🛑 The BEST WAY To Cool AMD CPU 😲 (Kryosheet vs Direct die vs HeatSpreader) 😱

[@jwhitaker81]

Kryosheet is great for GPUs and laptops. Anywhere where pump out is an issue. On GPUs you get a really stable hot spot temp with temps compared to fresh Kryonaut application. The laptops I've put it in I've seen as much as 10C decreases in temps. Kryosheet does well under high heat loads as well.

[@metabang03]

To the guy who is in the video. You said amd problem, makes it boot slowly... my 7800x3d and if I has any am5 cpu, I press my power button, and I'm in windows bythe time I sitn8n my chair... 8 - 10 seconds... you just don't know how to optomize am5. Noob

About the CryoSheet, why not give ptm7950 a try?

[@mapscorp]

PTM7950 by Honeywell its nuts too, better than regular paste particular in terms off maintenance, and heat-dissiáton efficiency. I can confirm.

[@andreiclawhammer]

Jufes, why did you pick the ProArt over the Hero for your workstation? Is it just for the 10Gbit LAN, or is it because it's overall the superior motherboard between the two?

[@FrameChasers]

Youl see why in the build video

[@HotDogHunterX]

​@@FrameChasersprobably the similar reason I'm considering it. It has 10bge AND you can throw on a PCIe capture card onto the Chipset PCIe slot and maybe a Intel Optane in the second PCIe slot.

[@Syron21]

I read that the "Phasesheet" needs to reach 60 degrees up to 10 times, to work normal. (says their webpage)

[@Alex-ii5pm]

He didn't use the phasesheet

[@Syron21]

@@Alex-ii5pm ah ok

[@AutomatedUser]

you CAN use liquid metal on copper, you cannot on aluminum. Cheers mate.

[@Solrac-Siul]

Kryosheet kind of works better with intel cpu's. it completely replaced thermal paste for me since it will perform within margin of error (either positive or negative) of a good thermal paste with the advantage that the performance will not suffer changes over time.

[@Sokenro]

I really look forward to your next thermal paste comparison video, it’s so hard to find good data comparing top thermal pastes. I hope you put arctic mx6 in your comparison.

[@TheRealDlo]

Same

[@funkyd04]

Test the ptm 7950 paste. Supposedly they're impervious to heat pumping, last a long time, and are better than other pastes, slightly trailing liquid metal in performance

[@scuffed69420]

Would love to see the ptm7950 in the thermal paste comparison.

[@Jacko_486]

Interesting video. I have de-lidded a 6700k and using liquid metal replaced the original IHS. The temperature did drop by about 10°C (cinebench test). The issue has always been about getting the heat out of the tiny surface area of the die and liquid metal is the best. However, after about a year the temperatures had gone up and I can only guess why. Had the liquid metal migrated south as reports of putting the PS5 in the vertical stand? I replaced the liquid metal with MX4 but did notice the IHS had become tarnished.

[@russb3n]

Oh man I was just about to tackle this project tomorrow myself direct die and Kryosheet you saved me so much time and head palms. Just sold my 7800x3d and have a 9800x3d on a Asus X870-I itx build. I hear Kingpin Cooling KPx Thermal Grease is really good stuff. I don’t want any maintenance if I have to.

[@bucketofampz]

this is a video that needs to be made for someone like me who is looking to build a new PC and has been out of the loop for 3 or 4 years

[@ColinDyckes]

Jufes: Consider cutting a sponge surround for the non direct die liquid metal solution to help prevent any LM leakage.

[@heyitsjel]

Kryosheet is also great for direct die applications - or even between the IHS and die... a safer option than liquid metal for sure, and you won't have the contact pressure issue.

[@itraumatik6550]

KryoSheet in combination with the Intel Mycro Direct Die V1 was unable to achieve any significant improvements in terms of temperature and was problematic in terms of contact pressure. For this reason, we cannot recommend thermal pads because their additional thickness has a strong influence on the contact pressure and can therefore impair the function

[@HotDogHunterX]

Nice Juf, you have a Proart X870e. Curious, what did you manage to run your memory at in terms of primary timings and MT/s on that board?

