FreeBeam - Free 3D Printed PC Gaming Case using MakerBeam Extrusions

Рет қаралды 20,256

Күн бұрын

Пікірлер: 101

@VascovanZeller 6 ай бұрын

What a world we live is where a) someone has the ability and tools to design a case that rivals professionally manufactured cases b) build or print this case at home c) film the entire process in high detail and d) chose to put the entire thing online - FOR FREE!!

@standupg4m3r 6 ай бұрын

What a world we live in where a) people can appreciate the hard work and passion of strangers b) feet exist c) my OF equipment can double as educational entertainment d) did I already mention feet? But seriously, thanks for the appreciation. It means a lot.🥹

@varuns8788 6 ай бұрын

@@standupg4m3r This is a truly great attitude and work man . Appreciate your effort .

@Winter_rifle 15 күн бұрын

A man of the people man, what a guy

@alexnostalgix 6 ай бұрын

I love the dead pan comedy of the build lol. Overall great case might look into this when I downsize my package

@standupg4m3r 6 ай бұрын

Before you make any decisions, care to share what you packing?

@BlackDragonBE 14 күн бұрын

2:02 Instructions also worked with the GF, thanks for the tip!

@standupg4m3r 14 күн бұрын

@@BlackDragonBE It always just starts with one tip. Thanks for watching!

@ExtrudedMind Ай бұрын

Love your contents. Generously putting out great stuff for all of us! hoping you and your fam all the best! Happy Holidays!!

@standupg4m3r Ай бұрын

Much appreciated and thanks so much for checking out my videos! I’ve been live streaming more, but would like to ask - do you prefer videos over the live streams?

@ExtrudedMind Ай бұрын

@@standupg4m3r I really don't have any preference. I watch your live streams when I could. I enjoy your crafts and I think that's all that matters.

@standupg4m3r Ай бұрын

Thanks!!!

@xlr555usa 5 ай бұрын

I've been wanting to do stuff like this. I really like the Mesh all around the case, it should breathe well. I have traditional vertical cases that I end up leaving open and placing a fan on them, especially during summer. Your penetration skills are exceptional in this video - rock on Homez.

@standupg4m3r 5 ай бұрын

Thanks! Stay tuned for future additions to this on cooling. ;) PS - I think I was put on this planet to penetrate PC cases. #SelfActualization

@vipast6262 5 ай бұрын

I'm enjoying your new style of commentary on this video.. laughed quite a bit.. your cases are pretty nice.. keep trying to boost you up, so I can get that steam machine case.

@standupg4m3r 5 ай бұрын

@@vipast6262 lol thanks!

@teabagNBG 2 ай бұрын

VERY NICE! im planning something similar the last 2 years.... got me a bambulab last xmas... already sold it 2 month ago to get the new one when it comes out... a case will be my first project... makerbeams are also perfect for this

@standupg4m3r 2 ай бұрын

Thanks!

@GCS88 2 ай бұрын

Watched for the project, stayed for the innuendos.

@standupg4m3r 2 ай бұрын

🥹

@squnxfisher9831 6 ай бұрын

this is very similar how I envisioned my own makerbeam case. I really like your version!

@standupg4m3r 6 ай бұрын

Was yours a rectangle too?! lol jk, and thanks for watching!

@squnxfisher9831 6 ай бұрын

now that you say it... yes it was lol

@johnbernarddeleon5139 2 ай бұрын

That’s soo sick damn! So freaking cool!

@standupg4m3r 2 ай бұрын

Thanks!

@arkapadma 6 ай бұрын

First time see your video, I'm already subscribing. Thank you for this amazing solution for me who wanted to make my own case and share the 3D files for free, really helpful. I don't trust 3D printed plastic durability, using aluminium + petg make me wanted to try this.

@standupg4m3r 6 ай бұрын

Glad it was helpful! Please share your completed build when you do!

@johncarlovelasquez444 20 күн бұрын

Earned a sub and a like for sure. And I dont even have a 3d printer! ..yet

@standupg4m3r 20 күн бұрын

@@johncarlovelasquez444 thanks so much! What printer are you going to get?

@YuriiAverkov 6 ай бұрын

Very intresting project! Good job 👍

@standupg4m3r 6 ай бұрын

Thanks so much for watching!

@bett0diaz 6 ай бұрын

Awesome video and pc case. Thanks!!!

@standupg4m3r 6 ай бұрын

Thanks for checking it out!

