Foxwell NT710 review BMW bi-directional all systems scanner

Foxwell NT710 BMW bi-directional full systems scanner review.
amazon link : a.co/d/8LjhB3Z
Discount code：48JAMOU9 (End Date，2023-4-30)
Hello, in this video I review the NT710 BMW scanner by Foxwell. I am really really amazed with this scan tool. I myself am not a BMW technician, so to be able to find modules and live data and activations as easily as I did was great. This truly is a good little scan tool that I recommend to anyone of all levels of experience. You cant go wrong with this one and it provides lifetime free updates!
I hope this review helps you make an educated decision on the product.
If you would like me to review a product for you I can be found on Instagram at
Master_Tech_Lou
Thank you for viewing.,
Lou Palomino

[@MULTI_TALENT_MEDIACHANNEL]

I think I'm gonna have the I'm the computer guy so I think I'm gonna have to flash the firmware to eYOUuanic

[@nickayivor8432]

👍 PROFICIENT Mercedes-Benz Master Tech Lou From Nick Ayivor from London England UK 🇬🇧 ⏰️ 15:01 good Afternoon

[@MULTI_TALENT_MEDIACHANNEL]

When I go to teach the transmission it asks me to go to reverse drive park neutral I did that it won't accept the code that's when I realized that you can't code with this **** thing so if you have any suggestions on what I should do cause I have a flashing malfunction the sign in my car won't start what I should do I never had any transmission problems before this

[@MasterTechLou]

Why would you have even entered that if there was no issue……… also thats not a coding. Its a transmission range sensor learning so it learns the correct gear selection positions

[@beeasty7683]

How do i get to VTG calibration or Transfer Case Calibration with the NT710? Thanks!

[@deepd4393]

Hey Mate, thanks for the video. I'm new to BMW and recently bought the 2021 X7 m50i GCC (middle east) Spec, just want to you ask you, will this scanner work for my model?

[@MasterTechLou]

I don’t see it listed on foxwells site, when I can I will check the scanner to see if it shows the model.

[@robsdeviceunknown]

Ya know. I have never had a BMW. All I hear is horror stories about Mercedes and BMW on expeneive parts, vehicles falling apart, labor expensive etc. I wondeer how true that is. I seen some BMW's that look beautiful that I would not mind owning but too scared to. Inever take my cars to a repair shop unless I have exhausted all options or it's simply a job too big for me. I have the Autel 808. Seems to work great so far but never tested it on BMW. I do wish you had the opportunity to test out these scanners on other brands.

[@MasterTechLou]

There is nothing that does compare to driving certain Mercedes and BMW’s . As long as you are aware that finding a qualified experienced tech is gonna cost you and so will the parts, or youre gonna have to learn how to work on them, they are not problematic cars they are just expensive to maintain for no reason at all other than the names. I personally dont fond value in cars. They are consumables. So its hard for me personally to justify a 1800$ over a 40$ for my dodge van. If and when they fail. Especially when I have kids to take care of. But that’s my personal preference. When all my kids are grown, and I can afford to throw money away on things like cars, heck yeah id love to own so many nice ones. But once you drive one you’ll never wanna go back to a chevy or toyota.

[@GreggDurbin]

I have a Mercedes C 300. IMO, they do cost more to maintain but they don’t break down as much. They don’t seem to be overly difficult to work on, for the things that I would do i.e. alternator power steering struts. I replaced the front driveshaft and drive shaft bearing. It wasn’t that bad. In that regard they seem to be cost-effective. Also, I love driving it. I plan to get 500,000 miles on mine.

[@MasterTechLou]

@@GreggDurbin heyo!

[@GreggDurbin]

@@MasterTechLou 😎 Awesome channel.

[@MasterTechLou]

@@GreggDurbin Thanks Gregg! My main goal is to help educate people on why they need things and or how to use things or share my experiences to help others. You know me, always trying to be in the spotlight!

[@jadinkiefer5611]

is it a subscription service

[@EmmadCheema-gv6iu]

Can this calibrate Mercedes Air suspension ?

[@DRLilly-qg5ke]

Can this scanner turn on the fuel pump to bleed the pump after changing the filter?

[@MasterTechLou]

I believe so as it can activate whatever the modules can activate

[@Dwines1219]

This is good. However, it is expensive to me, as you have to purchase or buy to all other models to have complete data or diagnostic on it.

