Setting up a Molle DUTY BELT and VEST for Police Work

[@oldcop18]

I retired in ‘97 after 30 years and we did not have all this stuff to carry around. Tasers were a few years off so I had my pistol, two extra mags, cuffs and a radio. Vests were worn under the uniform shirt and the load was no where near as heavy as what’s carried today. Stay safe brothers & sisters.

[@nnamdi554]

They still wear vests under their uniform

[@AlRib]

@@nnamdi554 some places

[@navnavtala]

Yeah I agree

[@navnavtala]

I would like to listen to your memoirs, how can i contact you?

[@thisiconisactuallygoofysfa9960]

@@navnavtala bruh why? Like why so formal and unexpectedly saying that?

[@mustangkrillin]

Quick tip to setting up anything molle; put everything on with just the top row, try it on, make sure it works, then weave. Trust me the hours of frustration from having to redo because one pouch messed up setting up another pouch or you end up not liking the placement or whatever more than outweigh the 10 minutes it takes to do a test run.

[@SharpShooter9867]

+1

[@winstonsmiths2449]

Yes! I learned this after attaching my first piece with a complete weave only to have to undo it to move it over one section.

[@collinponds5139]

Collin F$#@q23490876543212122e4-$$#f$ddd$

[@orionjaziel7342]

You prolly dont give a shit but does any of you know a way to get back into an instagram account..? I stupidly lost my login password. I would appreciate any assistance you can give me

[@nikolasjeffery3225]

@Orion Jaziel instablaster :)

[@gizmonine]

A little tip for adding pouches that have "slide-through" loops. The safelife belt, like many modern duty belts, is an inner/outer system with a hook-and-loop attachment between the two. When sliding the outer belt though the pouch loop you will want to have something between the 'hook' surface of the outer belt and the pouch loop you are trying to slide it though. If you buy a pouch from Safariland or Bianchi they come with a little plastic shim holding the pouch onto the display. Just stuff it between the two surfaces with the 'tabs' in the direction you are sliding the pouch. If you don't have one of those shims, you can just use a folded piece of paper and it will have the same effect. Makes the process much easier and prevents the pouch loops from getting all 'fuzzy' from the 'hooks' pulling on the material.

[@DirtyK1911]

I have used shipping tape on the belt

[@johnthong9511]

Tip in getting through molle webbing without butter knife, as for belt, reverse the belt and bend, so the molle will open itself, same as vest, remove plate, bend and go in

[@freefieldtraining]

I like it!

[@SR-km3gh]

After looking through various deceiving descriptions, YOU are the only one to actually illustrate the entire set up from ASSEMBLING THE BELT to how to put on the equipment. I never used this type of set up before, I used Sam Browne but now I am plain clothes. Thanks and well done!

[@jamiea2404]

Hey check out this molle duty belt. Proceeds to put on a bunch of non molle items on the belt and the one molle item that is put on the belt, almost no cop puts on their duty belt.

[@georgiohenderson5998]

My department doesn't use molle unless you're SWAT, too tactical looking, not friendly enough i guess. Soon we'll have to have cross draw duty weapons and fuzzy handcuffs so criminals don't get upset

[@joshwales1363]

Georgio Henderson dude I deal with the same shit at my department. They rather us have back problems that to attach our stuff to a Molle vest. I’ve said it over and over again, if a police officer is comfortable in their uniform, they will be more proactive.

[@georgiohenderson5998]

@@joshwales1363 they do make straps you attach to your belt and go over your shoulders, helps take the load off your hips. You need an outer vest to hide the straps though.

[@joshwales1363]

Georgio Henderson yeah I’ve seen those before, so far my solution has been a lot of stretching and minimize the amount of gear that should stay on my belt. Keep it simple and prioritize what should stay on.

[@Lhswrestler44]

You’re cops, not soldiers. Fuck off. If the people actually got our way you wouldn’t have anything but a baton.