[@thelasthallow]

the two best tested thermal pasts that i have found to be tested by multiple sources shows that something like a Noctua NT-H2 and Coolermaster Cryofuze 5 to be among the top. others trade places like IC Diamond but its $30 for a small tube because it has actual diamond shavings in it.

[@Ray88G]

There's an NH-D15 direct die AM5 kit available. Me personally I would go with air cooling because I had my look leak once .

[@danejasho]

One of your best videos, from my perspective. Thank you.

[@LiveType]

Try some ptm7950. Very long life.

[@AutomatedUser]

man, i really found you abrasive (yet informative) when i first found you, but i'm sure glad i took you seriously and saved my 14900k from the damage that would have been done by now. Thank you SIR!

[@camplethargic8]

Imagine a heat transfer matrix that combines the superior thermal conductivity of liquid metal, with the application convenience of a Kryosheet. So the risk of stray metal getting to your board's vitals is lessened (because the liquid metal is ab-/adsorbed to the sheet in a precise amount that eliminates excess). Are you reading der8auer?

[@benigno7209]

What did you put between the die & the new heatspreader?

[@NotDelpize]

@FrameChasers i still have 13900k , 4080 and with ddr4 Dual Rank 4000mhz cl14-15-15 with subs and third timings tweaked. Do you think is it really worth me to upgrade ddr5 platform? I really need your thoughts about this

[@_GIDO]

This is a videa i was waiting for! thank you man!

[@TheRealDlo]

Really appreciate your approach and explanation in this video. All types of gamers should have learned something.

[@youssefsordo1656]

Saving those two degrees makes such big difference

[@recapturedcountry]

will 2 kryosheets still transfer the heat the same. Or is it a 1 and done before lost returns.

[@Yuriy.Winnig]

Bro, are you going to do a review of 285K?

[@arthurmelo3472]

Yes.

[@FrameChasers]

It loses in gaming, review finished

[@Yuriy.Winnig]

@@FrameChasers I'd still like to know by how much, as I also work on my PC. It might be faster for my work. Also, asides of other Z890 upgrades, Thunderbolt 5 would also improve my workflow.

[@Alex-ii5pm]

​@@Yuriy.Winnig it will perform pretty much the same as the 265k.

[@CrazyCranker]

@@FrameChasers lmao!

[@paultapper9300]

What thermal paste is under the heat spreader? do liquid metal too? PS: How hard is it o get the CPU out of the heat spreader, and does the paste (whatever it is) cause the CPU to be pulled out of the AM5 socket when you lift the heat spreader??? Can you end up damaging the CPU trying to get it out of the heat spreader.

[@benigno7209]

This is what I want to know, whats between the die and the new heatspreader matters just as much.

[@zlibz4582]

you should really try noctua nt-h2 paste its pretty much at the top , also try the arctic mx-6

[@cibelal6293]

What happen to the dip? Is it not a problem anymore?

[@stefanrenn-jones9452]

Thermal grizzly Kryonaut thermal grease paste, with an arctic liquid freezer ii 280 A-RGB, gigabyte x670 gaming x AX, view 71 TG, 7800x3d, Gigabyte Radeon 7900xtx, Trident Z5 neo rgb cl30 6000mhz 32gb, Thermaltake toughpower gf3 1200w. 12 months no problems. First DYI. All parts delivered to the doorstep, unbroken! 🤣PC part picker, plus mobo reviews etc. Easiest mobo to build on, very competitive water cooler, best cpu, massive case, best value high-end ram/gpu. PSU half price (probably overkill). Specifically bought the expo trident z5 neo, not the intel xmp. Slightly different box, slightly different ram.

[@marcmathes41]

thank you for the content. also i like the way your testing this.

[@slackary8563]

Kryosheet loses performance after being reused. It’s not terrible but it is a couple degrees.

[@velo1337]

where is the 285k max oc video?

[@griffin1366]

Please try; Noctua NT1 (?) Arctic MX-5 Thermal pastes!