[@MasterTechLou]

Yes, true , but a lot of scanners are going this way it seems. Some may only use scanners on personal cars and only own 2-3 brands so it may be cheaper to buy ala cart. It all depends on the person’s needs

[@kingkenny8245]

Can this tool code bmw fuel pump control module

[@MULTI_TALENT_MEDIACHANNEL]

It does not do ECU TCU coding Ford Mercedes RBMW or any other model car for example

[@ahyesstonks5375]

Mine does

[@jeffarnett2214]

I have a Foxwell 510 something something.. Love it for my Merc. Bi-directional and includes the Rodeo for ABC. Quality product...

[@MasterTechLou]

Right on

[@MULTI_TALENT_MEDIACHANNEL]

HEY I BOUGHT THAT N710 It erased the gear ratio on my Mercedes-benz while the engine was running I turned the engine off returned back to the car and now it's in immobilizer mode and won't start and won't startHELP HELP PLZ How do I reprogram the transmission on my GL450 278X 165

[@MasterTechLou]

Nothing can erase the gear ratio. But if youre not careful you can wipe out the drive authorization info. If that was done you will need to have the dealer replace the transmission control unit

[@MULTI_TALENT_MEDIACHANNEL]

@@MasterTechLou It says driver authorization activated as well I **** with that **** but I see what you're talking about but the cars seem like it's stuck in reverse or something like I guess when it shook I don't know if this immobilized mode because I do see that it says let limp mode home activated mode and it says immobilize but it said driver authorization activated but the car won't start but yeah the scanner it says teach in transmission Rain sensor and when I try to do that it says that it clears the cold and then you know erase the cold then when I scan it again the code is still there it's a permanent sensor but it won't teach it in or it won't erase the code p2008

[@MULTI_TALENT_MEDIACHANNEL]

@@MasterTechLou No after that II stopped talking with the scanner everything that as far as that driver Authorization iit say activated I see all that stuff which you're talking about you could play that **** but I'm not doing it it just keeps saying transmission right sensor range sensor Not taught in Even when I tried to teach it in it won't do it it is the permanent p2008 code

[@glenglene8473]

can you reset transfer case?

[@DaniloBarbosa-fq9ex]

Ele faz teste de atuadores?

[@arjunchand09]

I see the BMW says Chassis stabilization did you know what was wrong with the vehicle? I just got that light on my car. Not sure what it is. It says chassis stabilization drive moderately, but doesn’t affect the car performance at all.

[@MasterTechLou]

Nothing was wrong with the vehicle I scanned. Often times there will be codes with no symptoms. You will have to have the car scanned to get the codes to know what to do from there. Best of luck.

[@242sp]

Got this for myself for Christmas last year, with the Toyota and Honda software, after alot of research. Great little unit, still figuring out all it can do, not cheap but not expensive when you look at the cost per hour in a shop. Great review!

[@MasterTechLou]

Thanks! I do like this one a lot

[@cody967]

How about subscription costs? Alot of scanners won't give u updates or allow bi directional if ur not up to date 💩🗑️🗑️

[@MikeHoldridge]

Compatible with c43 amg (W205)?

[@Jake-pq3iz]

How does this compare to the XTool 8?

[@MasterTechLou]

@@Jake-pq3iz I feel the xtool is superior in it can do more models, but I think foxwell has more experience. Hard to say

[@davidgallegos5323]

Thanks for sharing I had recently got a foxwell for my 2001 7.3 and seems to be a good system for it if you can answer this the overhead gpm in my truck how reliable are they thanks again god bless

[@MasterTechLou]

They are actually pretty accurate within 1-2 mpg depending on how often you reset it. Easy to test. Fill tank, reset Indicator. Drive to half talk roughly. Fill tank, then divide miles driven by fuel filled that will Give you the number.

[@ForChungCookie]

Can this unit conduct test on EVAP modules? Like activating the Purge Valve and Leak Diagnosis Module?

[@MasterTechLou]

@@ForChungCookie yes it should, this thing is very functional

[@ForChungCookie]

@@MasterTechLou Nice! I just ordered mine. Can’t wait to put it to good use. Thank you the quick response.

