I like your style of filming and music DALRAE! Bless you! Thanks for the video! My case is coming tomorrow hopefully!🔥
@ellypsis603 Жыл бұрын
Cool & Relaxing, Great Build!!! going to make one in the fractal ridge soon ;)
@SviatoslavPetrov7 ай бұрын
May be, issue with power cable have solution. For example Noctua have 2 positions of AM4 mounting bracket adapter for radiator displacement. While making this build, I also have this mistake, but I start thinking, why it happen with compatible CPU cooler, & find solution by reading doc`s more carefully.
@JimJohnson1Ай бұрын
so did you leave the power supply cable just hanging out?
@MrPancasona Жыл бұрын
Setup dan instalasinya cukup bagus perpaduan antara msi b650 dengan rtx 3080 yg dibalut dengan fractal ridge😂 saya akan coba untuk dapat mengikuti anda🙏👍
@BassManStrikes Жыл бұрын
Why the ID cooling fan vs the one the AXP 120 comes with? Just curios
@DalraeMyo Жыл бұрын
I changed it because it received good reviews from the community. But I didn't feel like it was better than I thought.
@JMNovak10112 ай бұрын
What ATX PS cables were used?
@realiesOne Жыл бұрын
did you manage to put in the psu cable socket? what about rotating the CPU cooler to be able to do so? what about the noise levels while the GPU and CPU are at 100%?
@DalraeMyo Жыл бұрын
For AMD sockets, 90 degree rotation was not possible. The reason for not rotating 180 degrees was for VRM cooling. It didn't feel like it was quiet during the 100% load. The noise from the 140mm cooler bundled is louder than expected.
@realiesOne Жыл бұрын
@@DalraeMyo was 180-degree rotation possible? I will be building an AM4 system using the same cooler and case very soon and wonder how to avoid having the power cable socket detached from the case.
@DalraeMyo Жыл бұрын
@@realiesOne It can be installed by turning 180 degrees. However, there is a height limit when installing the tuning memory, and it is not certain whether the power connector interferes.
@蛇王-y9b Жыл бұрын
this case has 2 millions of screws
@realiesOne Жыл бұрын
@@蛇王-y9b implying?
@SNAPSHOTREVIEW Жыл бұрын
와! 영상 잘 보고가요. 납작이인데 들어갈건 다 들어가는군요 :) 7900 소비전력하고 발열 엄청 착하네요~
@BaronWuffet Жыл бұрын
Do you experience any issue with your included riser? It's a known issue for this case. Considering to buy this case for my next build, but this issue gets me worried.
@DalraeMyo Жыл бұрын
At the time of purchase, I was aware of the issue that there was a problem with the riser card if I used the Radeon graphics card. Fortunately, I used an Nvidia graphics card, and I didn't find anything else wrong. In the case of Korea, the improved riser card is currently collected and replaced at the place of purchase, but I don't know how it is overseas.
@BaronWuffet Жыл бұрын
@@DalraeMyo I didn't know it'd behave differently with Nvidia GPUs, thank you for clarifying.
@sweeleangloh Жыл бұрын
Nice👍...I bet the white version is equally good looking as well🙂
@135H_ Жыл бұрын
서브 컴퓨터로 5600x에 3070 달아뒀는데 글카 온도는 상당히 착하고..시퓨는 좀 높은편이긴 합니다만 신경쓰일정도는 아니었습니다..(아마 흡기에 비해 부족한 배기가...문제일듯 싶은) 다만 번들팬 풀로드시 소음이 장난 아닌...시퓨 쿨러 id cooling에 is60 에보에 녹투아팬 달면 나름 온도 준수하게 커버 됩니다 오픈형 itx에서 넘어온건데 생각보다 높은편 아니었어요..게다가 얇아서 전 그냥 창가에 두고 쓰는지라 ㅋㅋㅋ.. 다른 케이스로 넘어갈까 싶다가도 컴 케이스가 상당히 얇아서 편한지라 못넘어가겠네요..라이저 케이블을 2번을 넘어가는것도 좀 거슬리긴 하지만...
@OldDolio312 Жыл бұрын
Would the cooler have fit with the motherboard nvme fan?
@stellina45578 ай бұрын
Milo 12를 쓰려는데 7900의 최대 온도를 80도 미만으로 발열을 잡으려면 어떻게 해야하나여??
@DalraeMyo8 ай бұрын
단순히 온도만 잡고싶다면(혹은 복잡한 설정이 싫다면), TJMAX값을 80입력하면 CPU가 80도가 넘지않는선에서 알아서 클럭을 조절합니다.
@stellina45578 ай бұрын
@@DalraeMyo 그러면 A620 칩셋에서도 설정이 가능하나여??
@DalraeMyo8 ай бұрын
제가 A620칩셋 모델은 기가바이트 A620i AX모델에서만 잠깐 테스트했는데, 초기 버전 바이오스에서 PBO관련설정이 가능했습니다. (이후 버전부터는 메뉴항목이 사라졌습니다.)@@stellina4557
@stellina45578 ай бұрын
@@DalraeMyo 그냥 iF13에 수랭달아서 쓰는게 좋겠네여;;;;;
@베르스퍼-h3j Жыл бұрын
how about noise of power
@DalraeMyo Жыл бұрын
I hardly felt any PSU noise. The SF750 PSU is a very quiet product.
@psk2912 Жыл бұрын
SFX L 규격의 1000W파워가 실버스톤에있던데 SFX L이면 SFX보다는 조금더크다는거겠죠?
@DalraeMyo Жыл бұрын
SFX-L의 경우 SFX규격보다 옆으로 좀더 긴 길이를 가지고있습니다.
@MobileDecay Жыл бұрын
1:28 I tried to move the Nvidia control panel out of the way on an all amd build. 🤣