Fox Mustang Brake Upgrade Install

Baer Fox Body Ford Mustang brake upgrade on a Saleen Mustang! Want to upgrade your foxbody Mustang's brakes but keep your classic four-lug wheels? Baer Brakes has you covered! No need to do a five lug swap and install five lug wheels! We install Baer's SS4+ 11" front and 12" rear disc brake upgrade on a 1986 Saleen Mustang. Best of all, it keeps the parking brake! How to install brakes on a Mustang, step-by-step.

[@yoganlates7775]

Great videos as always. Keep it up.

[@DAllman1]

Great channel brother

[@SouthOmahaSpeed]

Very nice !!!! May need to update the GLX

[@24theMoney]

Not sure I would trust modified spindles with welded on tabs. Is this kit DOT legal for street use, or offroad use only?

[@Mustang-Geek]

Not sure. I haven't had any issues. The kit works GREAT.

[@musclecargarage8882]

For the price of this kit u might as well do a 5 lug swap with the cobra brakes or with the brembo brakes off a Cadillac

[@Mustang-Geek]

1) We *wanted* to keep this Saleen's original four-lug wheels, 2) Buying new wheels, tires, and five-lug axles also adds cost.

[@musclecargarage8882]

@@Mustang-Geek Since its a Saleen i understand. My 5 lug swap cost about 1800 with new rims and tires. Ebay has some good deals out

[@chinchen5979]

why not weld the little bracket on while the bearings and seals are out.....so much cleaner for a system that cost 3200.00 +

[@Mustang-Geek]

Bolt on is reversible. Clamp is hidden anyway.

[@unbound_classic]

@@Mustang-Geek I can understand that as it's a Saleen. If it was a standard model though I wouldn't hesitate to weld it on.

[@NeverEnoughPyro40]

I saw the nicks on the rear axles but that is extremely common on older vehicles, Why replace the axles? Did you not know that they make a repair kit that offsets where the bearings ride on the axle? It is not some cheap Chinese made kit sold on Amazon, Most bearing manufacturers offer them including Timken which is the best, I have been using them for over 30 years!

[@Mustang-Geek]

The nicks are where bits of the bearing surface on the axles had fatigued and broke away. Not good. I'm not a fan of "axle saver" bearings. If we're pulling the axles to replace the bearings, just replace the axles.

[@oscarvillarreal8951]

Is this kit lighter than stock?

[@Mustang-Geek]

Good question. The front setup is because of the aluminum caliper and aluminum hat. The rear, definitely not! The rear rotor is beefy and all iron.

[@Matt211881]

Who sells this kit

[@Mustang-Geek]

baer.com/1979-1986-Ford-Mustang-Brakes/