[@j.p.h.8126]

The only way to cool anything is LN2 right? 🤣

[@CVLova]

ur cpu block cracked it looked like xD

[@recapturedcountry]

I basically just play Rust. Even though i'm still on a 690 max extreme with 14900ks, 4090, and ram running at 6400. I just can't see up grading yet. AS jufes says its still doing what i need it to do. Though that 5090 i'm gonna have to have that . End of video Kitty love

[@johnp9407]

we should have seen this coming since lga 1700

[@feynex31]

Amd shitlet one ccd is trash always trash company still good vid

[@justinshinn6218]

Have you ever considered replacing your CPU Waterblock? I had that velocity in the past and it never performed well due to the mounting pressure. I’m currently using the IceMan Cooler, even better than my Watercool HEATKILLER IV Pro.

[@bumpahhi]

5:59 cores did not boost any higher either?

[@walllec]

@3:45 maybe change face to current one?

[@ZUZucyyp]

Hello how is boot time in x870e hero vs x670e ?

[@6r3ys0n]

I moved back to the 14900K from AM5 I just couldn't take it anymore bro but this is interesting!

[@arthurmelo3472]

Why?

[@ghostlyinterceptor7756]

Tbh wait till amd does something about the bandwidth and then its when you wanna jump to am5

[@stevesonger1]

Same here but I don't think everyone sees the little things I noticed, or it doesn't bother them. I haven't experienced any problems with the 14900k the past year either

[@ColinDyckes]

I'm happy to stick with my 14900KS direct die with a MoRa 420 and the Mycro direct die Pro block with Conductonaut LM.

[@mamadz7493]

try curve optimizer -30-40 + pbo

[@funkydmunky1]

beauty shit bro Coo loo coo coo, coo coo coo coo

[@TheBoltcranck]

RealState HeatSpreader!

[@wandameadows5736]

Air Cooling is the best

[@raminpro9765]

wonderfull you dont kill mobo or cpu ,,,,these days risk is stupid

[@younglightskin2685]

what a silly kitty

[@wernerklaus2904]

your doing everything so wrong, your cooler must be direct on the DIE for the best result !!!!!!!!

[@griffenxzable]

He did direct die, and showed best temp with it. So unsure what you are looking at?

[@modalityepstmlgy]

"All right, boys". What about the ladies?

[@taiiiz3969]

Ladies are part of the boys

[@Karl_Donnerlörres]

Dogs and cats too

[@arthurmelo3472]

You're goddamn right.

[@FrameChasers]

My stats say it’s 99.9% male audience tho 😅

[@Karl_Donnerlörres]

@ we need DEI ….. not

[@leon_094]

I wish this video was out 2 weeks ago 😄 I delid my 9800x3d and temps were -20°c with thermal grizzly amd mycro pro, but overclocking that cpu doesn’t gain a margin in games so keep your warranty on this CPU guys. So I can confirm that 😄

[@djsm1769]

Thanks

[@NoMisteR_RHF]

i cant understand why we bother with all these BS, for 99.99% ppl an AIO 360 gonna be more than enough.except if its a video for the 0,01% ....pfff

[@quanghoancu4154]

if you only play games then disable SMT and Core boost performance can greatly reduce cpu temp. 70-80 to 50-60 °C.

[@slackary8563]

If you were using thermal paste for the delided cpu tests then that’s your problem. Thermal paste struggles with that high of heat density so Liquid Metal or kryosheet are the only real options.

[@starlightHT]

It's because of these differences in CCDs that I will never buy a cpu with two CCDs. It's a shame and I don't give money for a product that smells like fraud. The two CCDs should have basically the same behavior and not one being good and one being shit. Shame AMD

[@patrickmartin4327]

Average intel shill

[@redpriest26]

Do you feel scammed by having E-cores that don't clock as high or have equivalent IPC?

[@gozutheDJ]

his CCD discrepancy is especially bad, my 5900x both CCDs perform pretty evenly

[@JoeLegionTV]

@@gozutheDJAll 7950x and 9950x CPUs have this same behavior and always have.

[@JoeLegionTV]

@@redpriest26That’s a completely different scenario 😂 Intel tells you that the e-cores are less performant, and power efficient (hence the term efficient cores)… AMD does not tell you that you get a shittier die on 50% of your $600-700 purchase.. Average AMD shill

[@mirzet1976]

Come on, do not lie that it takes 9950x 20 min to Windows, my 9950x under AMD Mycro Die needs 13sec, mem 8000mhz

[@toonnut1]

👍

[@Tech2C]

ptm7950 paste/sheet is the new kid on the block