[@em34ev3r]

@@joshwales1363 The back problems comes from sitting in the patrol vehicle with the duty belt on. The Molleys on the outer vest is just as bad, because most of us load all of our gear on the front side including multiple mags, taser, molleys, cuffs, etc etc causing imbalance of weight on the front. There is really no way around the back problems with the all the gear we carry, regardless of the vest or not. Also, youre right...80 percent of departments will never switch to outer vest. Many are still traditional, and the other reason is that it looks too menacing

[@DEFIANCE_24]

I have searched and searched as a daunting task to find experienced people doing no bull shit videos that are actually tutorial and explains tools and gadgets and gear. Finally!!! Thank you for that. Gonna binge watch a few videos now, hopefully all equally as good as this one.

[@nickatnyte1019]

Thanks for the tutorial on how to link molle

[@anitamcgriff974]

Bless all who work law enforcement

[@lockedon8953]

and curse the ones that hate them because they believe everything the media tells them....poor fools

[@danm.9045]

Locked Firing lol

[@danm.9045]

Lol

[@anitamcgriff974]

I said that because l have officers in my family but if it didn't have officers in my family i still would feel the same way if I didn't have officers in my family since I was a child I been watching TV shows with cops 8 always been fascinated with law enforcement 🚔

[@sercrisal]

hi there, i´m police officer from valencia in spain...great job with this video...well done man....see you in the next.

[@armandol1826]

SERCRISAL I love Valencia man. I went to Las Fallas this year. Valencia is way better than Barcelona.

[@jesterflight8593]

I had a radio belt pouch like that for about 6 months in 1983, when it was issued after the academy, after that it was a square black metal that was purchased at a police supply in Austin, Texas. Ive never used the word “Molly” except to mention the first girl that popped my cherry, and “Cobra” only to mention the Ford Mustang Cobra, that always out ran our Po-lice cars. We were issued a Bianche River belt rough duty for daily use, and a traditional Bianche Sam Browne for “Dress Use”, 8 keepers, 4 for each belt all with BRASS buttons and all the cases from handcuffs to OC spray to every accessory case must have a BRASS button to close pouches & keepers & every buckle including pistol threat level 3 Bianche, and new duty belts purchased must have brass, and has to be polished with BRASSO and an old sock, before inspection at “ traditional MUSTER” shift by watch Commander & shift Sergeants. I only purchased 1 other River Belt, through the same uniform company that mailed our stuff when I first began in 1983, but when I first started my waist was a 32” and now at 55 my waist is 34” since I was 48 years old, and had to have a saddle maker punch out 2 other holes in my leather rough duty, and the Dress Sam Browne only had to have the square buckle moved forward to accommodate my 34” waist as I got older. I never moved up to first line Supervisor/Sergeant, but stayed as Senior Corporal, which isn’t any kind of Supervision position. On 11/18/2019 I now have 36 years still in Patrol Division, never worked “undercover” or in any tactical, etc except traffic Division for 2 years, other than that I still work assigned shifts 1 man marked patrol unit. I always liked the Chevy Police Patrol sedans and second to Chevy was the Ford LTD 2 sedan Police Pkg when I first started because it had a hopped up Police package and a 460 CID Engine, no sports car could out do us in pursuits, and since our Metro Department is in the middle of the state of Texas, even when I started in 1983, the car issued was a 1979 LTD II 4 door sedan Police Interceptor the LTD CROWN VICTORIA was different and much heavier than the LTD II Patrol Sedan. Every single Patrol car had complete “BRUSH GUARDS” that covered entire grill & lights & looked exactly like the Ford pickup truck Brush-guards except didn’t have the bottom PIT Bars that are prevalent now in Police Car grill guards, simply because the PIT maneuver didn’t come around until the 90’s & CHP sent Driver Instructors from the CHP academy to teach Texas driving instructors & taught through out the states, so we could have a tool in stopping vehicles attempting to abscond during Police chases. We were wrecking while shooting at tires & forcibly wrecking into violators vehicles. But thank you young man, for sharing your Department’s methodologies, but I’m glad our department doesn’t allow beards, ear rings, any rings , or anything that doesn’t look professional on a Traditional Police Officer, except military regulated mustaches, no sideburns.

