Friction stir welding simulation in abaqus - Coupled Eulerian Lagrangian CEL method - Part 1 of 3

[@MEBMDKASHIFRAZA]

Hello sir, it wars really a great tutorial Can you please tell me is there is any gap between tool and job Or they ae just touched or toll is penetrated in job?

[@Abaqus-Tutorials]

Initially there is a gap, then the tool moves downward and penetrate the job at appropriate depth

[@NoName-qt2ly]

Sir, is shoulder just touching the work or it is inserted too. Please tell.

[@HamzaDjeloud]

thank you sir for the clean presentation

[@achchannel2794]

At minute 9:01, do you mean tonne/mm3 instead of kg/mm3 ? The value of 2.7e-09 corresponds to tonne/mm3 unit.

[@achchannel2794]

Can you please clarify the units used in this video in the description ? Thank you.

[@enawgawassaye4236]

Great work. Do you have an idea about EDEM-ANSYS Fluent coupling for friction stir welding?

[@vishnuvenugopal6284]

Sir have you used any subroutine codes using FORTRAN etc in this abaqus analysis for heat flow

[@tariqanwaar1241]

Great video! Just a small question, can the same analysis be done in Ansys too? If yes which package will be appropriate?

[@Abaqus-Tutorials]

Sure! It is possible! It is possible by Ansys fluent but I prefer ANSYS APDL

[@advancedmanufacturinglectu3643]

@@Abaqus-Tutorials How can simulate on Ansys Please suggest

[@subhramghosh3406]

Great video sir, can u help me in the analysis of friction stir spot welding?

[@Abaqus-Tutorials]

ok

[@sahilgupta9675]

How Did you created partitions or offset face for seperating welding region

[@Abaqus-Tutorials]

You can in different method, example, 3 point method

[@hilalahmad5640]

Dr i want to do simulation on Abaqus please 🙏 guide me from where to start . I have no idea about this . Waiting for your response

[@mohamedmohamedabdelnabi3576]

Thanks so much for your efforts Is it possible to get a PDF file for this case study ?

[@Abaqus-Tutorials]

Not, yet

[@oumaimatrad1915]

hello just I wanna know how did you calculate the time period please?

[@anoopnn3319]

Hello, Very good simulation. How much was the computational time to simulate? Please let me know.. I had tried this CEL approach & it is taking me 1 week to just to simulated for 2 seconds after that it doesn't show increment in step time..

[@Abaqus-Tutorials]

In my case it took not more than 3days in 8ram computer

[@mohamedmohamedabdelnabi3576]

​@@Abaqus-Tutorials and processor ?

[@rajjani5392]

Hello sir, what is unit of specific heat that you have entered here?

[@Abaqus-Tutorials]

SI unit

[@oliverboulton7742]

Is it possible to get a PDF of all the material properties and model parameters?

[@Abaqus-Tutorials]

Not, yet

[@giahuy7488]

Dear Dr, Could you please tell me why you choose 875000 for specific heat capacity of steel

[@Abaqus-Tutorials]

In similar unit like other parameters! In your case you can customize based on your material

[@nikita_gabriel]

Hello. And could you send me the finished work "Friction Stir Welding"? I want to see how it all works, and I need a finished model for the Abaqus program. Thank you in advance.

[@Abaqus-Tutorials]

The finished work is almost similar to the video

[@ahamao]

thanks

[@teklebirhanfisseha4934]

Dear brother, it is quite interesting and you have demonstrated very well. can you write your contacts ? so that I can contact you.

[@sayanray3638]

re bhai cursor use korte ki hoy??

[@sahilgupta9675]

Is ti possible to perform this simulation on ANSYS with plunger.

[@Abaqus-Tutorials]

Definitely ! it possible and you can do in either APDL or Fluent

[@sahilgupta9675]

@@Abaqus-Tutorials Many videos are available on KZbin but no. One Showed weld tool with plunger in simulation. Only frictional heat simulation

[@sahilgupta9675]

Is possible to do so?

[@Abaqus-Tutorials]

@@sahilgupta9675 I was tried in ANSYS fluent a couple years ago, and I know it is possible!! try in fluent

[@sahilgupta9675]

Can you make video on this topic on ANSYS to guide

[@mohamedmohamedabdelnabi3576]

how can assign the interaction between the pin and the plate?

[@Abaqus-Tutorials]

That is general interaction, follow all 3 parts! This video is one of the 3

[@Abaqus-Tutorials]

That is general contact. Follow each steps in all 3 videos

[@alisaeed6703]

Greetings sir, i'm a UNDERGRADUATE student working on my FSW machine setup. Sir i face a problem in this simulation. I copied your tutorial step by step but in the end it shows error that fsw tool is not meshed properly for some reason. I tried 4 times but still got this error . Please help me.

[@Abaqus-Tutorials]

Create mesh by creating proper partition, or change mesh type and mesh size

[@surjeetsinghbaghel]

The unit of conductivity is W/(m.K) but you are working in mm so why you did not change it to W/(mm.K)

[@Abaqus-Tutorials]

it's changed.

[@NoName-qt2ly]

That would be mW/mmK

[@alokvikas2487]

From where you get values of Fsw ?

[@Abaqus-Tutorials]

Do you mean temperature value?

[@alokvikas2487]

@@Abaqus-Tutorials yess

[@Abaqus-Tutorials]

@@alokvikas2487 Check the "Nodal temperature" in field output request

[@anoopnn3319]

could you please upload part2 video?

[@alisaeed6703]

Sir can you share your thermal stress values with me. It will be very helpful.

[@KCloudEduKIENTHUCTONGHOP]

How to simulation the rocket impact and explopsion? Please help me. Thank so much

[@Abaqus-Tutorials]

I will upload about it

[@KCloudEduKIENTHUCTONGHOP]

@@Abaqus-Tutorials thank you so much

[@nish2000]

CAN U PLEASE PROVIDE SOFTWARE LINK FOR INSTALLATION

[@Abaqus-Tutorials]

go to getintopc.com

[@SawanKumar-wk2pp]

How can we get the CAE file of this simulation

[@Abaqus-Tutorials]

Mostly, not working due to it may corrupt or different version

[@SawanKumar-wk2pp]

@@Abaqus-Tutorials I need the file for project work ,as it is similar to mile project .can we get connected on Gmail.

[@SawanKumar-wk2pp]

Don't just some parts while uploading the video ,it's creates confusion

[@Abaqus-Tutorials]

Ok, Thanks!