Freddie Dobbs' Bonneville | How Can There Be More?

Join me in this video after taking on the challenge to fix @FreddieDobbs Triumph Bonneville T100SE. This motorcycle is the central focal point of his channel and has been right there with him on many adventures from all over Europe to the Sahara, across the Atlas Mountains to the local coffee shop!
Back on the rebuild and yet more parts to clean, in this video we get the intake spigots cleaned up and installed with new O rings and also give the throttle bodies a thorough clean. We also find another issue that was not helping the running of this engine!
Check out Freddie Dobbs' KZbin channel right here:
/ @freddiedobbs
ultimatetwinperformance.co.uk/
www.buymeacoffee.com/thewurks
#Bonneville #dobbs #triumphmotorcycles
................................
❱Setup So Far:
Helmet - Ruroc Atlas 2.0 (Raw Carbon)
GoPro Hero 8 Black - Bought Used
GoPro Case (Artman) - www.amazon.co.uk/gp/product/B...
GoPro Arms (HYCKee) - www.amazon.co.uk/gp/product/B...
▬▬▬▬
❱ LINKS:
Instagram - / the_wurks
Facebook - . The-W%C3%BCrks-...
Twitter - / twurks
ALM ELECTRICAL SUPPLIES: www.almsolutions.co.uk/index....
🎵 Music: www.epidemicsound.com/

[@devonbikefilms]

The standard of care and effort that’s going into this is a superb example to us all. I hope it’s fully appreciated when it’s returned.

[@volt8684]

I hope when holiday Fred gets his bike back he takes care of it. I cannot believe he got back from Morocco

[@rwalton159]

Some time back I suggested Freddie bought a new bike. I was wrong. The quality of workmanship and attention to detail by you is amazing. I'd love to ride the bike once it's done. 👍

[@TheWurks]

Aha thanks pal, I can't wait to get this running and see how it rides!

[@BUGBYTE_]

I'm glad you got Freddie's bike. I hope all this work is working out for you. I see why the other guys said just scrap the bike. This bike is going to be better than when it was new after you're done with it.

[@MorningNapalm]

Yeah, the other guy said scrap it because it wasn't economical to repair it, not because he couldn't. The Wurks to the rescue! You have to milk this for more subs! Get Freddie to do a video for you.

[@johnparsons4941]

Freddy freddy freddy what a lucky man you are getting Joe to get your bonny up and running I would be over the moon and feel very confident in joes work. look forward to her her running .

[@5tevieb954]

@@MorningNapalmhe’s done one or two already

[@weemsmotorco]

The Hill Climb sounds like a RAD time!

[@johnratcliffe4105]

I hope you do more vids once Freddies bike is complete. Even if they are your own.. Ill be lost without these to look forward to... Pure brilliance you two ...😉👍

[@TheWurks]

Thanks John, absolutely there will be plenty more all my projects are on hold for now ;P

[@therohugin8676]

You appear not to be doing a ‘repair’ of Freddie’s bike, but a rebuild that will be better than factory issue.

[@chrissteer9215]

This is my favourite channel on KZbin being a motorcycle mechanic in my younger days 👌

[@TheWurks]

Thanks Chris that is great to hear and thanks for taking the time to comment!

[@05gt99]

Great work Joe & Emily 👍

[@melfzs]

I've never been so interested in seeing the finished result and fire up of a rebuild as this one , and I've done a few of my own over the years ! There's immense satisfaction in saving a bike from scrap and resurrecting it , excellent work! 🙌👌 Cheers Mel 🍻

[@murrayhyde4902]

You should have 100000 subscribers... anyone who follows Freddie should be on board. Plus anyone who wants inspiration on bike maintenance and repairs. And any triumph owner... Keep it going, and good luck with your channel... Muz from oz. (Enfield owner)

[@benkelly2190]

Mate, this bike is going to be a proper one off, in its own right. You have done an outstanding job. 👍🏻

[@leemartin2978]

I can’t imagine there’s going to be a better example of this bike in the country, certainly of one that’s actually been used

[@Timjacks01]

Wow this is a real nuts and bolt restoration 😀

[@kdsowen2882]

Epic-work ! This isn't far-off a total-restoration...and the-Apprentice is coming-along wonderfully . Dave nz

[@antonoat]

When Freddie sees this bike completed it's going to be literally epic, he'll surely be brought to tears, hopefully Monika will be on hand to look after him! Lol. Great job so far guy and gal.

