Overclock GPU

Socials
linktr.ee/FR33THY
Windows Keys
Code: FR33THY
www.bnh-softwa...
PC Service
fr33thytweaks....
GPU Z
www.techpoweru...
INSPECTOR
github.com/Orb...
MSI AFTERBURNER
www.guru3d.com...
HEAVEN
benchmark.unig...
SUPERPOSITION
benchmark.unig...
FURMARK
geeks3d.com/fu...
FOR AMD - MoreClockTool
www.igorslab.d...
NVFLASH
www.techpoweru...
VBIOS
www.techpoweru...
P0 STATE (NVIDIA ONLY)
github.com/fr3...

[@EODYT]

Just for the people flashing gpus If you don't get a display Use different ports on your graphics cards my friend had a issue with his 4090 strix where it would be backscreen (this should be solution) as fr33thy did say FLASH AT YOUR OWN RISK

[@HusKerrs]

That's hilarious that you just mentioned my name as I came here by chance while looking at one of your other videos hahah. Gonna follow this to OC my 4090 myself

[@cliche_AF]

Great video, forcing GPU boost 3 is super important for tarkov cause half the time the gpu isn't boosting at all especially on the new streets map my 4090 is stuck at the default core speed.

[@Fragil1ty]

Good video over all, a little long but better to be too long and not miss anything than be too short and barely go over anything. Finally, Just a tip or more of a suggestion really, if you are doing longer form videos, it may be advantageous to include timestamps (just for ease of use). But good job on getting good content out there on a more frequent basis! Keep it up man! Oh and for anyone interested in my own personal settings for my 4090 (Suprim X). I currently run 2 profiles. 1. 150/1500 (max sliders etc) and 2. 2805 @ 1025mv / 1150 mem as I'd rather just undervolt my GPU and not push it to it's limits every gaming session lol as the difference in performance isn't even noticeable on a game to game to basis, imho.

[@julian-jwfl]

I have the same card as you but I can't run my mem that high unfortunately but I can still hit 165/1000 which is great for me! =D Good stuff bro, thanks for sharing!

[@Zancers]

Underclocking next?

[@Imagine-88]

most underrated channel!

[@thjthyjm]

On my testing rtx 3060 oc card(i know it's obsolete) i got these *stable >Mem clock 8900mhz (+1400) >core clock 2068mhz (+200) >temps were between 65-72 C

[@syafinorzizan9968]

any significance improvement?

[@chkchktv]

Thanks for the video prompt to flash my AMD gpu bios - great resource as always

[@R3LAXMUSIC888]

Ive had no issues with msi afterburner on my 6700xt but i pretty much followed your old amd guide where you installed the full driver then transferred the numbers to msi ab with the minimal driver. I like to use AB to control fan curve and cap frames with rivatuna

[@w9s992]

Hi FR33THY your config files for games optimization arent working, I always use them, please update the URLs pages in your channel.

[@r3demptionnn]

what if I have the resize bar enabled in bios but it's not showing in NVIDIA Profile Inspector ?

[@broxirus1889]

Solid video, great refresher for myself!

[@thedoctor359]

as professional as always Bro, u amazing! 😘

[@zoicware]

my room was feeling a bit cold before this thanks chris

[@NulJern]

so are you saying high end amd cards don't overclock well? like xtx? and you should be able to get your memory speed up to 2714

[@_SkoR]

After following this I can now game at 8k 240fps thanks chris!

[@BaBaNaNaBa]

display port 4.0? with 16 inch length? 😂

[@Haxete]

@@BaBaNaNaBa delidded display port 4.2

[@FR33THY]

8k 120hz gaming possible on 4090 :D

[@Haxete]

​@@FR33THYI just decided to flash bios at 5AM on my 3080 gaming x trio after running default (but once flashed when bios with support for RBAR dropped 3 years ago) Now i went from MSINV389MH.124 to MSINV389MH.140 (Suprim X Bios) Board power limit Target: 340.0 W Limit: 350.0 W Adj. Range: -71%, +3% > Board power limit Target: 370.0 W Limit: 430.0 W Adj. Range: -73%, +16% Boost Clock: 1815 MHz > 1905 MHz Now i just have to test stability,temps and see if i can OC further. I also got really scared because the USB i put my backup and NVFlash on was actually kinda faulty and unstable, it disconnected and reconnected randomly when i was back into windows, good thing i didnt flash anything FROM that USB *Edit, i also hade to reflash again to MSINV389MH.162 since .140 had no ReBar support. **Sidenote, for some reason, on MSI x670e board, enabling "memory context restore" in order to boot a bit faster, i just got "BAD_SYSTEM_CONFIGURATION" bluescreen. i realised that in the middle of this adventure.

[@choi8611]

i have a 4080 super and it displays that it supports pcie x16 4.0 yet mine is at pcie x16 1.0? do i need to reinstall my gpu? i have a msi b650m gaming plus wifi mother board

[@christianparsons7495]

does this method work on heaven with my 3080 because it has the memory error correction?

