How I Made Dr. Fate's Helmet | 3D Printed Cosplay Mask |

FATE HAS FINALLY ARRIVED!! After putting this build off for WAY too long I finally pulled the trigger on it! My biggest problem was that GOLD! But I did it!
In this video I'll be showing you not only how to 3D Print this awesome helmet, But how to get a beautiful GOLD paint job on cosplay helmets! This was definitely tricky to do but luckily I've already tested this gold paint before a long time ago in a far away land.
Many methods I show in the video can be applied to a variety of different projects so I hope you learn something new!
Enjoy!
▼ IN THIS VIDEO
Materials | amzn.to/3UeORvL
LED Eyes | tinyurl.com/4664ek7y
3D File | bit.ly/3wRl6GO
▼ SHOP MY CUSTOM BUILDS!
Etsy Shop | www.etsy.com/shop/FranklyBuilt
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for my favorite FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!

▼TIME STAMPS
0:00 - Intro
1:04 - The 3D Files
1:55 - How to Print
4:21 - Time Lapse Print
4:55 - Print Complete
5:36 - Support Removal ASMR
6:39 - Sanding
7:07 - Priming
7:35 - Slow and Smooth
9:25 - Gloss Black Base
10:08 - That Gold Tho
11:10 - GoldChrome Application
12:21 - Eyes, Padding & More
14:40 - Power On!
15:09 - Golden Eye....s
17:30 - ClearCoating Gold
19:30 - Outro!
Disclaimer- This video is NOT sponsored by any brands mentioned.
Honesty is very important to me and my channel- I do my best to remain unbiased and all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
#drfate #blackadam #dccomics

[@colorlesscrayon9428]

the gold eyes amazed me, I was so surprised when he turned the lights back on and it just dissapeared and then back off and it was just so reflective

[@williamhill1580]

Absolutely love the time lapse! Super clean! Love the videos! Your doing amazing!

[@MadShamanLodur]

I've used alclad aqua gloss over molotow chrome and montana gold chrome to great effect. If you give it 3 or so days to fully cure before clear coating and build it slow it works really nicely and keeps the mirror finish. Love the videos!

[@army310]

second this its what i use for mini painting

[@deeznuts23yearsago]

Theres many methods and it’s mostly what works best for whoever is building it For me Montana gold works best as I’m from the uk and don’t have room or money for an air compressor

[@alex.drinks.water.]

Love this, the quality of your vids continues to skyrocket frank! Keep up the good work!

[@thecyberhobbit]

Another great build Frank! Dr Fate was the best part of Black Adam.

[@legofreak4092]

I'm more of a fan of no gold tint on the eyes because of a preference for comic/film accuracy, BUT the gold tinted eyes still looks absolutely amazing. Good job on the build, love the work.

[@laminateBricks]

I think it would have looked better using black window tint

[@3Dprintingviking]

I've been waiting for this for soooooooo long! Thank you sooooo much so excited for this!!!

[@JonathanCase12345]

So glad I was able to give you the gold idea! Turned out amazing as always

[@illusionix252]

Thank you for the knowledge on gold chrome.. i really need it

[@ezekielwheeler1912]

That gold turned out incredible! Great job.

[@HypnicJerk1]

LOVED this build. Thanks for sharing

[@wallacereed9911]

I love this helmet so much and you did a fantastic job on it, keep at it 🎉

[@darthhyrum1639]

I personly love the gold and I really love how when the eyes are on they are a bit reflective.

[@CrushedParadise]

I love this style of video. Glad you decided to start making these!

[@CrushedParadise]

with the gold eyes, btw

[@masonman2851]

That is a awesome helmet, Doctor fate is one my favorite characters, and that helmet is insanely accurate, I love this

[@olivariousmillier5103]

I have been waiting for this video forever, thank you

[@mikemccabe2758]

Those gold eyes are great, thanks for another great video.

[@GregoryHaynes]

Another great build 👏! I think the gold tint looks the best 👌 👍!

[@mlubecke]

Turned out amazing…. The gold tinted eyes are perfect 👍

[@The_Meme_Almanac]

I have been waiting ages for you to make a video on this helmet! I have seen it in the background and it looks great

[@TMad_3D]

Wow!!! Just amazing, man!!

[@Canard3D]

My man Frank being one of the most awesome 3D printer here sharing what he knows and love is at it again... Making another awesome video.

[@charlesfowler3464]

Love the gold eyes

[@MostLikelyPeterParker]

Another BANGER of a video from good ole' Honestly Constructed!!

[@skyrider4789]

Nice job Frank. Go for the 100% with the clear. I know you can do it! 🙂🏁👏

[@anthonypoole4025]

Love your content Frank! Thanks to your videos I've been able to start a cosplay business from my house using rattle can paint 😎

[@livmor3442]

Goes without saying but amazing work. Keep it up. Big fan

[@amithrajpal8792]

Thank you for this. Not sure if you saw my comment to your question on IG but this is really what I was looking for. Thank you Thank you!!!

