FrSky Taranis QX7: How to set up SWITCHES and BETAFLIGHT

[@dandarefpv1860]

I keep coming back to this video even though I wouldn't consider myself a 'true' noob anymore, simply because it is one of the best I've seen about this process. Clear, concise, no nonsense.

[@Goon872]

Thank for explaining stuff like we dont already know like every other fpv channel. They talk about getting people into the hobby but act like the basic stuff should already be known.

[@TheGregFarnum]

You are welcome I teach the way I want to learn

[@Norminal1]

Thanks so much. I have spent literally months trying to get my quads working after foolishly thinking I knew what I was doing 4.5 years ago. You made it simple and easy for us techtarded people. Thanks so much.

[@pavlosgrivas343]

What to say... Been struggling for two weeks now. You saved my “rear side” man. A million thanks. Clear, articulate and to the point. Big thank you😀😀

[@TheGregFarnum]

You bet Pavlos glad I could help!

[@gvanausdle]

Your a life saver. I was about to give up when I came across this tutorial. I couldn't find one on binding the tiny hawk 2 to the Tq. Thanks so much. It works!

[@TheGregFarnum]

I have one on Binding as well

[@Mad-A]

Dude, thank you. I'm brand new to this hobby and couldn't understand any of it till I seen this video. Literally got me flying for the first time. Thanks!

[@TheGregFarnum]

Glad I could help! its intimidating for sure but youlll get the hang of it!

[@My_Alchemical_Romance]

Your channel is seriously underrated.

[@vbp6us]

Best video on explaining this for a noob. Thank you!

[@LeeHazleton]

Greg, Fantastic videos! Can't thank you enough. I've been flying 1S brushed Tinywhoops for a while now with a Jumper T8SG V2 PLUS. I'm just making the move to brushless whoops. Bought a Tinyhawk 2, but the Jumper doesn't have D8, so I bought the Taranis QX7. Flies great! This wouldn't have been possible without your fantastic instruction. This is also my first time using Betaflight, which scared the hell out of me at first. You've made the entire process simple and painless.

[@TheGregFarnum]

Thank you Im going to have some more videos coming out on the process of setting it up too is there anything you are trying to do but don't know how?

[@LeeHazleton]

@@TheGregFarnum Everything's good for now. Just keep pumping out your top notch videos! Again, thanks!

[@gregfleer4251]

Thank's for the vid. Bought a tiny hawk 2 race and without your video I would not be able to fly it because the shops are closed and I jus tbought new frsky and don't know how to set one up. Also all the other videos are to had for me to understand and yours was perfect for me.

[@TheGregFarnum]

Glad it was easy to follow!

[@jonathanp639]

great video man. easy to follow. i love your tone of voice for this type of guide videos. keep it up. looking forward to watching the video about how to pair to the googles.

[@TheGregFarnum]

Thanks been away for a while but coming back to it and will have that video out soon!

[@aragamuffinmessagerofthelo2309]

Your the man thanks a lot I bought a HBJ 145 and I got it to bind but had no idea how to assign a arm switch and others now because you’re video I’m going crazy to get home and get er done lol thanks bro

[@amay8282]

Thanks to you I am cruising with my new tiny hawk 2 and xlite radio. Thanks so much for your help!

[@TheGregFarnum]

Awesome! Glad this helped out!

[@kevinroach9380]

Thumbs up on the videos! Easy to follow and get it done without any problems! THANK YOU!

[@TheGregFarnum]

Appreciate it Kevin!

[@MyTube4Utoo]

Thanks Greg! Just ordered my Tinyhawk II, and you made my life easier for when it arrives.

[@TheGregFarnum]

You'll love it!

[@duggerinc]

I've looked at many videos on how to setup switches, this one wins. Good job!

[@BlueOvals24]

Your 2 videos on this are going to help me a lot. I'm just getting into FPV and the QX7 was my radio of choice and I'll either be getting a Tinyhawk S or 2 after a bit of simulator flying.

[@g.s.921]

Absolutely the best and most thorough walkthrough!

[@RixFPV]

Total beginner and you helped me out a lot. One thing I learned through also was the binding. I just plugged in my TH2 to USB then in the console did bind_rx, set the radio, restarted and all was well. Thanks again!

[@ryanfay2059]

Thank you very much for this video. My first FPV drone is getting here 2 days, this video has made me more confident that I know what to do

[@ShorePelican55]

Thank you! Got my QX7 today and this video was invaluable in getting my Tinyhawk (original) working. FYI - this original Tinyhawk worked with Receiver settings of SPI RX Support and FRSKY_D, just like the S model. Will now try to set up my Tinyhawk Freestyle. Again - appreciate the step by step instructions.