[@marcinszef8982]

Hello, I have a question, when I play valorant only, is it better to have the resize bar on or off?

[@splint3rfps]

i have a 3080 which rebar settings should i go for to play counter strike 2?

[@moelester3758]

I have an RTX 3050 laptop (yeah I know) which had a 60W TDP 😭😭 and on top of that the +15W Dynamic Boost never worked. Fortunately I found another vBIOS from a very similar model with a higher 80W TDP and succesfully flashed it. There has been a slight improvement and thanks to undervolting the temps are also pretty good. I'm pretty happy overall (outside of owning a 3050 laptop)

[@WazZzap97]

got some issues with the morepowerclock tool gpu (rx 6900xt) oc is quiete nice but if i set the memory timing to fast timing its dropping under load from 2000 to 1100mhz and then back up to 1988 while ingame i feel the drops cant play like i want if i revert back to default memory timings not fast timing its not dropping while gaming or benchmark it still is between 1980-1988 maybe you can help?

[@uul4289]

cpu and memory tuning video next? for amd

[@FR33THY]

thats not so easy, depends on board/ram/cpu/temps and lottery

[@abijeetrs6522]

What is your room temp usually ?

[@kpm4620]

Resize bar works for me when enabling/disabling it in adrenaline. I’ve never had to go into bios to set it

[@FR33THY]

its still on even if turned off in driver and ruins 0.1% lows in warzone i tested this on multiple clients pcs with 7900xt and 7900xtx

[@kpm4620]

@@FR33THY interesting. I assumed it did what I wanted it to do since I could actually see a huge improvement on my 1% lows. Overall FPS dropped some, but I’m still pushing 300+ at 1440p

[@kpm4620]

@@FR33THY okay, I just tested both scenarios (rebar off in adrenaline vs bios). I lost 5 fps in avg fps and 11 fps in low 1st with rebar off in bios. Not sure how it didn’t work for you

[@ibrahimoff1855]

Hi Fr33thy please Rtx 3060 laptop is Windows Acer Nitro 5 ?

[@chriswinters522]

This guy is a godsend!

[@troyfuller35]

I have a 4090 and run a stable 250 core clock, very minimal issues at 280 Mem clock is at 2k with no issues Gpu is at 3015 boosted with no issues at all, Can push it more I believe but this is a safe spot, time to test it on a few games Temp around 64 on gpu

[@Steqp]

I just turn off RMPowerFeature and it overclocks its self

[@praise_val]

yo chris could you upload the files for the windows optimization video again pls, thank u

[@FR33THY]

use github and the new guide

[@George-um2vc]

Fr33thy the Goat!

[@GorillasRage]

Can u give me settings for rtx tuf 3070ti :)

[@FR33THY]

move the sliders up

[@dracktw]

130clock 1300 mem core on my msi card boiiii

[@kolioludiq9663]

i give a thumb but do one for amd.

[@AI.Musixia]

overclockinng is nice for benchmarks, but for me its 100% useless, undervolting is the king of gaming 🤫 in german wattage prices sucks hard so undervolting ist the best befor i undervolted it my 11liters itx pc with linux it has: (now a tiny meme: "i use arch btw." 🤣🤣🤣) 650watts at oc bench: 12000apu gpu 17000 at gaming: 1440p 100-121fps 4k 80-87fps watts apu 72-82 gpu 180-371 watts, temps/jnc: apu 60-87c gpu 63-98c jnc 65-111c clock: 2950mts mv: 1250 at stock 500watts bench: 10800apu gpu 15000 at gaming: 1440p 95-98fps 4k 65-70fps watts apu 5-62 gpu 120-230 watts, temps/jnc: apu 45-75c gpu 48-85c jnc 48-90c clock: 2640mts mv: 1200 at undervolting/underclocking 300watts bench: 9200apu gpu 13500 at gaming: 1440p 103-107fps 4k 77-80fps watts apu 1-42 gpu 14-88 watts, temps/jnc: apu 24-50c gpu 34-72c jnc 36-72c clock: 1950mts mv: 853 (the undervolting and underclocking i tested to a max of 1600mts but the fps gets too low at end i go higher but it was 69watts but too -25%fps 😂)

[@HoGuEE_]

i OC my 3080ti and idk what i did but my gpu died so i RMA it and i dont really wanna do it again

[@Koeras16]

@@pav1u Since we aren't able to change the voltage curve in any meaningful way, it is indeed pretty impossible to kill a gpu through just an overclock. The software may crash badly though. Less knowledgeable people might be stuck due to not knowing how to properly reinstall drivers.

[@zc6635]

yuh

[@ReaperHackz]

Amazing video!

[@watch3r9]

whats your twitter doc?

[@RAWDOG963]

is there a revert file for the 3 PO thing?