PSA Micro Dagger 2K Rounds Later

[@markpilon6959]

Seem like a humble dude, and you're reviews are short, simple and to the Point And I appreciate that, not word salad. A like and sub from me brudda

[@Foxbodys4life]

Thanks, I’m not a “reviewer” by nature so most of the time I’m just winging it and trying to think about what you the viewer might be interested in. I really prefer to just shoot lol. Thanks for the watch and sub.

[@seanguns8191]

great explanation of the benefit of the comp on that light carry gun

[@MikeMcclendon1377]

Thanks for the review! I have the compact DAGGER with threaded barrel & comp and it feels great. I wanna get the micro DAGGER & your review helped.

[@DesertTactical]

So jealous. I have a Micro Dagger slide paperweight. :(

[@Foxbodys4life]

You can send me your slide and I’ll break it in for you 😂.

[@trufuel9054]

😅

[@RickyMontijo]

Looks like yours is the first real review up!

[@jeremyrencher5911]

Thank you for testing and video. I can't wait to get one

[@Foxbodys4life]

Todays drop is the black C-1. bit.ly/4abnKcU

[@1GunGurl]

Headed to the range with my micro dagger in the sniper green slide with the comp.

[@joeyphillips1181]

Im a big M&P 2.0 guy so i don't mind a hinged trigger

[@copper178]

I ordered the blk Micro Dagger C-1 2 days ago Thursday and it arrives at my ffl on Monday. That's the fastest shipping I've ever had from them on an ffl item. I've had the 43x and 48 since they 1st released in 2019, and have picked up a few more 43x's as blue labels over the last several years. Getting a Micro Dagger was just something I knew I would buy as soon as they unveiled it at Shot Show. I've had a few Micro Dagger slides since June so I've actually been waiting on the frames to release, but grabbed one of these comped slide models when they dropped at 4pm on Thursday. Frames are allegedly releasing in a few weeks per the PSA CEO, so I'm grabbing an additional frame also. When they release different color frames for the Micro Dagger, then I will be buying those as well.

[@Foxbodys4life]

Yeah Jamin has said mind December hopefully on frames. It really depends on the demand I would think. If they keep selling out in 60-90 seconds I don’t see how they can offer frames only yet lol.

[@Vanity7k]

Nice vid, left a like! Does the 407k allow for 1/3 cowitness with the irons?

[@Foxbodys4life]

Yes the slide is cut enough that any optic will cowitness.

[@jakeco438]

Subscribed. I just ordered the C-1 in black today. Couldn’t get any extra mags because they were out of stock. What holster are you using?

[@Foxbodys4life]

kzbin.info/www/bejne/fYPdlaJvdpaqpdUsi=AJ-pZn3BUT3MfOOJ Mags seem to be hit or miss everyday. Just gotta get lucky on them. That’s a video on the holster I’m using.

[@kaser92337]

I check everyday how the hell ?

[@jakeco438]

@@kaser92337 I went on their website and told it to email me when back in stock. I did that for every Micro Dagger model they have. You have to keep an eye on your email. Because they will sell out within 20 to 25 minutes. I just got lucky and saw they were in stock 2 minutes after I got the email. By the time I paid and got my confirmation. They were sold out.

[@svenno9951]

I like the idea of a comp that works but you buy the dagger micro for conceal carry and that means small for comfort. The extreme carry cut overall length from the PSA site is 6.5" and the C-1 compensator slide version overall length is 7.1". I think that's worth being aware of. I don't know if that .6" would mean uncomfortable rather than acceptable but for some it may be.

[@Foxbodys4life]

For me it feels fine. I’m used to carrying my compact dagger and the C-1 is smaller.

[@richardnorth3466]

What holster are you using? I just got a c-1, a couple people recommended Bordertown, but wasn’t sure if there was other options. I’ve heard 43x MOS options should work.

[@Foxbodys4life]

I’m running a bravo concealment G48 MOS Torsion IWB and an Versacarry compound leather/kydex OWB.

[@richardnorth3466]

Interesting, I tried my g48 holster, but it didn’t fit 😂.

[@Foxbodys4life]

@@richardnorth3466 I’ve seen some run tight on the slide channel, the c-1 seems to be a hair taller and wider.

[@jeffreynye3019]

Would you compare the size to a regular P365?

[@Foxbodys4life]

The C-1 and X-1 are equivalent to the G48 and 365 XL. The standard would be about the same size as the 365 but has a 15+1 capacity.

[@ronwinn879]

Great video! Howdy from Texas. Any idea what is taking PSA so long to get these out? I’ve subscribed to “notify when in stock”. Love the regular Dagger.

