FPV | LiPo Battery Capacity Testing | Measurement |

Showing how I test capacity of several sets of 3S and 4S LiPo packs I fly on a regular basis.

[@MangoJim90]

Will try this method. From full 4.2/sell to 3.5/s👍🥳

[@RCRoads]

Great job. You really went the extra mile on this video. I just run rc cars and it's probably not as critical as airplanes or quads. Thanks for sharing your techniques for checking cell voltage and such. It's quite helpful. 👍👍

[@TommyTester]

Thanks, and keep having FUN!

[@electroddxful]

I like those Tatu batteries. They work really well. 🙏👍🙏👍👍

[@TommyTester]

Pretty much all my 2S and 3S have been Tattus, and only the 850s have giving me puffing trouble. I do admit I've keep some fully charged which I've now stopped doing. Recently I've been moving to RDQ packs to see how well they hold up. Their 3S850 is only 54 grams vs. Tattu's 76 grams. That's significant. Do you use any 3S packs?

[@Iinustechtips]

@@TommyTester You should try Zeee, they are pretty cheap and they haven't puffed up for me. I have been using them for about 18 months. 1500mah 134grams. 2 batteries for 34$. 120c

[@TommyTester]

@@Iinustechtips Thanks. I'll do that!

[@outerzonerc777]

Hello, thanks for making the video. 1 question I have is are you saying that you discharged from 4.2 to 3.5 a cell and you achieved right around 850mah on a 850mah battery? So in theory I should be able to discharge a 8000 MAH from 4.2 down to 3.5 a cell and I should achieve around 8000mah if the battery is good and the battery label is accurate?