Slick idea putting the springs in jacking up one side and lower the other. I’ll keep that in the old book of tricks. You son is very polite to says a lot about your parenting good job sir. Me and my 2 sons(9 years old) are going to pull and reseal the 5.0 next week in my car . Gets the kids using their hands and brain 😊
@HOUSEOFDULA5 жыл бұрын
Awesome man! Much thanks. I just share down to my kids what I was taught. My son is a thinker for sure...just need him to want to be more hands on with the cars. I think he'll get there when he gets a little older.
@PVOSQUAD3655 жыл бұрын
You’re the reason why I bought my 86 t top and I am so thankful for you and your channel. Thank you and keep up the great work.
@HOUSEOFDULA5 жыл бұрын
Hey if I can influence others to spend money along with me I will! Welcome to the new Fox addiction! Appreciate the comment man.
@4eyefoxbodyfanclub6255 жыл бұрын
Kick ass control arms, cant wait to see how they perform.
@anibalcruz83555 жыл бұрын
When I put my control arms in, and they where just lust the regulars, just like the ones you originally had. They where a pain. But you know I found a little truck. If you jack up on the right side p side of the axle they magically go right in. No joke, jacking up on the passenger side for both the right and left side control arms gets it done. You ain't kidding, that suspension work always leaves me racked. Even when I was younger. Lol the impacts help, before I used to just wrench it lol. Young Ladd. Another good job, well done.
@HOUSEOFDULA5 жыл бұрын
Why thank you sir! That is key...knowing to rock the axle one side to another, or like you said jack one side up helps the angles.
@chadj83495 жыл бұрын
Team Z FTW! I have the anti roll bar to keep from lifting the left front from torque on launch. To drive on the street I just unhook 1 link. You’ll feel like it’s a new car with this kit it works great 👍
@HOUSEOFDULA5 жыл бұрын
Sweet! Glad to hear this
@07bluelbz5 жыл бұрын
Awesome vid Mike. I suggested the Street Beast arms to you in an older vid and I'm glad to see you settled on those. I will be putting them on my car as well.
@HOUSEOFDULA5 жыл бұрын
Sweet! Yeah you did. A lot of folks suggested MM, panhard bar, etc. lots of good options, but this setup looks pretty slick.
@mikegay85115 жыл бұрын
Great video and good job on the kit. Something to look into for my project next year. I need a shopping list of stuff. It is great to see you and your son. Keep up the good work.
@HOUSEOFDULA5 жыл бұрын
Thank you sir!
@wastedwagesmercuryman60185 жыл бұрын
Beautiful setup, but ass backwards with the install. Curious to see how the uppers go in! Love the channel man, good to see someone learning as they go. Very inspiring!
@HOUSEOFDULA5 жыл бұрын
Appreciate it man. MOst is a learning process, sharing my experiences with others...Ive replaced, removed and installed rear-ends in foxes before. Once other time on this car and never had an issue putting it in lowers first. This was the first time It dawned on me that "maybe" doing the uppers first would be easier.
@DetroitStickUp5 жыл бұрын
Good work on the stang as usual. Connor's front teeth missing are fun times. My kids would say they ate a knuckle sandwich for lunch, Hahah. So Cute at that age.
@HOUSEOFDULA5 жыл бұрын
Thank you sir always! Pretty damn cute, I agree...I biased because hes my kiddo, but I do love the age hes at.
@JamesThompson-rg5np5 жыл бұрын
Nice to see back to back vids Mike! Missed ya at TMI. Car is looking epic. UNO!
@HOUSEOFDULA5 жыл бұрын
Yeah! How was it this year? Weather was nice. My car was down of course, hoped to have it by then, but just didnt work out.
@JamesThompson-rg5np5 жыл бұрын
@@HOUSEOFDULA Pretty good, worth the drive. Was hoping to see more foxes from NTFB's but was good.
@HOUSEOFDULA5 жыл бұрын
Man a lot of folks boycotted it from last year...It is what is, I would have come if the car was ready.
@mustangmarty84914 жыл бұрын
Hey Mike, I've heard one of the best mods you could do to your car is a Pan hard bar for your rear end. I bought one and haven't installed it yet, they say it makes your car drive like it's on rails.
@cburford27305 жыл бұрын
Hell yeah team Z! They’re local to me
@haydenderr67284 жыл бұрын
So would you stay with the team z now that you've had it installed? Or would you go panhard torque arm set up?
@RPJs-Cuisine5 жыл бұрын
Once again, awesome video!!!
@HOUSEOFDULA5 жыл бұрын
Thank you sir!
@yoder49144 жыл бұрын
On the upper in pretty sure they recommend you close them up all the way and then use an angle finger to set it to -2 1/2 degrees
@mchristr2 жыл бұрын
The bushing tool from Maximum Motorsports is really necessary for removal/install on the car. It's the best $40 you'll ever spend.
@4eyefox5 жыл бұрын
Team Z all the way. Wish Dave would just give me free stuff from his company lol. They have amazing products. I plan to only use there stuff on my fox.
@HOUSEOFDULA5 жыл бұрын
Me too man! I paid full price for this and everything on this channel lol No sponsors here man, not that big yet.
@jermainewilburn74713 жыл бұрын
This is my favorite vid right ✅ 🤣 here,,much mush love 💘 ,,,oh maybe 🤣🤣🤣
@graigorygilbert6025 жыл бұрын
I hope all is well with you and your family after the tornado hit.
@HOUSEOFDULA5 жыл бұрын
Thank you for your concern! We are fine, it hit in the Dallas area, Im more south Fort Worth / Arlington area. We got heavy rain and hail last night, but luckily no damage.