[@MasterTechLou]

@@ForChungCookie let us know how it works out for you

[@KnightSpirit001]

Thanks for the review do you have a new discount code to use?

[@MasterTechLou]

They are currently 30$ off and have a 18$ coupon and if you choose the promotion you get a free gift as well. thats all I see.

[@KnightSpirit001]

Thanks for your quick reply! Can this provide error code and live data on ABS sensors for E36 model?@@MasterTechLou

[@MasterTechLou]

@@KnightSpirit001 I believe so. I don’t see why not.

[@siyingwang2174]

Hello, I have tried this scanner and it reads all other modules but ABS...does this scanner have ADS capability?@@MasterTechLou

[@MasterTechLou]

@@siyingwang2174 you said ads and then abs, if its suspension sometimes aftermarket ones wont read suspension. Try manually selecting different years or models to try and trick the scanner.

[@ANDY-we7mr]

LOU I HAVE 3 DIFFERENT AULTEL DIAGNOSTIS ALL DIFFERENT I WOULD LIKE ONE THAT DOES EVERY THING WHAT WOULD YOU RECOMMEND LOU I FANCEY A LAUNCH V111 PAD BUT THAT WILL BE LATER ON LOU GOOD VIDEO BY THE WAY

[@IcarusTECH]

Only good for BMW, need to pay $60-100 USD for each extra brand, can only add one extra at a time, PASS

[@edishyti1]

How much does it cost to add another car brand in their shop

[@Slim3rC10]

Around 80 USD

[@cyberstatus575]

Reset ESS?

[@Watchman999]

I love this scanner but I had a weird thing happen where EPS light and engine light started flashing at idle and then when I went to the control module screen to get multiple fault codes and hit erase it reset the whole PCM or ECM. Scared the heck out of me.

[@HarryESwan]

Could I use this to change the SMG transmission fluid?

[@MasterTechLou]

Yes I believe you can

[@HarryESwan]

​@@MasterTechLouThank you!

[@wanndsonleite3360]

Comprei recentemente um NT710 da foxwell, entretando na barra de diagnóstico nao aparece as marcas,modelos e nem sistema. Só ler DTC. Alquem pode me dizer o que aconteceu e como posso resolver?

[@cognac8297]

Does it shut and open evap vent solenoid and purge valves for hondas😊

[@MalcolmSmithRestricted]

How does the system work for Mercedes

[@MasterTechLou]

This one is strictly BMW, I havnt tried the mercedes software on here.

[@jeffgalanos3207]

Hello Lou, what u thing a scann tool like xtool or Autel for corolla 2018, ??

[@MasterTechLou]

Depends on your intentions, but xtool for cost if youre just worried about 1 make of car. Or try icarsoft v3.0 for toyota 🤷🏼‍♂️

[@jeffgalanos3207]

@@MasterTechLou , u thing is Beter the xtool d8 for data and anything at all pls let me know thanks

[@MasterTechLou]

@@jeffgalanos3207 yes, it seems very much like Autel software. Very similar

[@41326JDG]

For MB GL 2016 which one will be your choice this one or the Xtool A30M?

[@rogerhobday8369]

Would like to hear your opinion of a Topdon Artidiag600s. At the moment I am torn between foxwell and TOPDON.

[@MasterTechLou]

Not sure what model foxwell youre looking at but this one in the video blows away the topdon 600. The 600 looks to be an decent scanner but not near the functions of the nt710.

[@rogerhobday8369]

@@MasterTechLou yes I was half expecting that as there is almost $100 difference between the two on ebay. I was building high performance engines in the 70's and some dealership work in the late 80's. Had very little exposure to OBD2 but still like to do my own car work where possible. I think that a good obd2 scanner should be part of every tool box, a decent set of spanners can cost $200 - $300. Not much good if you don't know where to apply them.

[@MasterTechLou]

Well I reached out to topdon and they sent me a 600s to review 😇.

[@rogerhobday8369]

​@@MasterTechLou fantastic Lou, my understanding is that the foxwell nt710 is probably achieves more functions but if I wasn't too concerned about functions I would rarely or never use then the Topdon Artidiag600s would be the best value for money choice. My current vehicles are Ford territory sz diesel v6 and Holden VE Commodore. I prefer to work on these cars myself where ever possible. So if I don't need a 10 ton press or a hoist I do any maintenance /repairs. In the last 20 years if you don't have a scan tool you can cause more problems ($$$) than fixes. I look forward to seeing your review!