[@BlkRS5]

Can you post pics of the belt being worn with a PD uniform and carrier. I'd like to see the entire setup worn and the flexibility it offers.

[@freefieldtraining]

Let me see what I can do.

[@pbplyr]

The whole point of the molle vest cover is to take most everything off you belt to save your back.

[@jeebugorn]

and yet the military guys are adding war (duty) belts to their kit to take things off their plate carrier to put on the belt to take the weight off their shoulders

[@jonnsmith556]

Also Incase something happens where you have to drop your plates in water you'll sink or another reason u have to lose your plate carrier you still have ammo, med ect. Military loves redundancy

[@reggie8724]

Maybe it's been asked, but I just started corrections and am in love with those cuff holders. Where can I find those??

[@bluegenes5888]

Did you find out?

[@jw9517]

Ethos Survival, I believe. I’m getting the double cuff pouch soon, make sure you get the right ones for your cuffs tho

[@dhulgan90]

He said the clip was common on black hawk products so try them

[@kevingalvach5268]

I want those same cuff cases some please let me know where to find those

[@reggie8724]

I went with a company called Strategic Dark and their RDS system with the MOLLE attachment option. 4-5 months in, and I love the setup so far.

[@camoflawless52]

Im planning on becoming a cop. I'm in school now for it! Two more years! Your videos are teaching me a lot. Keep it up!

[@tgpugsley8658]

I hope you do well! I am trying to become a cop too, but am in the process of losing some weight for the academy. Never quit.

[@camoflawless52]

@@tgpugsley8658 Hell yteah man! I'm trying to GAIN weight for academy haha! Best of Luck!!

[@peachteagirl]

Hope it's going well nowadays!

[@HM-dc7vh]

How goes it

[@camoflawless52]

@@HM-dc7vh not good, got into legal trouble and completely ruined all chances, fml man... forgot i even posted this... jeesh.

[@DarkFire515]

Most. Awesome. Coffee. Cup. Ever!

[@joshcanon8689]

utapau if you tell me that number 12 on my phone. She's coming back this Justin ain't country I'll ask you some questions about can I come by and tell him bye bye thanks if I'm not tired back

[@natecrosman9506]

My daughter made my wife one like that, it was the first thing I noticed in this video. So awesome.

[@Gmoney818]

Have you considered showing him the new RDS holster from Safariland? It's a new duty holster that protects the RMR while it's in the holster so it's ready to go and doesn't get dirty while doing day to day.

[@josephsingleton7174]

In Britain you have armed response and counter terrorist only they carry guns In the UK

[@Gmoney818]

joseph singleton What?

[@EanBezemer]

Who makes those cuff carriers?

[@YourHellishEntertainment]

Where did he get those slick handcuff cases? I have been looking all over but can’t find them

[@Andrew-wj2mc]

What is the guys plan with having the dump pouch? Not knocking it, just wondering what the thought process is.

[@Dieter_Adam_Hooligan]

I use one, but more as storage...When i frisk/search sb. so, nothing lays on the ground or gets lost.

[@AverageGixxer]

The one I have is big enough to fit a gallon in, works great for holding everything from empty mags and keeping items off a suspect to literally holding a gallon of water

[@Monster11B]

Evidence collection and such

[@Andrew-wj2mc]

Ok thanks. Do you guys have a rollable one like his or is it just a regular pouch that hangs out?

[@Monster11B]

@@Andrew-wj2mc I had a rollable one in the army... I don't use one as a LEO

[@darthvader4867]

Everyone sets their gear up differently. There’s this cop from Las Vegas PD that created the Hendi Duty Gear method. He did a lot of research and worked on the method for years. That’s how I set my gear up. You guys might want to think about looking at it.