@bwloawesome 25 күн бұрын

Fantastic work. If you have a larger printer, can this be modded to accommodate the width of a 3 slot GPU?

@standupg4m3r 25 күн бұрын

Thanks! There answer is usually yes, but I don’t have a three slot GPU so I have no intention of changing it until I do.

@bwloawesome 3 күн бұрын

@@standupg4m3r I wasn't asking if YOU could change it, just wondering if a user would be able to make the changes themselves to accommodate the more popular larger cards

@standupg4m3r 3 күн бұрын

@ Again, the answer is usually yes. I made a point about ME having no intention of changing, because the License I set for me Free STL's includes "No Derivatives".

@MrSnakefd99cb 6 ай бұрын

Nice work

@standupg4m3r 6 ай бұрын

Thanks for the visit!

@_notme_- 6 ай бұрын

A bit to many jokes/innuendos in my opinion but I love the case. I was looking at the beamcase but this being free is amazing. I think many people would prefer the video to be a little shorter without as many jokes. Still gave it a like anyway :)

@standupg4m3r 6 ай бұрын

@@_notme_- I’m glad you liked the case!

@XxalightnerxX 4 ай бұрын

I feel like the majority of them were unavoidable tho lol

@axledot 3 күн бұрын

nice case. do you think temperatures would be better if the front panel had more airflow or nah?

@standupg4m3r 3 күн бұрын

@@axledot Thanks! With the PSU covering a large area of the front panel anyway, it would just block the vents; and with the way this particular GPU takes-in, and sheds air, it might be negligible. But that’s not to see it might benefit other cards that spit air out along the same plane as the PCB and I the front.

@ilokiwi Ай бұрын

OOh I saw the with a radiator :O I was gonna ask if there was a watercooled version of this. I guess you could use a rad/pump/res combo, but for us already with a water res, is there any room for expantion so that a reservoir can fit above the gpu / cpu blocks (as in above so that gravity isnt a problem, not directly a bove)

@standupg4m3r Ай бұрын

That’s really going to depend on your GPU and how long the PCB is. For spaces this tight and a long PCB GPU, combo units might be the play. Check out ModUltra and Barrow offerings. But we are also jumping a head of our selves, since there are at least two cases in flight as a type this…

@lordshitpost31 6 ай бұрын

Thanks for the turn on instructions, it will become handy one day, hopefully

@standupg4m3r 6 ай бұрын

Practice makes perfect! It’s what my step-mom always tells me.

@jjb3931 Күн бұрын

I like your model, but in my country it is very difficult to get a makerbeam with the size 300x100x100mm, is it possible to use a makerbeam 300x150x150?

@standupg4m3r Күн бұрын

If Makerbeam or someone sends me Makerbeam XL parts, sure. But for now, I don’t have any so I won’t be designing for them.

@Shoo8601 6 ай бұрын

Thank you for your hard work! This is a well designed case. Could you please add the dimensions and the clearances? At first sight looked a huge case, but after seeing the the whole video I expect the size is around 6 liter, like the Velka 7. If that is true, that could be the 2nd smallest case which accomodate a decent sized GPU and an sfx psu. I like your diy magnetized screwdriver, that could be also mentioned as a big help to keep those hard to reach screws in place. Also the 180x180 print volume means that a KP3s also can print those files.

@standupg4m3r 6 ай бұрын

@@Shoo8601 it’s over 7 liters, unfortunately, with the panels installed. Thanks so much for the appreciation!

@Shoo8601 6 ай бұрын

@@standupg4m3r jeah, just made a rough calculation. It is 7.7 liters which is also very good!

@zenmaster24 6 ай бұрын

that turn on procedure tho 👀

@standupg4m3r 6 ай бұрын

“Honey, are you sure you know what you’re doing down there?” “Don’t worry babe, I’ve printed out SUG cases before.”

@Winter_rifle 15 күн бұрын

This guys word choices have my ribs hurting laughing 😂 funny bastard

@standupg4m3r 15 күн бұрын

Thanks for watching! When my ribs are hurting, I usually get a massage at the nearest truck stop.

@Winter_rifle 15 күн бұрын

@@standupg4m3r 😂😂 ill go check my local truck stops hourly rate for massage

@Winter_rifle 15 күн бұрын

@@standupg4m3r i was looking for that extrusion beam PC case, that thing looks sick, do you have a tutorial on how to make one myself? also i will go check the hourly rates for massage at my local truck stop

@standupg4m3r 15 күн бұрын

You’re commenting on a video about a 3D Printed case using extrusions… did the truck stop masseuse send you to another dimension?