@Ls3guy5 жыл бұрын
I had the same problem with my team z set up the center bolt on the uppers
@horseracing5.0595 жыл бұрын
You the man dula! love this car. You're one of the guys that made me want to make my own channel on my sn95 build. You get a chance check it out.. Rock on man thanks for your vids 🤙💪🏁🐎
@HOUSEOFDULA5 жыл бұрын
Heck yeah man. Appreciate it. Do it! More content the better.
@ilike9s5 жыл бұрын
UNO, nice install.
@HOUSEOFDULA5 жыл бұрын
UNO
@briansims43655 жыл бұрын
Way to go Mike!
@HOUSEOFDULA5 жыл бұрын
Thanks Brian, appreciate it.
@Firebird4005 жыл бұрын
Ah , I just went with the summit arms . Cars pretty much stock to . There’s no way possible that setup not going to be banging and clunking with a lot of road noise. Everyone has different levels of tolerance tho .
@HOUSEOFDULA5 жыл бұрын
This is true. Stock rubber will be the most quiet, but Im willing to be these will be pretty smooth and clunk free! You always have to give and take a little for the price for performance.
@2sheamotorsports1993 жыл бұрын
Where’d you get the MB plate from on the wall ?! Did you live there ? Just curious. Great videos !
@mikeyxii315 жыл бұрын
1st? Who cares I'm here for control arms for my rusty fox
@300whiteout95 жыл бұрын
These are sweet
@mustangx28085 жыл бұрын
What springs are those car looks great!
@HOUSEOFDULA5 жыл бұрын
SVE Lowering springs. They are made in USA. Been fine for me.
@turboman351w34 жыл бұрын
dula coil overs would change everything on your fox and make a world of diffrence.
@vincenapolitano6585 жыл бұрын
Bro wall you're talking there's music playing what is it I love it 😎
@HOUSEOFDULA5 жыл бұрын
In the garage background? or at the end when I'm talking? Which part.
@vincenapolitano6585 жыл бұрын
HOUSE OF DULA the song in the beginning
@alans89gt885 жыл бұрын
Hey biggen. Where bouts are ya located? Im in Greenville east of Dallas. Would love some input on my build.
@HOUSEOFDULA5 жыл бұрын
Hey man! I'm in south Arlington / Mansfield area.
@alans89gt885 жыл бұрын
@@HOUSEOFDULA Coolio. Well, yall might shun me. I have a '93 BMW 325is swapped with '89 5.0. B303, GT40 heads Edelbrock RPM intake and will be installing a Holley Super Sniper EFI I just got along with finishing up my On3 single kit I got from Turbokits.com. Have to do some cutting and welding on hot pipes since the Foxbody kit doesnt fit exactly with this car. Car has the C4 trans as well, 3200 stall. And 3.91 original LSD rearend.
@18-tolife205 жыл бұрын
Why does the cut side of the spring have to the back what will it mess up if it's not
@HOUSEOFDULA5 жыл бұрын
The cut on the lower end causes the spring to lean forward. Matching the acute angle of the lower control arms and upper spring pocket. It just lets the spring sit vertical. If it was 180 degrees It could bind the spring up.
@18-tolife205 жыл бұрын
@@HOUSEOFDULA ok thx
@MrDesdaman5 жыл бұрын
Do you think it would be easier to put the uppers in first? I have to do mine this weekend
@HOUSEOFDULA5 жыл бұрын
Well maybe with a lift. On the garage to get the uppers in first you need lift the axle higher up, balancing it on the jack and get your body up in the upper mounts. Might be easier, but on the floor in garage its likely safer to do the lowers each side at a time. Worked for me. Just tilt the axle to get each side in.
@MrDesdaman5 жыл бұрын
@@HOUSEOFDULA I meant into the torque boxes first. Love the build man
@HOUSEOFDULA5 жыл бұрын
@@MrDesdaman - My bad! Man It doesnt matter. Lowers we're much simpler, so yeah knock out the top to get it over with ;)
@lukefrench4643 жыл бұрын
looks exactly like bmr's control arms
@HOUSEOFDULA3 жыл бұрын
Its my understanding BRM has a "cloned" version of these.
@skilled4reel2 жыл бұрын
Am I getting a Chris fix vibe?
@HOUSEOFDULA2 жыл бұрын
Never really noticed and dont really watch a lot of his, but I'll take that as a compliment lol Hes been doin it a LONG time and at 8.5 MILLION subscribers, lets just say he's well off compared to me and doing something right
@DevinMiller-ot9gw4 ай бұрын
Size rear end 8.8?
@HOUSEOFDULA3 ай бұрын
Yessir
@adamrushka8096 Жыл бұрын
Whats the intro song ?
@Stevesbe5 жыл бұрын
Should have just got the solid kit
@HOUSEOFDULA5 жыл бұрын
Why? Just curious to hear others opinions.
@johngarrard72147 ай бұрын
I’m very very late to see your video. I have solid and will strongly advise against doing so especially if you drive on the street. With running solid my 03 Cobra is horribly noisy and it’s very easy to say one of my worst decisions I made on my car.
@robhunter24353 жыл бұрын
Is that not the reason we have kids? To hand you the tools when they are older when working on your fox body mustang!!!
@jermainewilburn1814 жыл бұрын
This my third time ,😂😂😂😂
@kb016632 жыл бұрын
Yeah that kit ain't $600 anymore, more like $900 now
@HOUSEOFDULA2 жыл бұрын
Dang, no kidding...man everything is still so crazy right now. 300 buck inflation to do lack of materials sucks.
@jermainewilburn1814 жыл бұрын
Ju Dula was up ,
@mikedambowic58625 жыл бұрын
The mony u $$ they should have in the kit ARP bolts , to bad.😕😐