[@freefieldtraining]

His system doesn't take into account the ability to put things on a vest that is now available and proven by science to reduce back injuries. It's great in most respects if you are restricted to just a duty belt and are a fairly skinny guy.

[@chemdog73]

Where can I get the radio case?

[@sleazykilla360]

Do you not know what google is or how to use it?

[@coolman54061]

i took a shot every time he says molle and I'm only 10 minute in and i cant see straight

[@gjhoward]

🤣🤣🤣

[@andy2373]

7:49 "sometimes molly is a little tight" lmao

[@DirtyK1911]

Loosens up with use 😉

[@quagmire5783]

Add lube and it’ll get in there 😉

[@TracerBullet100]

I ended up ordering the SafeLife Uniform Shirt molle carrier. It was a decent product but the issues I ran into were my Point Blank ballistic panels did not fit in the Safelife carrier. The chest pockets were kind of small. Not enough storage for everything I carry in them: cards, earpiece, mic clip, pens, etc. And major thing was there wasn't any sort of pocket on the inside of the carrier for a 5x8 trauma or rifle plate. Any thoughts on that? Asking as a reviewer, not a rep>

[@camgilbert9073]

Hey man I know it’s a year later. You probably already found this out but point blank cuts their armor different than everyone else. It almost makes it proprietary to their carriers. I also bought a safe life carrier. Lots of molle rows, but not having pockets killed it for me. My point blank also has chest pockets and those are shallow too

[@freefieldtraining]

*Use code "FFT10" for 10% off all safe life defense body armor, duty belts, and other products.* *Use code "FFT15" for 15% off all products at allegiance holsters*

[@samuelsnyder5260]

The handcuff cases I really like with that clip system. Where did u find those?

[@SharpShooter9867]

One suggestion I have is to actually reverse the direction the belt goes through the cobra buckle. This will result in the extra belt on the inside and once tucked into the elastic keeper, will result in a much cleaner, kept, and professional look.

[@reynoldmondestin604]

Strongly agree. I have the classic duty belt and i was able to trim off the access length.

[@billsmeltzer6713]

I’m seeing the handcuffs cSe is from eclipse. When you look they only show a 1.75” attachment but the belt is 2” wide. How does that work?

[@timoanez4668]

Well l bought the Safe Life Defense vest last year and l'm happy, now l'm going to retire my nylon duty belt that l was issued in 2000 and buying a Safe Life Defense duty belt for patrol. Well the wife is a little upset, but l need new gear. Good videos.

[@roymorris03]

What company makes the cuff holder thanks. Great video sir.

[@michaelegotti6439]

Roy Morris safari-land I think

[@georgiohenderson5998]

Safariland and Boston leather are the top two for belt accessories in my opinion. Except tasers, i use blackhawk for my x26p.

[@lawncare6294]

He's asking what brand those specific cuff holders were in the video.

[@paulcroft2856]

Not safariland. They are eclipse holsters kydex cuffcase

[@reynoldmondestin604]

Eclipseholsters.com for the kydex handcuffs holsters

[@j2o3sh]

Not a fan of the molle belt. Where I live for winter you gotta adjust your belt out to loosen it up when wearing layered clothes. Having everything too locked down on your belt would suck because everything would be out of place from loosening it up and taking the stuff all apart vs just sliding it around because if you have the Velcro marry system it stays in place anyways especially with keepers . Molle for the vests are a great thing but the belt not so much. Too bad it’s only been the last few years that services where I live allow molle vests and to attach gear. It’s great for weight displacement to save your back and body from strain from wearing too much in one place via a bunch of shit around your waist.

[@douglasspende6685]

I enjoy using my condor tatical elite belt. I like the Cobra buckle. I have to use a Basket weave Bianchi belt and pouches on patrol only.

[@TheCivilWarriorProj]

Blazing sadles. I saw a SWAT/CERT pin on the old vest. time to switch to the patch version. Good video for those that are new to MOLLE/PALS and outter vests.

