it’s good that you found the yellow wire at fault on your washing machine. I saw another video where the guy showed that he put the hairdryer into the hole in the control unit and heated the control board up and not the wire harness where you found the yellow wire at fault. I tried his method and it seems to work for me. After about a minute and a half of the hairdryer on high and then plugging in the washer, it powered up normal. I think contacts on a relay are at fault, but I have not troubleshot it to that level as of yet. hope this info helps others.
@catchercoach49183 жыл бұрын
Thank you, nice ideas. Thanks for the good luck!
@AndiKadarusman3 жыл бұрын
Thanks for tips
@AndiKadarusman3 жыл бұрын
Very usefull
@pocketwatch62722 жыл бұрын
Adam, I have the exact same washer with the same E90 code, Can you give an update on your fix is it still working okay? Thanks in Advance….
@adammiller64512 жыл бұрын
so far that fix has held up, however since this video i had to end up replacing the motor control board because the drum wouldnt fill , i found the motor control board on ebay for about $60, if you are still receiving the e90 error after repairing the wiring harness the only other thing left would be the main control board which i have also seen on ebay for around 80-90