@Winter_rifle 15 күн бұрын

@ I was fried beyond human comprehension, I don’t even know dude 😭

@dlewis9760 3 күн бұрын

Should have played some Barry White music when turning the PC on.

@standupg4m3r 3 күн бұрын

@@dlewis9760 [tips fedora in your direction] “I see I’m in the company of a gentleman.”

@SaperPl1 6 ай бұрын

Cool design, but I feel like it'd be better if it the panels were made to be put together in some way. They are thick so maybe even some inner surface holding them together with screws could make sense. It's just weird for me to have it split like that and also that connection line is visible. With that said, it's really cool that it's not all that much amount of things to print thanks to those beams.

@standupg4m3r 6 ай бұрын

@@SaperPl1 The visible split is a necessary evil to accommodate for smaller printers; unless they are filled and painted like the Steam Machine build (I hate painting and sanding though). I could easily glue/weld it as one piece though. Debated doing it actually - would save on hardware (magnets, T nuts, and screws).

@alecc.5610 6 ай бұрын

Looks cool! However, I would be concerned about tabs snapping off at the layer lines, particularly the PSU mounting tabs. I printed a similar case by the name BeamCase (costs $15) which uses a single part, spanning across two of the makerbeams. Prints flat, no tabs, just holes thru the part.

@standupg4m3r 6 ай бұрын

Thanks for watching!

@WMulanBTN 6 ай бұрын

please make a compact matx case that fit full size atx psu

@standupg4m3r 6 ай бұрын

It's already on the list. When I get to it, depends on how the Patreon members vote. They help decide what's next.

@darknessblades 6 ай бұрын

If you designed the 3d printable files in cad. maybe share the files so people can modify it to fit larger GPU's For example I would love to make this to have support for a "Powercolor Red devil RX7900XT" which is a behemoth of a card that might not fit in the default layout

@standupg4m3r 6 ай бұрын

Thanks for watching! If you have requests, just keep commenting. I record them all.

@darknessblades 6 ай бұрын

@@standupg4m3r One would be a Extension plate that sits between the side-panels. that are 1-6 hexagon wide. this way the length is adjustable. Which would help with longer GPU's

@standupg4m3r 6 ай бұрын

@@darknessblades I'll jot it down, but I don't know when I will get to it. Patreon members have voting rights to what's next. But keep your eyes peeled!

@slitroy6988 4 ай бұрын

Please, could you tell me the dimensions of the case and its approximate weight?

@standupg4m3r 4 ай бұрын

@@slitroy6988 print it out and see for yourself? 😜

@southerndime333 6 ай бұрын

maan this video is FULL of inuendos... 24h edging.. jus sug it.. penetration... target audience or wot.

@standupg4m3r 6 ай бұрын

Just because I game on PC, doesn't mean I'm PC. lol but seriously, thanks for watching!

@southerndime333 6 ай бұрын

@@standupg4m3r brilliant retort PC guy..

@Kmarau 23 күн бұрын

can we added 2 fan in botom and top ??

@standupg4m3r 23 күн бұрын

The answer is yes, but when I will get around to actually doing it, is a different question lol

@Winter_rifle Минут бұрын

Now that I think about it, you could lowkey make a ff04 duplicate with this as a frame

@bartman2395 6 ай бұрын

I love your designs but they are not for hardcore gamers. Can you do maxed sff case? (3x280radiator, but better 3x420 for example? custom loopable ofc). Something like meshroom S but with mobo io at the bottom, so u can install another 280 rad at the back/left side (left, back, right radiators). I will be doing it anyway, but firstneed to know 5090 pcb size:)

@standupg4m3r 6 ай бұрын

Thanks! TIL most (if not all) esports/streamers aren't "hardcore gamers" lol Send me a link when you finish your radiator goals while keeping it under 20L!

@bartman2395 6 ай бұрын

@@standupg4m3r what I've meant is that ur printables doesnt fit 4090 i9 and proper watercooling with it to be silent, because are too small:) What i've meant by hardcore gamers, is a person having strongest gaming pc possible:)

@standupg4m3r 6 ай бұрын

Thanks for admitting you don’t watch my other videos. 😞 /s A Full Size ATX Gaming PC Anyone Can 3D Print kzbin.info/www/bejne/fqjbZ2Wirt1nmtk 240mm+360mm probably isn’t hardcore enough I assume lol