[@Shinkajo]

The butter knife is a great tool. Should probably have it on the belt.

[@trackstarr711]

What was his old vest? The one at the beginning of the video?

[@paulriese1014]

Did you mil the slide out for the RMR?

[@FireheartSamurai]

Judging from the video that pistol is the Sig Sauer P320. The P320 slides come with the mounting plates for optics like the RMR.

[@ChadHuey79]

Good video! Keep it up. I just got a molli vest carrier and I'm gonna start experimenting with how I want it set up. My radio and my taser are the 2 biggest points of friction on my gear set up now. They are on my belt, it feels like a long reach across my body for taser, which I hate, and my radio gets snagged on my seatbel everytime i get out of my squad. I hate that, especially when I'm trying to get out fast or get out quietly. Gets in the way of my flow everytime. Needs to be fixed. Thanks again!

[@LC-yr2bd]

I have an outer carrier and live in the south where it rains quite a bit leaving my vest soaked. Have you ever tried to waterproof one before? I was thinking about trying Scothgard.

[@calebupton4023]

I love my safelife TUC IIIa+ it is great.. helped my back so much pain has stopped for the most part and getting all that equipment off my hips has helped my sciatica too.

[@JLoveCNA18]

where can you get a radio like the one in the video

[@714Joker1]

I am most excited about the external plate carrier. Although I recently lost my streamlight stinger

[@grry8]

Also for the hand cuff pouches where can I purchase those. I have the safelife defense belt and I like the setup you did.

[@carloshidalgo917]

Do you have the link to the handcuff holders? And how secure are they? I figure during a scuffle they may fall out? Have you tried them?

[@paulcroft2856]

Eclipse holster kydex cuff case

[@coltbenbow5830]

Damn this is going way different then when I setup my buddy with a molly!!!

[@RoninTX3377]

I use the G-Code RTI MOLLE adapter for my vest mounted Taser. I find the mount takes up far less space and allows you to remove the Taser holster if needed. The Blackhawk mount takes up far too much room and is not nearly as versatile.

[@brendonmilligan4520]

I recently moved up from unarmed to armed security, and my company requires me to carry a taser in addition to my weapon, my question is, should my mag pouches go infront of the taser or behind? I'm right ha ded so my weapon is on my right, the taser on my left for crossdraw

[@michaelhart8539]

That Blackhawk Molle attachment for the Serpa taser holster really takes up a lot of pals webbing. There are much better options out there today. I run the “Zero 9” taser holster on both my duty vest and SWAT kit. Takes up minimal space and is a well thought out holster.

[@Timothy-NH]

The unicorn mug! LOL Interesting choice of mag pouches and the height he carries his gun at, is he a competitive shooter? What does a LEO use a dump pouch for?

[@freefieldtraining]

The dump pouch is mostly for training. Guys like to be able to stash mags in one. I had one on swat, it was pretty useful on scenes to be able to stash shit on yourself you needed at the last minute. Sandwiches, water bottle, hand warmers, gum, ect. We didn't always have a cargo pocket to put stuff in. I've never needed one on patrol though.

[@jacobbrewer6495]

So with mags and holster blocking the hook and loop wont it be loose in those points between the two belts just like other belts? Causing the need for keepers? I find places where more then a few inches of the "velcro" is blocked require a keeper on either side to feel stable.

[@derrickcornelius8906]

I’m glad that I was able to watch that video you answered some of my questions,and I may have more in the near future. I’m about to buy my 2nd safe life vest so that I can carry more on top,the vest and belt you just demonstrated I’ll keep you informed once I get my gear and start setting everything in place,Again I enjoyed the video.

[@Mez642]

Where did you get the handcuff carriers with the locking attachment from? (Leo)

[@reynoldmondestin604]

Eclipseholsters

[@bigboy5661]

Can you drop a link for the handcuff pouches you used?

[@reynoldmondestin604]

eclipseholster.com.