[@bobbluesbarker]

I think that the take-home from this weeks video is to never underestimate the importance of cleaning. Often, in the process of cleaning, you're looking more closely at things and can spot something that you'd otherwise miss, like the split in that intake rubber! Good spot, chap! 👍

[@TheWurks]

Certainly is!

[@sussexbikerpillion]

Wow the bike is going to be unrecognisable! Good job Joe.

[@PDCRed]

The hours Freddie used to spend telling everyone how reliable that bike was!

[@simoncaddick9085]

I really don't think that Motorcycle can be criticised, it's certainly held it's end up.

[@zanepickavance]

I have been following this series since the beginning and you've given me the confidence to work on my bike, I got a Haynes manual took my time, and have been doing my own servicing from replacing the fuel filter and carrying out a coolant change to changing the chain & sprockets, things I would have not done previously, quite enjoyed doing it, I've got to know my bike better and probably saved myself a small fortune by not taking it to triumph. next on the list of things to do is checking the valve clearances, big thanks Joe keep up the great work

[@haydenw6585]

Freddy is one lucky guy having someone meticulously go through and fix his bike ! Great work 🙌

[@petewarby7158]

I'm no mechanic, at all! But am really enjoying watching a true mechanic at work. I can't wait to see that moment where the machine is fired and tuned up. Brilliant, Brilliant rebuild series.

[@1240enzo]

Mate, you’re doing a cracking job on Freddie’s bike. Basically, by the time you complete it Freddie is going to have a new bike. He is going to owe you big time for all your work. 😁👍

[@Skappa-lr2jf]

When you factor in the time and parts how much would this cost Freddie without you, but what a fabulous job.

[@biker_dale]

Beginning the count down to start up day, it's a great video journey seeing a bike come back to life and watch a real engineer at work. Loving this channel, very inspiring.

[@gasman6163]

great work....... In the meantime I am spending 2 hours adjusting my chain and then rechecking it cos I'm not happy :-) lol. I need an Emily. Dobbsy is a lucky guy to have you sort his bike!

[@open_water2411]

Ultrasonic baths are amazing. Pop the part in and grab a cup of tea.

[@JohnSmith-xw5qe]

Excellent video Joe your doing a superb job on Freddie’s bike just hope he looks after it when he gets it back & definitely don’t take it thru any flooded roads again.👍🏻😎

[@user-lm4nn4ef7k]

thanks again dynamic duo. more good work. i'm just a little worried what will happen to it all when Mr Freddie gets it back again. Only kidding!!!

[@billrothwell7139]

Joe your attention to detail is second to none , love the channel 👍

[@raybrensike42]

Interesting video. Most of this work is the kind that many of us could do ourselves if we had the right manuel and tools.

[@IbrahimYounes]

This bike after return should be a display bike in a museum !

[@TheWurks]

Thanks pal… needs to be ridden though!

[@markmacpherson3999]

Freddie going to be getting a new bike 😮👏🥳

[@ralphrotten1639]

It's great to see someone taking the time to do a job right. What you're doing, a shop wouldn't do. If they did, you couldn't afford it.To bad Freddy doesn't get the joy of doing this stuff himself. Fixing the bike is half the fun of owning one!

[@simoncaddick9085]

There's a minimum standard of care any professional business should be able to easily achieve, as they should be in the best place to provide it (quickly and economically) and that's not so far off this (and with some owner input if able, this) -Seriously.

[@GaryCrisp-di2yw]

I'm really impressed with your Never Give Up attitude, Joe and Emily. Freddie's Bonneville is truly beginning to take shape now. Hopefully, soon, it will be a matter of reassembly rather than fault diagnosis. I'm so impressed with the way you've tackled this project and appreciate all those who have supported you with supplying parts and going the extra mile to help with all you do at The Wurks. You're all a great team. 🏍

[@peterhobbs7609]

Another great watch, keep em coming guys

[@onederment]

Gosh... I can't believe how you tooth picked clean that bike. You must be one in a billion.

