FREEWING AVANTI S V2 AFTERBURNER AND RADIO SETUPS PART 2 by FGFRC

Well here is the planes info and the tools I used to assemble it with:
Avanti S V2 PURCHASE LINK: www.motionrc.com/products/fre...
Features:
New! 80mm 12-blade ducted fan and powerful 3658-2150Kv brushless inrunner motor provides awesome power and incredible real life jet turbine sound
New! 100 Amp thrust reversing ESC
New! Color scheme picked by Motion RC customers
New! Optimized nose landing gear to reduce yaw and landing bounce
New! Redesigned nose landing gear door frame and gear doors to optimize aerodynamics and keep doors closed tighter
New! Thicker and stronger shock absorber parts in the main landing gear
New! More hinges to the horizontal stabilizer for improved elevator hinge strength
New! Upgraded control horns for more strength and reliability
New! Revised cockpit with pilot added
New! CG marker is now on the bottom of the wings
New! No bare white foam to prevent aging and discoloration
New! Fuselage belly protection strip prevents foam damage during landing, handling, and transport
Officially licensed by SebArt International, the Avanti's original designer
Digital hybrid metal gear servos throughout
Optimized ducting that eliminates the need for a cheater hole
Electric retracts and trailing link suspension struts for grass operation
Removable wings with quick disconnect plug
LED position lights on the wingtips, dorsal spine, and ventral keel
Magnetic removable nose cone with plastic cap for durability
Split flaps
specs:
Wingspan 1236mm / 48.7in
Length 1300mm / 51.2in
Flying Weight ~2800g / 98.7oz
CG (Center of Gravity) 105-110mm where wing's LE meets fuselage (see manual diagram)
Power System 3658-2150Kv brushless inrunner motor
Electronic Speed Control 100A thrust reversing ESC with EC5 connector
80mm EDF with 12-blade fan
Electric retracts and trailing link suspension struts for grass operation
Required Battery 6S 22.2V 4000-6000mAh LiPo with EC5 connector
Hinge Type Nylon reinforced hinges
Tool used for assembly: www.amazon.com/gp/product/B09...
Thanks for watching and staying up to date with Fat Guy Flies RC!
You do that by hitting that thumbs up button and subscribing to my channel! Also hit that little bell and you will be notified every time I upload a video!
God bless!!

[@FatGuyFliesRC]

Man I hope to maiden this bad boy soon!!!

[@amavial]

Thanks for share your knowledge, would you also share your Spektrum configuration file? Best regards!

[@FatGuyFliesRC]

Well not to be stupid but I have never done that but I will give it a go.

[@amavial]

​@@FatGuyFliesRC It's easy I done an export every month to backup my models. In my IX14 its in Model Utilities, export models... select the model and export (the difficult part is to locate the saved file) Thanks!

[@Dukesy]

does it sit with the nose in the air with no battery in?

[@FatGuyFliesRC]

Yes but they installed a plastic skid on the tail bottom.

[@Dukesy]

ok great. Ive got the v1 and the RC geeks afterburner. Just wondered it it was normal. I can move the battery for cg so should be fine