[@Foxbodys4life]

First drop was today, there will be another drop tomorrow. If you follow my channel I will post a link tomorrow directly to the one’s dropping tomorrow. Approximately 2:55 our time.

[@Foxbodys4life]

Today 2:55 central, be ready. bit.ly/3uQwrt2

[@sirmykal9764]

I subscribed to the "notify when in stock" also. PSA has never notified me. Picked up 2 frames just by luck.

[@arguy3297]

Wish theyd just pump production on the frames for awhile. Ive got a g48 mos slide for my g48 that is just begging for a MOS style frame like these are.

[@Foxbodys4life]

I saw a post that it may be another week or 2 before frames only again, I’m thinking they are waiting on another shipment to come in.

[@codycox2685]

You should get the 3d printed magwell. Has been worthwhile.

[@ArsonalTech]

I carry a Glock 45 and I was thinking of going to a 43X for weight and size reduction. Do you own any Glocks? Is the trigger pretty much identical to a factory Glock trigger?

[@Foxbodys4life]

I have a G19, personally I prefer the dagger hinge trigger. I can’t shoot the Glock of crap, I’m really thinking about swapping out the gen 3 trigger for a spare dagger assembly I have lol.

[@thearmedgardener]

Keep killin it, i tbink this is what ima go with, been looking into the 365 x macro all day, and it seem to have a huge ammount of lemons, snd after i got a lemon for mt FN reflex that they wont fix, i refuse tk get burnt again.

[@Fart2Toots]

Do you know if this would fit in a holster that was specifically for a G43x? I sold my 43x couple years ago but want to revisit this handgun but maybe give PSA a go

[@Foxbodys4life]

The standard Micro should fit any 43x holster the C-1 and C-1 would require a 48 holster.

[@karimkhan7140]

Keep up the great work, buddy.

[@Foxbodys4life]

Appreciate it, and thank for watching.

[@peterreily1490]

How’d you get your hands on them? Will is accept Glock pattern replacement triggers? They look neat. Though PSA isn’t going to be like glass where a p10C slide would be. I like the idea. I wish they’d come out with like a Sabre line with their pistols. Something quasi custom shop edition.

[@Foxbodys4life]

I got mine back in September on a limited drop, from my understanding you should be able to use g43 triggers. I don’t do trigger swaps so I’m only going off what I have seen posted online.

[@wiseonemunir6027]

Love it. I have the same one.

[@joshjenkins942]

Thank you!

[@brentondouglas3909]

Does the PSA Micro fit in the Bravo Concealment holster for the G48? That would be amazing

[@Foxbodys4life]

kzbin.info/www/bejne/fYPdlaJvdpaqpdUsi=KCgw8V9Kcr7lZFq2

[@Foxbodys4life]

The OWB bravo will require some sanding on the slide channel as the micro sled is slightly taller by a hair.

[@usawcraig1]

Sorry if it’s already been asked I skimmed through the comments and didn’t see what I was looking for. You mentioned 2k rounds and no magazine malfunctions I believe. Were there any malfunctions? If so what were they?

[@Foxbodys4life]

Your good. Yes no mag malfunctions early on I had an issue with FTEs, the first pistol was purchased by me and in a group of 5 that were sent out. I got with the engineers and they did make changes to the frame and parts. The second pistol was with the updates and the C-1 still is picky with some 115gn but zero issues on the 1000+ of 124s. Some 115 is not as hot and can cause some FTE randomly. AAC 115 has been good and Winchester as well. Herters was the main ammo that gave me problems. That has been the only malfunction either has had. Even the original one that wasn’t updated (they made slide changes when it was sent in) has been much improved with a Glock 43 oem extractor installed (which was one of the changes made, they redesigned the original to be a match to the oem Glock). I do feel that the problem of FTEs is exaggerated because of the comp, anything with a comp can cause FTEs because of ammo choice.

[@joshuakarlsen1377]

Good video however I'm very curious to know what kind of ammo it was that was giving you problems. Please let me know the brand and weight of the ammo.

[@Foxbodys4life]

Herters 115 gr. It was purchased about a year and a half ago in a bulk 500 round pack. Head stamped *USA*.

[@thomaswaibel253]

This seems pretty cool.

[@margie1982]

I wonder if the shadowsystem cr920 trigger will fit in the micro dagger. I installed the MR/DR/XR in my compact dagger and it’s the best $20 upgrade for it.

[@Foxbodys4life]

Any g43x trigger should work.