[@veedubthug]

I love the set up but I was just wondering the handcuff cases who makes them where did you get them from I’m very much so interested in ordering a pair. Although I know this video is a couple of years old or really just one year old I already have the identical belt and magazine pouches!

[@Jayden_bruh]

Wouldent the clip on attachments and slide on attachments defeat the purpose of the iner Velcro belt? Seems like it won’t get a good Velcro connect with all those things covering the Velcro

[@Grizzly_actual]

Aspiring police officer here. I do tactical rifle training now and I have a couple of plate carriers set up. Is it at all possible to use those plate carriers as my duty equipment? Same goes for duty belt.

[@charliet3892]

Would keepers secure the MOLLE to the duty belt or is there a better way to secure them?

[@sandfire159]

Does that Safelite vest have a place for a backup weapon? If so could you do an in depth review of it?

[@IndiaJulietEcho]

No sir it doesn’t.

[@loganshaver5955]

I want to be a Police Officer and I would pick the Vest Carrier when I become a cop and the things that I would put on the Vest are Handcuffs Pepper Spray,Magazines,Flashlight Asp and Radio on the Vest and I would put the Firearm,Taser,Tourniquet and Glove Pouch on the Belt

[@natecrosman9506]

Love, love, love the unicorn coffee cup.

[@gameroffthecouch8076]

What do u recommend for a new cop to work for State Trooper, City police or Sheriff's and do you recommend work for security for about a year or two then become a police officer or just go straight to the Academy

[@ofc.montey7051]

I worked security while applying to departments, the hiring process is very long and difficult at times, lasting several months at minimum. I wouldn't say working security is necessary to becoming a cop. In my opinion working security didn't make me a better candidate. However, the most valuable thing I learned while working security was how to talk to people while enforcing rules. I would recommend working security for awhile if you are too young to join an academy or a department. The best thing you can do for yourself is apply to departments that sponsor your academy. They tend to be more competitive to get hired but it saves you a couple thousands of dollars in the end. Good luck

[@bruinsh]

just go to academy. security jobs are for you in the time frame you get out of school and cant get into law enforcement right away. Get into the pension system asap! If you dont want to go right into law enforcement, corrections would help with skills more than security.

[@ceasarmike1]

any videos on police reports. i like to get an idea on how it works

[@freefieldtraining]

I got you dude: kzbin.info/www/bejne/Zmqvd41jZsR7hLc

[@lmoore3rd]

Great video, those APX full size VHF radio antennas are real armpit pokers too. 😀

[@nathanwilliams3382]

Could I have the old radio

[@chrislinder7558]

What is the brand of his old vest I like the setup. It reminds me of the safelife defense molle uniform vest style

[@evalynchuran8684]

However i must say, you have the show CSI beat. This is cool to learn about.

[@MI2G1GGL3S]

I'd love to know what slide you switched to in order to mount the Trijicon RMR. I'm looking to do the same with mine, but most are way too flashy and don't allow co-witness suppressor sights.

[@joshuakemp3149]

Your mag pouch link does not lead to mag pouches, in fact there are non for sale on that site

[@troystarcher9364]

Where did you get that uniform/tactical carrier with 3 Molle webbings?

[@alliwantisfinancialstabili7414]

What's that in the 3rd magazine? I have yet to see a magazine that looks like that

[@Gmoney818]

AllIWantIsFinancialStability looks to be an extension baseplate to add 1 or 2 capacity.

[@abc4781]

I think he has bullets in it but I'm not sure lol I could be wrong.... let's face it , you walked into that one.

[@FluidITGuy]

I can't get snaps through that same belt. Please help. Right now I'm trying to stretch out the micro MOLLE with the back part of a butter knife

[@grry8]

What kind of clip is the mag carrier. Is it the 2 inch hard molle or x lock? Before I make a purchase on the website on Alegiance.

[@victoriamartinez267]

How do I request those allegiance holsters? They have options when I try to select them. For instance, X-lock, UBA, please lmk thanks

[@ddongarrison5382]

That unicorn coffee mug though..