[@thomasbell9026]

I love your channel, great camera work and explanations of what you’re doing. Can I commend you on how clean your workshop is, it’s spotless 😎

[@deanfryers1407]

Well done Joe and Emily, great work ethic and attention to detail, I hope freddie looks after it as all eyes will be on this bike, great video .

[@luddite6239]

My heart sank when I read the title! But nothing that can't be remedied thankfully. Looking at that oil cooler, the phrase "labour of love" springs to mind. You must have spent ages cleaning between and straightening those fins! Top job though and well worth it - looks like new after painting👍

[@PeachesB]

Absolutely love your channel mate. Could watch you restore bikes all day long. Gday from Australia. 👍🏼

[@TheWurks]

Thanks appreciate you taking the time the time to comment!

[@user-xm4ws9hm9j]

I really enjoy your videos and it is really good to see that you and Emily have the skills and determination to bring this bike back from its death sentence. You strike the right balance in how far you go to clean the bike up, in my opinion older bikes should show signs of wear and the adventures you have been on with it rather than pristine showroom types. Again great work on this project.

[@ThatBobGuy850]

Boy-oh-boy! This is turning into a full restoration! Joe, did you ever think it would be this big a project? God love you for seeing it through. Freddie is going to owe you a *huge* debt (I'm sure literally). And we, your viewers owe you a huge debt of gratitude for taking on this project and seeing it through to the end. I'm sure I speak for all of us in saying that we can't wait to see and hear it run. Question: Will it still say "Riumph" on the tank? I'm kind of hoping it does ;-)

[@mum-0217]

Nice to see the engine back in the frame and torqued up and those throttle bodies have also come up a treat. I have cleaned some twin carbs in the past with an old baking tin, Gunk and an old tooth brush. I have also cleaned some other parts with boiling water and a chemical solution with some good results. The bike looks alot better and as you say I am also looking forward to the start up. Thanks Joe and Emily.

[@markhinde6187]

Nice one Joe, I would like to think my bike was cared for the as much when it was in the garage for repairs, Great Post 🤞🤞🤞🤞

[@timewardan]

Great work on Freddy’s bike can’t wait to see your next build

[@alanssnackbardailyrelaxati8155]

Great job on the bike fella.

[@patrickmeylemans9627]

Lets hope Freddy will take care of all the work you are doing on his bike…

[@naughtyprimez]

get in! quality episode. still loving this series and im so chuffed for freddie, to have this work done to such a meticulous standard you really have gone above and beyond literally every little detail and im super impressed i cant wait to see his face light up when this bastard fires up. get on 💪 shout out to emily too

[@stevesanelli90]

Joe & Emily, another quality video of bikes & cake! Oh Freddie’s bike will never be the same again after he’s finished with it. What you’re achieving is quality, admiration, detailed & professional… & the great looking cakes! Keep going 🤙

[@TheWurks]

Thanks again Steve, great to see you back here too!

[@johnjones4621]

Joe my old man used to take me to Red Marley in the 60 it stopped for a while good its going again now I loved it as a kid 😊

[@robmance1611]

I cannot wait to see the end result and I hope Freddie manages to look after it and get it in for regular care and attention, lovely job fascinating as always!

[@simonchilli2088]

When it's done tell Freddie not to ride through floods!!

[@gerardcullen5131]

Great job Joe/Emily it is a major restoration you are doing on Freddies bike its going to look and sound fantastic

[@packrat61]

Mate you do some amazing work your attention to detail is fantastic Mr Dobbs better keep it clean and to the standed that he gets it back

[@noeldoran8884]

Great detail mate see you at the climb...

[@mikerobb8838]

Great job Freddy may think you have swapped his old un for a new bike cant wait for his response on the reveal

[@londonbiker]

Mmmmmmmm carrot cake looks nice 😋

[@cottenham]

Holiday Freddie is one lucky man.