[@Blackbird9070]

That looks epic!

[@Jeffr3yButl3r]

Gold eyes are legendary

[@Ichiashi]

Awesome job man looks great.

[@christopherbaez7282]

This looks so good!💪🏼🔥, honestly Frank well done!👏🏽👏🏽💯 ...now i want Dr.Fate costume 😂. Kudos!

[@Itz_Collei]

It’s my birthday today and I love all your videos. I’m really happy you posted on my birthday even if it was just by chance, Thank you so much!!😊

[@Grimthrxx]

the gold tint on the eyes is such a nice touch to the helmet, my god.

[@kaylaambriana1101]

I love the gold eyes 🤩

[@camtron1967]

That helmet looks stunning

[@mysterynerd3591]

Ooh been waitin on this since the Instagram posts

[@jtyoung706]

That helmet turned out sick!

[@wisemoments9542]

It took me a minute to watch this, but I like the helmet with the shades on because it's like you're not at full power, it's more like you just walked in the room.

[@masonl87]

Those gold eyes are RAD AS HELL!!!

[@kulayolivete4942]

Soo good love your vids mask looks real 😊

[@ethancarpenter2999]

I've had this helmet printed for a year and have been waiting for someone to post something like this cause I couldn't find a solution for the gold that I liked this is so awesome

[@PrintedByJohn]

The helmet looks so great. I made my own Mando helmet and it looks so good.

[@tonygangi1624]

Fantastic look on this...the reflections you're getting off of it are stunning...think you could do a video on the creation of a painting/clean room?

[@gilbertrodriguez85]

Frank, Thank you for all of the awesome content. Your videos have helped me progress in prop making. Could you share the link for the LED eyes?

[@jetjoe9646]

Damn I want the big helmet! Lol nice video man

[@Rickysuave97]

Can i suggest using a 2k automotive clear over the gold. I think maybe it would look more true to the gold you wanted. Also it’s going to be pretty hard just like a car paint job. and you can even polish and ceramic coat it

[@titusdodd3588]

Love the eyes

[@logansellars8377]

When you’re doing the gold it’s called building sheen with multiple coats. Some paints build sheen at higher thickness

[@FranklyBuilt]

Thank you! Didn’t know that

[@TSOCrypto]

Have you tried pledge floor gloss? I know Barbatos Rex uses it over some chrome without issues. Or maybe Vallejo polyeurethane gloss varnish.

[@thething123789]

I absolutely love it show, and all the builds you make, have to done any of the Star wars helmets? Or Spawn's helmet? Would be awesome to see, keep up the amazing work!!!!

[@jasoncaballero7931]

The Helmet came out really nice. Use a calligraphy cap with the Montana can, you get a much better finish. Have you tried liquitex gloss varnish, through an airbrush. It doesn't harm the finish and you can rattle can clear on top of the Liquitex varnish.

[@jpage5303]

With the gold yes tbh or any color like green would be cool too.

[@cheezit6564]

This is sick

[@rossmaclean2]

Looks amazing! it would be great to get your opinion on using conductive spray paints and then electroplating helmets.

[@dragonking5638]

The gold eyes are awsome

[@Owen.3D]

How 11h ago?

[@Za_Ghost]

that is insane i Love it i wish i will be like you one day

[@Gamezonewt]

Would electroplating make it look better or more metallic?

[@ihatepeople2335]

Frank is a cool dude.

[@OmarAlAhmari]

Nice helmet! Try chrome window tint for the eyes I think it would look a bit better

[@Cosking999]

You are really inspiring me to do the damn thing bro! This Is The SHIZZNET

[@trippfreeman5978]

Frank this was an awesome build i would also love if you built a hulk buster armor because the hulk buster armor has been my absolute favorite since I was a kid and I would love to see it come to life

[@michaelgarcia5680]

“It is difficult for a lord of order or chaos to maintain a presence on the physical plane.” -Dr Fate/Nabu(aka bully, killjoy, and geezer)

[@sahttr_5097]

One of the Best characters of DC

[@E3TCREATIONS]

Hey Franky. Saw your Dr Fate TIKTOK and here I am.........a new subscriber.

[@gagemesser6715]

Day what feels like a 100,000000000 of asking Frankie Built to make doomguy's predator suit from Doom Eternal

[@camtron1967]

Praetor suit not predator

[@stanleydegraef4442]

I've been thinking to add goldleaf on some 3d prints, might look nice on dr fate.

[@mikeboyle6693]

Fabulous build. Do you have the LED eyes link? Couldn't see it in the info. Thanks, pick up so many tips each time.