[@loganpatterson4674]

Cr920 is not an exact clone like their bigger guns are. Do your homework before you try that.

[@DavidThomas-sp2yc]

What screws are you using for the holosun? The ones from holosun or psa

[@Foxbodys4life]

The ones from PSA and I did take 2 threads off the right side.

[@johnflatt665]

Is it possible to fit the micro with comp on the compact dagger's frame for a flush fit of the frame and slide?

[@Foxbodys4life]

No. The micro is a G43x/48 clone and the dagger is a G19. The micro is much thinner.

[@nathanpatton5774]

Did you have to file down the right side screw to mount your optic?

[@Foxbodys4life]

Yes. The one provided was 1 thread too long. I took 2 off just to make sure. My cousins 48 that I zeroed for him this past week had an EPS carry and it had the same problem.

[@nathanpatton5774]

@@Foxbodys4life thanks. I just ordered the all black X1 and the black/fde C1 so excited to get them. I just recently put a 507c on my dagger compact and the screws that came with the holosun went right in without hitting but I’m going to try and check it as well.

[@jodopeg]

DOES THE MICRO-DAGGER take the same magazines as the regular Dagger...?

[@Foxbodys4life]

No it takes the micro mags/g43x/48 mags. Its a smaller platform but with the PSA mags you get the same 15+1.

[@XAngelofgunzX]

@@Foxbodys4life I'm rather new the gun community so pardon my ignorance. With 43x/48 mag compatibility, which do you recommend buying out of the two? or does it not matter?

[@Foxbodys4life]

@XAngelofgunzX it comes down to the length slide you want, the longer the barrel the more accurate you will be at distance, the smaller the barrel/slide the more concealable you can be.

[@trj112213]

Hey man, what’s the difference between the X1, C1 and Extreme Carry and which one would you suggest?

[@Foxbodys4life]

X-1 is 48 length and no comp, C-1 is 48 length but has the comp built it and a 43 length barrel and the extreme carry cut is the standard 43x size slide and barrel. It’s up to the individual on their preference, I like shooting the C-1 but don’t have any experience with the others yet.

[@glockwhore]

​@Foxbodys4life how is it cleaning that comp I bet it gets super dirty quick eh?

[@Foxbodys4life]

@glockwhore not bad, it does get dirty quickly when running rounds but it comes right off with some cleaner.

[@rb58761]

Where did you get the 3d printed stands

[@Foxbodys4life]

I make them and sell them. Tactical Leprechaun on Facebook.

[@Zalarious012]

Do you feel the comp slide has any noticeable recoil reduction?

[@Foxbodys4life]

I haven’t shot it in the short (43x) configuration yet but based off my experience with similar sized hand guns, yes the comp does make a difference.

[@broadstreetbully4989]

Do the micro dagger work, i wanted to see a shooting at the range video also.....

[@Foxbodys4life]

I have several videos (shorts) up on my channel.

[@tedisabum]

Those pistol stands are a really nice touch. :D

[@Foxbodys4life]

Thanks. My design and sell them. PSA has been a customer for them for a few years for shot show displays.

[@1pyroace1]

Looks like a Glock 1911 n I like it

[@FindersKeepers88]

Good, thx

[@John_439]

Are they actually in stock finally? They released over a year ago now and I have never seen one in stock or at any local gun store that is a distributor for psa.

[@Foxbodys4life]

Sniper green is dropping in 5 mins. bit.ly/46VMZwT

[@kaser92337]

@Foxbodys4life still waiting for it to drop

[@Foxbodys4life]

@@kaser92337 what the micro or mags? The micro have been dropped M-F since the 2nd week of December. Always at 4ish Eastern. I make post of what’s going to be available that day for my subs. The next drop won’t be until Tuesday I suspect.

[@Stormtrooper_Accuracy]

Good sir, how'd you get your hands on this? Seems they're sold out 100% of the time.

[@Foxbodys4life]

Snagged this one in September on a limited drop. They are dropping almost daily now. Next drop is in 25 minutes. bit.ly/3RgJJWX

[@NBWDOUGHBOY]

I wonder why they haven't been promoting these heavy? I honestly can't wait until these come down to the price of the compact daggers and deals. Gonna be great to get into 43x/48 platform.

[@Foxbodys4life]

The standard micro is at $339 and I think going forward the $299 standard daggers will fade with clearance stuff. I’m sure they will still have sales but as the compact is going full optic ready those are about the same price. The frames are the same $99.

[@NBWDOUGHBOY]

@@Foxbodys4life Nice. I looked on the site and I didn't see them. They must've sold out immediately. Hopefully I catch the next drop.