[@iancharlesworth3654]

Yes its a pity he's not makinhg him join in with the RESTO, to learn a few things instead of FUCKING OFF ABROAD at every oppurtunity. 😭😭😭

[@Personyoureadabout]

@@iancharlesworth3654 Some people are pilots, some people are ground crew, get over it.

[@AdrianBryan-ps5lw]

Lets hope after you and your lasses great work reviving his wreck, he looks after the thing like he should of in the first place well done both of you cracking work!

[@TheGreatestBeyonder]

If Freddie was a gentleman he would definitely owe you (at the very least) a new parts washer! 😂👍🏻

[@laurielavender4944]

I like the safety shoes she wearing

[@GrooveTasticThang]

This started as a top end refurb, wow this is a total restoration. Your standards are so high.

[@stephensmith1118]

i still think the biggest problem on the Bonnie was the nut on the saddle.... lol only joking, i only hope Freddy learns how to look after the bike....

[@gsx1250fast]

Spot on Freddie is a great guy but lacks mechanical sympathy. 🥵

[@mbrunskill]

Another excellent video, so interesting, could I send you some rust converter for that oil filler cap though 🤣

[@russparker71]

I think it's one of those brass accessory ones mate, hence the funny colour.

[@volt8684]

Hi Jo and Emily, I can’t imagine how much this is costing. I had a beautiful yamaha bt1100 shaft drive gorgeous bike. However stood for any length of time lead to rough runner and slow running jet totally blocked. Off with the carbs not a nice job and jelly in the carbs. I changed the slow running jets for larger ones but to no avail. Then I noticed the snorkels( that’s what I call them) were cracking. Google replacements £400 and unavailable. Mine a 2005 decided had to go be someone else’s problem. Some 2nd hand carb assemblies but same age related problems. I so wish I was a skilled as you. I hate it when I attempt a job then suddenly feel scared or out my depth. Years ago I would not touch the brakes on my superbikes of the day then used to doing lots cars I got stuck in and do most my own work but this is rocket science tome. Respect tou Sir and for Emily supporting😅

[@mick98791]

How the heck do you remember where all the bits go? :)

[@TheWurks]

;) by constantly thinking about it, drives me crazy!

[@SiopaoSauc3]

Seeing all the trouble you're going through, i absolutely understand why the other commercial garage don't see it worth working on this bike.

[@simoncaddick9085]

The other side of that coin, is they could have been all over this.

[@Swedenbonnie]

Gosh so much love and care you put in Freddie’s bike Joe, I truly hope the Bonnie will ride many many miles after your hard work! Freddie you need to keep clean the bike man! 🧐

[@TheWurks]

I hope so too!

[@Jagshemasher]

It is looking very good - a parts washer and ultrasonic cleaner would make the cleaning a lot easier.

[@SuperSetsquare]

If I win the lottery I’ll send him all the bits he needs. I’ve really enjoyed his workmanship

[@TheWurks]

Definitely!

[@leeandjancruise]

This is more like a restoration, been there done that.

[@frankmarkovcijr5459]

You should have charged him for all the work that bike needed. I am curious how much the bill would be. At another shop the cost for the repairs would be enormous. I have had my Triumph Tr-6 with a hard tail and magneto for 40 years. In all that time I never did as much work to mine as what you had to do to a much newer bike. My British vintage motorcycles are reliable and dependable transportation. They are rebuidable forever ♾️. Parts availability is excellent.

[@journeyofjerry820]

🍻🍻🍻 shop beers

[@KillickGreenieRN]

Thanks Joe, enjoyed watching that. Good to see the guitars and amp in with the bikes, the perfect combo! I use a Yamaha Revstar for gigging, the one I bought is the exact same colour as my first bike which was a Fizzy FS1E. The bike didn't have P90s though! Looking forward to the next one. Cheers.

[@TheWurks]

Sounds great!

[@andrewf1326]

Always poetry in motion. You mentioned ultrasonic cleaners. Considering how many hours you are both putting in to cleaning, they are not expensive. Get Freddie to buy you one. The very least he could do 😂

[@Rob-lj1jl]

Was it the same guy who was the commentator of ALL old British docs?

[@sunrisejak2709]

The use of an ultrasonic cleaner could make things a bit easier to clean the troublesome "nooks and crannies". Saves time while you do something else.