[@IsraelRodriguez-qv8qc]

Excellent video, easy to follow, thanks!

[@ScottDavisPhotography]

Im looking to start this, great video easy to follow and understand, keep up the good work.

[@TheGregFarnum]

Thanks so much scott

[@graywoulf]

Thanks Greg for making this easy! You have a great way of presenting information in your videos. I hope you continue what you are doing for the hobby. I'm subbed.

[@TheGregFarnum]

I appreciate that!

[@levdi]

Thank you buddy, you helped, I could not set up the remote control for 2 weeks)))

[@nvfpv]

7:10 - wasnt the beeper the right 3 step switch not the left one?

[@shawnengle2316]

Thank You! I was also struggling and this video got my TH2S binded and in the air. First time ever and worked with my X-Lite Pro. Much appreciation ! Subscribed

[@MakerOnTheMove]

Thank you so much for these videos! They've been SUPER helpful. I just watched this and the previous video first to set up my Tinyhawk 2 a coupe weeks ago, and just now again to set up my new tinyhawk freestyle.

[@ZSHREDPJ]

Thank you so much! Such perfect information!!!

[@TheGregFarnum]

You bet!

[@dandarefpv1860]

Thank you! From this one video you now have a new subscriber. I look forward to more videos. Keep up the good work.

[@TheGregFarnum]

Welcome aboard!

[@jeromyboy1]

All your videos are so useful for me, thank you!

[@TheGregFarnum]

Happy to hear that!

[@matowin]

Omg the exact video I needed! Thank you!😍

[@jeromyboy1]

So super usefull and clear, thank you. Needed to watch it again hehe

[@TheGregFarnum]

Glad it was helpful!

[@jeromyboy1]

@@TheGregFarnum still having small issues, saying arm is disabled, but it is only on 1 channel

[@jeromyboy1]

My roll pitch yaw and throttle was all messed up so i got a throttle threshold warning, still learning... think I fixed it now

[@BertRoer]

I really like your text animations

[@CarbonEarth]

Great video Greg.

[@lando6673]

Thank you so much, for the videos. My tiny hawk 2 race is now working.

[@ragndroneman]

Just got my tinyhawk2 bound to and working with my qx7, thanks 👍😃👍

[@techFPV5964]

Very informative video keep'm coming kid!!✈️✈️🇺🇲

[@IsakBurger]

Thanks man! Brilliant video!

[@OleksandrBilokur]

What I was looking for) match) thanks) I was struggling how to set up the same drone and app) The main problem was with bad cable(betafligth shows the only Bluetooth)

[@TheGregFarnum]

Yeah i was having that issue too its hard to tell which ones are data and which are just for power

[@duanpeters5990]

I am able to get into betaflight but could you please help me with the settings for my tiny hawk 2 race?

[@sanacca]

Great videos! When are u making a video for binding the hawk to the goggles? Cheers!

[@djshaz101]

Thank you so much was struggling until I saw this!!!!!!

[@christophhaas5696]

So now i need to know how to connect the goggles to the drone 😉

[@winstonwesthafer6510]

Thx this video has helped me out a lot!

[@TheGregFarnum]

Glad to hear it!

[@WillyFPV]

Thank you Greg.

[@Roundawg]

I be damned. A JB without all the bullshit.

[@gliebig100]

What are the benefits of this over the controller that comes with the rtf kit?

[@MABdrone]

Nice tutorial, thank you!

[@swimbeyonder]

why my configuration page is different from yours? i don't have the image of the drone and other stuff

[@jameskemp7243]

Hey greg i love your videos thay helped set the drone up and bind the radio but my tiny hawk s atill flashes red after taking it out of bind mode with no throtol witch won't let me arm or put it in beeper plz respond i have had the drone for almost 2 years and have never flown it.

[@jesusmendez9973]

You're the man.

[@TheGregFarnum]

Haha thanks!

[@mattlago]

Ty! This helped a ton

[@simonzednik3362]

Thank you very much! This tutorial is perfect! But I can't connect to the BetaFlight :( Can you please help me?

[@TheGregFarnum]

Yeah for sure what’s not connecting your drone?

[@simonzednik3362]

@@TheGregFarnum I have opened BetaFlight and connected drone to pc (USB), diode is light so it's connected to PC but when I click to "Connect" button it doesn't do anything... (Sorry for grammar I'am from Czech Republic...)