[@troystarcher9364]

And also what are the names of the handcuff cases again?

[@danmillward4582]

Is there any belts like this available in the uk?

[@tlsosa3]

I can tell by the design of that new vest that you went to Eagles. If you know you know.

[@george3053]

Represent Sig P320!

[@williamdolan2673]

w one-a dem space sights with the red light dot thinger, there, no less! We're not in Kansas, no' mo', Toto. If my cheap ass dept gets RMRs before 2050, it'd be a miracle. Grants for yoga and 'coffee with a cop' are more important than kit, apparently.

[@pauljauregui9554]

I saw your video, thank you for the information and products. One question where can I purchase the handcuff case? I looked at Black Hawk brand and accessories but can't find it. Please let me know where I can purchase one. Thanks...

[@jordanfrancisco27]

That's a cool unicorn mug.

[@ybctadoe2669]

Where is his gear pouches from

[@ghost.9995]

I have a question, can police officers use their own firearms and modify them as they wish or are they issued firearms?

[@lockedon8953]

Depends what department, some like NYPD or LAPD issue them to you.

[@joshgroves1085]

Can you use revolvers on that kind of belt like full 6inch berrel

[@juanitaperez4921]

hello, those open cuff holsters are cool do you have a link to them

[@RayIT560]

Great video. Could you please provide the link to mag holster? I can't find it. Thank you.

[@Monster11B]

The belt had experience and character. It is a senior patrol belt. What cuff pouches are those?

[@paulcroft2856]

Eclipse holsters kydex cuff case

[@Mike38901]

Great video sir, just purchased a safelife tactical belt and i like those mag carriers. You said there was a discount code down below but I couldn’t find anything. Could you maybe please provide that code? Thank you

[@q-tip4723]

MOLLE has got to be the best invention since the wheel. Allows for full on customization and it holds strong when installed correctly. I refuse to go back to a traditional duty belt and standard uniform shirt carrier.

[@fraliexb]

Wow I have a clip with my Morphing Karambit like the single mags attached to the duty belt. I didn't know I could slide the button to make it not detach itself accidentally.

[@nb31b]

Taser holster is made by Blackhawk, not Bladetech 😉

[@JustSomeGuy769]

No Shit Sherlock

[@deandre8432]

@@JustSomeGuy769 watch ur mouth, sherlock

[@tonytran1841]

how bout some velcro on the tech locks? the more tech locks you use, the easier it is to slip under motion with a belt like that.

[@joeyb7408]

Right but can it pepperspray kneecaps or taze door knobs? Mmmm didn't think so 😎

[@AJTEphraim]

What’s your take on process servers? Is that a good career or a stepping stone into law enforcement? How is the pay?

[@alfonsom2385]

Where did you get the gun

[@abc4781]

He probably got it from a gun store lol

[@alfonsom2385]

@@abc4781 but you dont have to get it from the gun store i recently got one from a guy he had a couple cheap and a coupke expensive af and he had a gold ak but that was too much fckin money

[@Shaurya_Police_reacts]

What town dose he work for

[@cms9690]

Cauliflower Ear @ 20:04 Yup, this guy can wrassle.

[@freefieldtraining]

He is literally the scariest dude I have ever met in real life.

[@patronsaintofswitchbladefi2944]

What's the coupon code for Safelife ???

[@The_c984]

15off

[@patronsaintofswitchbladefi2944]

@@The_c984 Thank u sir .. I purchased the molle belt 4 days ago . I still have to wear my department issued basket weave belt for my SRO gig but I can run the molle belt for the summer contract security work I do .. I have a Volund Gearworks duty belt I've been using the past few summers but it has 0 molle & I don't like the thick "war belts" .. wish my department would go with the molle carrier as these concealment carrier's suck here in the FL humidity

[@tstar72]

Where can I get those cuff cases?

[@kevingalvach5268]

What are those handcuff cases