[@arguy3297]

They probably arent advertising them because they cant keep them in stock for more than 30 minutes every other month

[@Foxbodys4life]

@arguy3297 they are lasting about 30-60 minutes now daily.

[@NBWDOUGHBOY]

@@Foxbodys4life Yeah the mags get gone Very Quickly.

[@TacShooter]

Do the Micro magazines fit the Dagger Compact?

[@Foxbodys4life]

No. The dagger is G19 and the micro is 43x.

[@theJdominator]

How much did thr micro dagger cost ? Thanks

[@Foxbodys4life]

The MC-1 is $359 the standard is $339.

[@settleschris1965]

Any issues with 115 GR?

[@Foxbodys4life]

Some 115 has given me problems but not on a consistent basis. 124 has been problems free.

[@shugaray8927]

How do you know which micro and what time they drop?

[@Foxbodys4life]

I see the post on social media and spread the word.

[@chrisrayburn]

I got the dagger g19 clone with suppressor sights and I'm going to change front sight bcuz they shoot low. Feels great. But always have to fix sights on glock and/ or glock clones they're good but I feel like the sw mp is better bcuz of sights r good out of box from my experience

[@Foxbodys4life]

The micros come with low profile sights similar to the non optic daggers did. They still co witness fine through the 407k. I’m not sure why they went to tall sights only on the daggers.

[@PG.Hellraiserr]

My guy picked up every shell

[@Foxbodys4life]

Yep that’s what your kids are good for 😂.

[@DadHominem]

Great info! Have you tried the comp slide on the PSA Dagger compact frame? I'm thinking of getting the compact frame, and adding the Micro C-1 slide. Thanks!

[@Foxbodys4life]

The MC-1 and micro slides are not compatible with the compact dagger. The dagger is a G19 and the micro is a 43x/48.

[@brandonbennett7337]

What’s the ammo you was having issues with?

[@Foxbodys4life]

Herters 115 gr. Head stamp *USA*.

[@Andrew-on5do]

Bro, you look like my friend Nathan. I already like you.

[@Foxbodys4life]

😂

[@bishop2355]

Thanks for the video, hope this comment helps!

[@Foxbodys4life]

Every little thing helps. Thanks for the watch. Have a great weekend.

[@SgtRudySmith31bRet]

Nice review, clear and to the point. Definitely earned a like, wells see if you get the sub on the next video 😂. I ordered a micro dagger yesterday so well see.

[@Foxbodys4life]

Putting the pressure on me 😂.

[@driftitlikeyouownit]

I am very ecited for this. Slightly smaler with an integrated comp? Yea i think it's worth it

[@Foxbodys4life]

The weight is the biggest plus, it’s way lighter. If you are subbed I have been posting links daily to the offerings available, they are in full production mode so we should see drops regularly.

[@peterschmidt2849]

🇺🇸🤙🏻😎

[@AnthonyMihelich]

Bro rescue your cat from the trampoline 😂

[@Foxbodys4life]

He does what he wants just like the donkeys. They didn’t make an appearance in this video for a change 😂.

[@idahohusker7655]

We might as well pay $1000 for a micro because they seem to be rarer than a unicorn.

[@Foxbodys4life]

If you are subscribed I post when they are dropping. They have been dropping consistently at 4 but different models everyday.

[@idahohusker7655]

@@Foxbodys4life I am subscribed. I watched today with no luck but I’ll keep watching. Thank you

[@Rosa_Pedro]

My recommendation is to do more of a review of the gun on 2k rounds. It felt like a first shots or general overview video as opposed to a long term review

[@Foxbodys4life]

At the time it wasn’t really a long term, I had put the 2k through it relatively quick, over the span of 4-5 seasons. I was at the time trying to find any weaknesses to report back to the engineers for any improvements. It’s still been fantastic since and no problems. I’ll see about possibly making a long term review around the 3k mark.

[@SB-mw1bg]

A lot of wear on that barrel.

[@Foxbodys4life]

It’s all superficial, my compact dagger that has over 7k looks about the same and haven’t had any issues. The finish wear hasn’t changed any since the first 300 rounds.

[@SB-mw1bg]

@@Foxbodys4life good

[@1GunGurl]

Headed to the range with my micro dagger in the sniper green slide with the comp.

[@Foxbodys4life]

If you are shooting 115 it maybe picky, it loves 124s.

[@1GunGurl]

@@Foxbodys4life just finished up at the range. It shot 115, 124 and my HST and Critical defense reliably. No issues. I prefer 124 grain for my defense ammo.