Can you share seal kit number, that might be for 2020+ service kit

[@Ryice]

I rebuilt the suspension and it works perfectly only problem is that it's leaking through the seals on the bearing assembly where the shaft is what could cause this problem?

[@nasa-biketech]

Have you replace oil seals ?

[@Ryice]

@@nasa-biketech yes I have rebuilt a few times to make sure it was right any other ideas tysm for you help I appreciate it!

[@nasa-biketech]

@@Ryice oil leakage cause only if the seals are damaged.

[@Ryice]

Will the Fox Shox Suspension Bath Oil, R3 5wt 025-06-007 work fine in the shock or will i need fox 10wt red. Are there any alternatives as well?

[@nasa-biketech]

Hi Please use same as recommended oil in the shocks and fork to avoid damaged oil seals.

[@Ryice]

@@nasa-biketech I thought they had discontinued fox 10wt red or am I wrong. I saw in the manual I am able to use fox 4wt or should I use another alternative? Thanks for your help

[@crashtestdummie67]

My 2019 dhx2 does not have working rebound and compression adjustment. What could be the problem?

[@nasa-biketech]

Hi That need I think rebuild and make sure the reservoir has a pressure as recommended

[@crashtestdummie67]

@@nasa-biketech thank you for your answer! I sold the junk...

[@wawanjrjr198]

i see in the video the shaft is scratched, is it not leaking?

[@nasa-biketech]

We have repaired that with coating of Araldite adhesive, and that's working fine.

[@Ryice]

My shock doesn’t rebound without coil is that a problem?

[@nasa-biketech]

Yes, Rebound function can work without coil Have you service your shocks recently? If yes than I think shocks need bleed again.

[@Ryice]

@@nasa-biketech it wasn’t my air pressure could there be another reason it won’t rebound at this point I pretty much have to rebuild it right?

[@johnbravo7542]

That Shock shaft is ruined and will always leak

[@nasa-biketech]

We have repaired that shaft using araldite adhesive.. you can also try . And shocks is still working fine till tha date.

[@mikko3199]

@@nasa-biketech Where is the oil coming from at 18:55 when you pressurize the IFP?

[@nasa-biketech]

@@mikko3199 Oil coming from bleed screw hole