[@jacksplicer0292]

Awesome

[@Dragonaut72]

one tip i remember hearing about 3d printing helmets is to print them upside down, that way it uses less filament on the supports

[@FranklyBuilt]

Not always true. Also makes post processing harder

[@seekertosecrets]

10:59 I want to invest in a clean room, but I don't have the room for it! AHHHHHHHHHHHHHHHHHHH! 15:58 Again with the window tint... And I thought I would have to step away from that idea. 16:57 I like it better with out the gold eyes.

[@Cosking999]

Bro I love you work, its coming in handy for my White dino thunder ranger stuff. However I must ask, where did you get the hellbat file from thought?

[@ThatVideoGuyTom]

This is completely awesome. If anything I really want a giant printer now. Will you link to the AliExpress eyes?

[@mrsfgogo09]

A good way to protect it without clearcoating it is ceramic spray wax

[@primus1873]

i like goooollllddd!

[@jean-sebastiend.2145]

Hi, just saw this video, thanks alot, for I am thinking of doing a Doctor FAte cosplay. I was thinking of using gold leaf for it. What would be your thoughts on that. The gold you used does look very nice, but I think gold leaf would really take the gold look to an other level. thanks JS

[@jacobsylvester970]

now you have to make the gold eyes on Starboost😂

[@bobbyg8474]

Definitely golden eyes

[@camtron1967]

Am I the only one that watches the videos all the way through even though I know how to do everything to make the project 😅

[@collind7215]

Just curious, have you tried sanding and polishing with an automotive grade polishing system (I know you mentioned polishing with the Iron Man helm on the clear coat)? Might be worth a shot to get rid of some orange peel in the gloss black base stage (I just don't know if the gold would stick at that point?). Helmet came out amazing though!!! What printer would you recommend between FLSun SR, Sovol SV03, Sovol SV06 (smaller need more prints but comes with an all metal hotend)? I want to use it to print useful stuff for around the house but also for getting into cosplay stuff like you do. Any advice would be appreciated!!! :) Thanks for everything you dooooo

[@gibbshouse]

Great video!! I want to add 3d printing to my hobby list. I'm looking at a Elegoo Neptune 3 plus or Elegoo Neptune 3 max. I want to build helmets like the Doctor Fate one. Can this be one shot printed on the Neptune 3 plus or should I "Future proof" with the Neptune 3 max?

[@Clay20208-Gaming]

Awesome ;)

[@DomadraghiCosplay]

Wow, that's amazing! Can I ask you what is the brand of the gloss black spray can in this video? Thank you!

[@FranklyBuilt]

Krylon

[@hoyabun]

great painting on Dr Fate helmet, with a spray paint I'm impressed, do you do the technique of heating the spray paint with hot water at 30-38°C a graffiti artist's trick, it's for a better grip

[@shadownf9006]

I love Dr. Fate

[@DavidLeeKersey]

There 2k Clear coats that come in a rattle can. The downside is they use a catalyzer so once the can is activated you only have about 48 hrs to use the whole can. So it can get pricey for small props.

[@Mobile_Dom]

i'd love to see you get ahold of some of Polymakers cosPLA that's made to be easier to sand

[@FranklyBuilt]

I have some. Honestly? Not really too different

[@Mobile_Dom]

@@FranklyBuilt really? well suddenly im less mad that this a US exclusive

[@DexAMDgame]

hey frank, are you doing more videos for the FLsun V400?

[@williamhill1580]

Gold eyes!

[@LivingLambeaux]

I used Montana paints for my Boba Fett helmet, and love it, but nothing Chrome like that. Makes me wonder if you can use for C3PO!!

[@mab4110]

A little foam padding will save the 105% fit I would think.

[@fin8967]

Bro turned into deathstroke in spraying the helmet 💀

[@jamworkshop]

You should try car rep 2k . Test it on Montana gold it’s spray can 2k it’s awesome

[@FranklyBuilt]

The gold iron man helmet that I show later in the video where the gold yellowed was 2k can actually. Didn’t work

[@tylerkister4628]

Would the sanding/priming technique work for any mask

[@gregoryhall2967]

So when it's time for the gold it's all done in one process as far as starting with a dusting and gradually work up to final wet costs? Not letting it dry in between?

[@camtron1967]

Frank do you still have the old Dr gate helmet that you have had in videos from a while ago

[@scotc.etling4666]

Do you have any instructions on the standins for your Iron Man Suits?

[@Azurko]

What do those eyes look like from the inside? They look like they'd be bright enough to blind you during prolonged usage.

[@jaredarneecher8724]

Hey frankly I’m having trouble with my ender 3 pros fans they aren’t running and I just replaced the thermistor so I think it’s the wiring

[@crixtionn]

Awesome helmet! How would I add a visor like the LED eyes in this for a larger visor? I'm making a Titanfall pilot helmet and the visor is a bit more complex and larger so LED eyes like the one shown in the video aren't an option. The ones in Titanfall are white and turn blue when powered on. How do you think I can implement that in my helmet?