[@simonzednik3362]

@@TheGregFarnum Without BetaFlight is drone working, propellers are spinning but drone can't fly... I have done everything same like you (without BetaFlight because I don't know how to pair drone with program...)

[@TheGregFarnum]

You might have to flash the firmware on the drone. which drone do you have?

[@simonzednik3362]

@@TheGregFarnum Mother board: F4, firmware MATEKF411 BEC 3A, 4in1 Rx Tiny EMAX, D8

[@ryanfay2059]

Which method did you use to get the left stick to stay down instead of springing to the middle?

[@antonlianpascua5099]

Should I set up the switches and betaflight before I bind it with the drone?

[@dollarbillclinton4327]

Great video really,newbee, you made it easy, I'll be sticking around,,,,,😎

[@TheGregFarnum]

Awesome, thank you!

[@mlostekk]

Where is "the next video" connecting it to the goggles and start flying? I can't find that one

[@sumdood2035]

Even though i have mine setup like yours, the beeper and turtle both light up when i move to last position. Turtle doesn't seem to be activating in the middle position. I haven't tried in an actual flight, but it doesn't seem right.

[@midwestaerialdatasolutions8503]

Success! Thank you!

[@cwdgamedev1017]

What is the 'Flip Over After Crash' mode all about? I set the aux channel but nothing happens when I hit that switch with the quad armed

[@davidmcnae]

Is this the same for setting up the 2 Freestyle? Just bought that and the same controller.

[@lightlinemedia5775]

Thank you for these videos. So helpful. So why turn on the uart1 serial rx switch? What does it add? Thanks again!

[@thisisspartan5953]

Excellent video as usual... !!! I need some help please !!! I have an eflite viper 70 mm edf and I bind my Taranis QX7 with Spektrum Rx AR636A AS3X using the JP4IN1 Jumper Multiprotocol Module....... everything is working good, but I don't know how to make the Safe works, how can I assign a switch to enable or unable that option?..... I'll appreciate any help... thank you....

[@tumixas]

i did everything follow your video - but cant start the motors . On the Beta flight all controls from transmiter works fine - dont no what elese I can do. Sorry im beginer :(

[@nicolajhaahr6714]

Hey! I have a problem I bought a taranis qx7 for a couple of weeks ago and practice in velocidrone simulator. Now i got myself a tinyhawk freestyle 2. I did manage to connect the controller to the drone and bind sticks. My problem is. when i throttle, the propellers start spinning, but not enough to get in to air. When i roll/tilt it only tries to go left.

[@mikeodell5915]

Thank u. Subscribed earned. Respect

[@TheGregFarnum]

Much appreciated! Need to get back on the grind

[@crisandimo]

increible paso a paso muchas gracias bro

[@CarbonGlassMan]

Does this only work for 8 channels? I cannot get channel 9 to work no matter what. I set it up in the radio just like you've done but in Betaflight that switch for channel or Input 9 does not work. It should be AUX5 in Betaflight but it does not move when I hit the switch. Everything else works.

[@RafaelOliveira-km7bo]

Thanks man!

[@gliebig100]

I purchased the QX7 controller. Doesn't look like it comes with everything included. What else do I need?

[@bob14072]

I'm using the EMAX Tinyhawk 2.5 Freestyle BNF. I did everything you did and it works. But, when I throttle down the motors slow for a second and then speed up. According to Betaflight 1 and 4 motors are almost full throttle, 2 and 3 are about half. The only way it stops is when i switch off the Arm. Any Idea how to fix this?

[@katari91]

Hi. Great video, got my first quad flying. But I have an issue now, I wanted to go back and add a prearm, have set the switch I want to use up on the Taranis in both Inputs and Mixer, and this looks to be working fine on the radios main menu. However when I go into betaflight it does not recognise that the new switch has been assigned, I flip it and nothing happens. Do I need to re-bind the quad after setting uo new switches?

[@薛懷恩-u2b]

How to add the acro mode ? please help me

[@lordandythegreat]

@Greg how did you get betaflight?

[@cometpowell]

still have that darn disable in beta flight for the arm switch. CLI and MSP arent the issue. any suggestions?

[@munterboy9298]

Will this work with betafpv too

[@antoniodivito3179]

when i try to arm.. the quad blinking fast. the other inputs are ok .. what's wrong ?

