Fretboard Radius, Inlay & Position Markers - Building a Single Cut model Guitar (Parts 4)

  Рет қаралды 3,862

Unquendor Guitars

Unquendor Guitars

Күн бұрын

Пікірлер: 35
@mtem7068
@mtem7068 3 жыл бұрын
The inlay work was incredible
@UnquendorGuitars
@UnquendorGuitars 3 жыл бұрын
Hi Mtem,. Thank you very much for the compliment.
@russellscott1151
@russellscott1151 4 жыл бұрын
Like the trick with fabric backed sandpaper in the jewellers saw to get into the tight spots on inlays, thanks. Lovely looking fretboard.
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Russel, Thank you. Good to hear you liked the sandpaper 'trick'.
@jeffcrist2977
@jeffcrist2977 3 жыл бұрын
The linen-backed sandpaper in the jeweler's saw. I wrote that one down. Nice inlay.
@chogumchonsa
@chogumchonsa 4 жыл бұрын
That neck is stunning. Well done, sir.
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Joe, Thank you very much. I really appreciate it!
@jessijamesguitars7502
@jessijamesguitars7502 4 жыл бұрын
Looking good Dan, i like the inlay in that royal ebony, nice work Dan. JJ
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Jessi, Thanks man.
@jessijamesguitars7502
@jessijamesguitars7502 4 жыл бұрын
@@UnquendorGuitars your welcome
@brandonb1681
@brandonb1681 2 жыл бұрын
I really enjoy these tutorials. Very fun and informative to watch. TY.
@MattsGAP
@MattsGAP 4 жыл бұрын
I haven't seen tutorials as good as yours since the Fletcher handcrafted guitars ones! Thanks for making them your guitars look awesome!
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Guitars Amps & Pedals. Thank you so very much for these huge compliments.
@mrwaffles1394
@mrwaffles1394 4 жыл бұрын
Best part of my Monday, thanks Daniel!
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi David, Thanks man. I'm glad I can brighten up your Monday.
@johnnygonzales3211
@johnnygonzales3211 4 жыл бұрын
Beautiful workmanship my friend can’t wait to see the finished guitar😜
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Johnny, Thanks man. I'm afraid you have to be a little patient for the guitar to finish. But I'm sure it will be worth it.
@steveroberts
@steveroberts 4 жыл бұрын
Nice work as usual Daniel
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Steve, Thank you very much. I appreciate it.
@JohnClothier
@JohnClothier 4 жыл бұрын
Very nice work as always
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi John. Thank you a lot once again.
@__Slingy__
@__Slingy__ 4 жыл бұрын
Gorgeous ! It's always a pleasure to watch your videos, they are really well made and interesting. I'm looking forward to the next part !
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Arnoud, Thank you. I'm glad you like the videos and I'll do my best to keep them coming.
@troyhenjamin1144
@troyhenjamin1144 4 жыл бұрын
Just checked out your website.Very impressive. The Dark Nessa is the guitar I would pick if I could afford it. That is a beauty. You make awesome guitars.
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hey Troy, Thank you so very much for the kind words. I'm pretty proud on how the Dark Nessa or Morinessa turned out to be honest.
@ashleypowell8066
@ashleypowell8066 Жыл бұрын
At 18:00, why not use your long radius sanding block again?
@angrytroll27
@angrytroll27 4 жыл бұрын
What wood is the fretboard?
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Aaron, It's an Ebony fretboard.
@angrytroll27
@angrytroll27 4 жыл бұрын
@@UnquendorGuitars thanks. Macassar ebony?
@GloriousDutchPancakes
@GloriousDutchPancakes 4 жыл бұрын
Ik vroeg op een eerdere video of ik een nek met een Scarf joined kon maken zonder lintzaag. Het is me gelukt met een elektronische figuur zaag. En toen schoot de frees bit tijdens het frezen er twee keer uit. Zucht... Up dit punt ben ik echt de moed verloren. Zie morgen wel of ik het vormen ga doen.
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Mark, Een elektrische figuurzaag is inderdaad een goede optie i.p.v. een lintzaag. Vervelend om te horen dat het freesje uit de frees is gelopen. Ik kan natuurlijk niet zien hoe erg de 'schade' is, maar vaal is dit wel te repareren. Veel succes gewenst en je moet proberen toch de moed er in te houden. Komt het vandaag of morgen niet wacht dan gerust een paar dagen en ga er met frisse zin weer aan beginnen.
@GloriousDutchPancakes
@GloriousDutchPancakes 4 жыл бұрын
@@UnquendorGuitars ik ben er met een frisse blik weer tegen gegaan en heb het vormen afgekregen.
@GloriousDutchPancakes
@GloriousDutchPancakes 4 жыл бұрын
@@UnquendorGuitars de nek ligt nu te drogen onder de eerste laag finish
@UnquendorGuitars
@UnquendorGuitars 4 жыл бұрын
Hi Mark, Nou dat heb je snel gedaan. 👍
@GloriousDutchPancakes
@GloriousDutchPancakes 4 жыл бұрын
@@UnquendorGuitars yep. na de finish nog fretten zagen, radius en en dan het fretten zelf.
The Shed of Dreams ES 335 build Episode 23: Fretboard radiusing.
15:30
Adventures from the shed of dreams
Рет қаралды 3,1 М.
Почему Катар богатый? #shorts
0:45
Послезавтра
Рет қаралды 2 МЛН
Ful Video ☝🏻☝🏻☝🏻
1:01
Arkeolog
Рет қаралды 14 МЛН
What's Your Preferred Fretboard Radius?
8:06
Highline Guitars
Рет қаралды 27 М.
Fretboard Radius, fret install and epoxy inlays
23:31
Ewor Custom Guitars
Рет қаралды 3,1 М.
Fretboard Radius and Inlays
13:49
Randy's Guitars & Broncos
Рет қаралды 1 М.
Guitar build  - 09 - Wooden Fretboard Inlay
7:05
Tavori Guitars
Рет қаралды 4,6 М.