[@rogerhobday8369]

@@MasterTechLou Hi Lou I know you are busy running a business but I am wondering if you have had a chance to look at the Topdon Artidiag600s yet.

[@Connormmmm]

Hey mate looking for something to read E53 X5s including live data would this be capable?

[@edgars00789]

Which one is for a Nissan Rogue

[@McCarthyism_by_Youtube]

Autel MaxiCOM

[@cristianledesma7482]

Does it do ECU programming?

[@MasterTechLou]

I dont think so no

[@mikecastro2158]

Just checked the video out..Can it calibrate the blends door for the AC unit?

[@MasterTechLou]

Probably especially since its as thorough as it is

[@bigt3k709]

Hi, I've been speaking to sellers of this item and thought I'd check your video out, I understand you can change the system to buy other vehicles because I need it for a honda. Any idea about gearbox learning procedures etc? Cheers

[@MasterTechLou]

I have not personally used it on a honda but with the capability I seen with the bmw I fully believe if there’s a factory function to relearn a transmission then this I would think would do it as well.

[@dappa311]

Excellent video my man

[@MasterTechLou]

Thanks I appreciate that!

[@Killahkron1992]

Does this support Tesla Epb?

[@Connormmmm]

Hey mate looking for something to read E53 X5s including live data would this be capable?

[@MasterTechLou]

I wish I could answer that I am a Mercedes guy by trade BMWs are new to me.

[@danielleigh2389]

CMEDS this tool will be very capable for live data on the e53.

[@603adventures9]

Does this work maserati

[@bahirdinmohammed6307]

I need toyota& melti Vachel scam tool

[@bahirdinmohammed6307]

I need toyota& melti Vachel scam tool

[@AlanBurnham]

Can it run a DMTL test? That function seems to be almost as rare as hen's teeth in the "cheap" prosumer scan tool range.

[@MasterTechLou]

Im not fluent in BMW, what is a DMTL test?

[@AlanBurnham]

@@MasterTechLou Diagnostic Module for Tank Leakage. It is BMW's evap monitoring solution. The DMTL pump pressurizes the tank and measures the loss. The DMTL test will force the OBDII evap monitor to complete. I got a response on Amazon saying the NT710 can do it but the NT809BT can't. Foxwell tech support says my car doesn't support the function at all. Launch and Topdon do support the function on older models but not mine; I suspect that is the case for Foxwell too but Foxwell doesn't provide a breakdown like the other two as far as I can tell.

[@MasterTechLou]

@@AlanBurnham ah gotcha we just started using those in mercedes but I have experience with audi/vw and those. I wish I had the answers but I have no bmw to plug into and check for you. My apologies. If I get lucky to try one I will update.

[@nicolasvidal8955]

sirve para maxus?

[@oleksandriakymchuk8728]

Which one is better: Foxwell NT710 or launch creader elite bmw?

[@MasterTechLou]

I think they will both be near identical but I do like the foxwell

[@oleksandriakymchuk8728]

@@MasterTechLou thank you

[@cognac8297]

The $800 one at harbor freight is the only good 1

[@davedunn]

You lost me when you referred to a USB-A connector as a "type C" connector.

[@MasterTechLou]

@@davedunn if thats all you focused on (because if memory serves not everyone can be perfect) then I’m glad I lost you. Glad your comment made you feel better about yourself 🧠.

[@abdulwahedy5528]

The battery of scanner will not work after 3 years.

[@devo3243]

More generic tools like this usually use generic parts. You can probably find a new battery for it somewhere

[@DM-sg3cj]

A Beamer with a scanner hooked up to it, there's something you never see. /S LOL.

[@melantheoszimurri9981]

How do you love it and you barely know how to use it

[@MasterTechLou]

Because I have enough experience to know when a product is junk or not. I been doing this a long time, I know how to use scanners, I dont know how to speak fluent bmw with them. Theres a difference. The foxwells I have for BMW are really very good units for what they can do. I hope that answers your question……….

[@bahirdinmohammed6307]

I need toyota& melti Vachel scam tool

[@kabusanchez5622]

does it work in MERCEDES?...thank you wich is good for M BENZ/.?