[@MrDavcrockett]

I can't get my QX7 to work with my Tinyhawk 2. I followed you all the way until i get to config, dshot600, receiver-serial-based, serial receiver provider-SBUS, then when I go to Receiver to see if stick moves on beta flight, nothing works. no movement.

[@fallinshadow1]

Followed it to a T but not fully working. Everything checks out in Betaflight, but I cant get it to arm. I can make it beep and change modes but arm is the only thing that doesn't work. Im using the Frsky X7 and the Tiny Hawk 2. Any help would be appreciated

[@bobhoward3555]

Help 😥. I followed along. Nice instructions. But, my sticks are reversed. Throttle is where pitch used to be. How do I fix that? Thanks

[@bobhoward3555]

Thanks, I figured it out.

[@TheGregFarnum]

Glad you were able to figure it out!

[@ArlindoOliveira81]

How did you solve it??? Same is happening to me

[@bobhoward3555]

@@ArlindoOliveira81 it was a mapping problem in betaflight. Just check the channels. Good luck.

[@balintregoczi7190]

Please make a goggle setup video!!!🙏

[@twp3029]

why are my aux switches not working in beta flight? everything else shows the radio controller to be working.

[@lorenzoantoniazzi1718]

thanks for this good tutorial! anybody knows why in the receiver tab my sticks can't move any of the bars? (i have telemetry, the receiver is binded to the radio)

[@xiao9738]

Can the controller use for (Original Eachine Tyro79 FPV Racing RC Drone DIY Version F4 OSD 20A BLHeli) the drone?

[@rafaellopes4271]

I’m trying to activate AUX 5, I put it on mixer but on betaflight only work until AUX 4, can you help me?

[@Nosferatu10]

I got everything working but the throttle what's going on?

[@pavlosgrivas343]

Greg hi again. I need your help mate perhaps you could help me: After a couple of “fall off the sky” type of crashes, my tinyhawk 2 just comes in and out of bind. Sometimes just after connecting a fully charged battery it beeps intermittently and does not connect to transmitter, sometimes it binds and starts to fly and after a few seconds it just falls from sky again. Any ideas?

[@TheGregFarnum]

I would try and flash drone in betaflight and reload the newest firmware could be a bug in the version you are using.

[@TheTwistty1]

when I go into setting up my switches, I get arm (disabled) when I try to set up the aux 1. Anyone know why or how to get around this?

[@Nosferatu10]

Is this a taranis X7 access? Bc im tying to pair and found out its not pairing bc there is no d8 mode on this thing. Very new to the fpv world and literally everything got delivered today my fatshark my drone and taranis Q X7 access. Any help you could offer? I can't find anything on firmware updates only thing I've found is frsky XJT lite-2.4ghz 16ch radio transmitter module to make it compatible.

[@toneproductions1]

you need the XJT module for the Taranis to get D8

[@Jackrichardsvids]

how do you actually arm turtle mode, that is the only switch not working

[@TheGregFarnum]

There is a separate setup in the programming. its a sequence of flipping switches off and on

[@davidfrangos3702]

Does anyone know if I can use a frsky taranis qx7 with velocidrone on my macbook? I have a 2016 running OS Catalina. I'm desperate to start learning to fly but I cant find the answer to this question anywhere so I'm not sure which transmitter to buy.

[@40gats57]

Hi! Can i download iNav on a HP Stream?

[@TheGregFarnum]

Im not sure

[@kylefink3929]

liked and subscribed

[@TheGregFarnum]

Thanks Kyle!

[@jeanbon2796]

Greg thanks very mutch,la France say to you yeahhhhh

[@KDyurt]

Just bought a Tinyhawk 2. Can anyone help :( Followed this video step buy step and I ve accidently hit reset settings in the Setup menu on Betaflight and now I have no lights when plugged in . Also when the battery is connected to the drone. It flashes various coulour for 5 seconds and shuts off. Any advice or have I Made a big booboo. Any help would be greatful :)

[@TheGregFarnum]

Try flashing the firmware

[@SimoneBoemio]

Help! Sorry! I don't have UART1 and UART2!!! Thanks

[@My_Alchemical_Romance]

This is impossible to bind with the D16 version of this remote. Dont make the same mistake I have. I have purchased the TinyHawk Freestyle, as well as a non-EU version of the FRSKY TaranisQ X7 (access) I have effectively spent over $400 on the two; and neither of them I can use. Majorly pissed.

[@wolle_der_dolle6236]

Where is the Video how to Connect the googles?

[@applejacks9056]

Where is the video how to connect fpv goggles