[@michaelgillett5477]

Think I’d sooner work on a 6T triumph engine had a lot simpler and not so much hassle. I knew I didn’t like the modern day. This explains why Michael.

[@kealanmcateer9690]

I can see the big manufacturers snapping this guy up for their r&d sections, wonder it hasn't happened already, he can see problems even before they develop

[@310765]

Top grade workmanship, I am so looking forward to the reveal BTW I’d love a few stickers, where do I get some? 😁👍🏼

[@eddiemizen3703]

Nice video 📹 👍

[@TheWurks]

Thanks

[@roviwoteap2375]

If I were Freddie, I’d be keeping this bike in my lounge as a showpiece work of art, rather than ride it. He’d better take care of it if he decides to ride it again.

[@apacherider7110]

Allen Millyard has a torque wrench built into his arm.👍

[@robedmunds7163]

Full restoration really init.

[@TheWurks]

Something like that, I just cannot help myself!

[@stephencox1955]

As an early observation in the video, the apprentice is wearing inappropriate footwear 😂

[@FunWithAJ]

I hope when you give Freddie his bike back from you that you school him on how to keep the bike clean and tip top going forward. Clearly his wd40 everywhere method hasn't worked over the years.

[@johnmitchell9705]

If needed a little silicone lube on the rubber bits make them easier to assemble.

[@simoncaddick9085]

('Might even have been disassembly.)

[@simonbirt6121]

Do we think that this bike should be taken into protective custody? Or should we get Mr Dobbs to mend his ways?

[@stephensmith1118]

i think Monica should be the one to get the custody of the bike... Freddy can ride it so long as he also takes care of it too....

[@pete504]

Hey Joe. Could you try and convince Freddie to ditch that hideous seat that he had fitted and swap it for a nice bench seat.

[@Ijusthopeitsquick]

It's funny how I quite like cleaning bike parts but I hate cleaning my house.

[@ZZR1200ZX]

Sorry Allen Millyard Joe is the man now.

[@gdfggggg]

Is that broken rubber inlet tube the air leak you described in earlier vids? That would be a major problem.

[@simoncaddick9085]

..But then there's no secondary problems haunting the clean running now either.. (You know, the ones we chase around .. and around.. and around..).

[@davidmartin7589]

So how many of these problems are a result of the prior repairs as opposed to wear and tear?

[@vincesacca5025]

I was looking at a new Triumph T-120 near my home at a new Dealership here. It's a lovely bike. The radiator on it looks very small for this size motorcycle. I've heard the bikes run on the hot side...I would appreciate your feelings about it. I kind of feel they should have used it as an oil cooler instead. Your feedback will be well taken.

[@simoncaddick9085]

What year T-120 are you referring to?

[@vincesacca5025]

The 2024 model.@@simoncaddick9085

[@vincesacca5025]

The 2024 Triumph T-120. It seems to me an oil cooler would have been a better option and more longevity with less issues radiator, hoses corrosion from water and leaks... @@simoncaddick9085

[@jacosaw]

Hi ,what happened to episode where you extended your swinging arm? I going to extend my one and would like to watch it again.

[@FREE_PUREBLOOD333]

Let's hope the youtuber Fred starts to have all his bikes maintained properly by you.

[@TheWurks]

This has been discussed...

[@roddyb]

Unbelievable detail you have gone into on this one. He ought to auction it for charity after your £10k makeover

[@steveoswin6084]

Why don't you auction your bike for charity? ,smug virtue signalling at its finest!

[@Theorangeman.]

Why would he auction his bike ?

[@dannywhite132]

If there is a final episode foe this rebuild, can we get an quick breakdown of what you think happened to the bike? Ik you've gone through fixing lots but it's kinda hard for me to keep track of what was a major failure and what just needed a rebuild. I'm guessing the timing chain jumped and that caused the most of the damage?

[@geraldsilveira8369]

Looked like you were removing the paint from the carbs, they were so dirty.

[@alexgarvey-welch.748]

Question, what is the adjuster located on the left side of the bike , positioned just under the float chamber (if it had one). Thanks mate, keep up the great work.