Thank you so much for the help. I couldnt figure out why my drone wouldnt work after binding the frsky to the drone and now i know why.
@FPVEvilMunkey2 жыл бұрын
Glad it helped.
@guts50162 жыл бұрын
@@FPVEvilMunkey i do have one problem though. When i push the throttle up slightly it just goes to 100 automatically.
@Einstine19845 жыл бұрын
Thank you! That's exactly what I needed
@FPVEvilMunkey5 жыл бұрын
Your very welcome thanks for watching
@cheezenation91824 жыл бұрын
I got a new emax tiny hawk freestyle and I was having trouble but thanks to this video It made everything a lot easier thank you man. Now I can bind it and it can fly
@FPVEvilMunkey4 жыл бұрын
Glad it helped, and thanks for watching.
@900Redshark4 жыл бұрын
Same here! But I am still super confused I need some major help! My controller is set to ARM and it works so I am able to fly (just not the best). How can I put my TinyHawk into a more beginner mode like Horizon (if that’s possible)? Which leads me to my next question. If I set a switch to do what I want like (horizon mode or turtle mode or whatever etc) how does that switch KNOW that’s what it’s for? Does that make sense? I was also able to connect my drone to BetaFlight...but my controller did not work on BetaFlight. Any help would be awesome I am so lost. I’ve been flying Traxxas drones my whole life but this stuff makes no sense to me! Oh and when I was flying last night...every time my drone landed upside down after a crash it just when FULL Throttle by it self!!
@FPVEvilMunkey4 жыл бұрын
@@900Redshark you have to setup the modes in Betaflight. You have to tell Betaflight the switch and what position.
@900Redshark4 жыл бұрын
FPV_EvilMunkey Ok I’ll look into that more. Do you happen to know why the drone goes full power when it crashes or flips on its back? Or is that something that could be anything and I just need to figure it out myself? Thanks for your time.
@FPVEvilMunkey4 жыл бұрын
@@900Redshark you might have air mode turned on permanently make sure that is turned off and set to a aux switch
@dronereviewman95805 жыл бұрын
Thanks 4 posting this man!!!! I love my qx7 i just wish it was black!!! Mine is white but i really like it!!
@FPVEvilMunkey5 жыл бұрын
Ya I love the black for sure. I know they make skins and covers for them.
@xmwxmorris5 жыл бұрын
By far the best video for setup.. thank you so much
@FPVEvilMunkey5 жыл бұрын
Thank you very much appreciated
@metrocaptain3 жыл бұрын
Thanks. Got the switches set up correctly.
@FPVEvilMunkey3 жыл бұрын
Your welcome and thanks for watching
@seferon100 Жыл бұрын
Omg. You are genius thank you very much for this video.
@WhoFPV5 жыл бұрын
This is great and helpful channel! Happy to have subscribed!
@FPVEvilMunkey5 жыл бұрын
Thanks man very much appreciated!!
@skygroover66924 жыл бұрын
Thank you for the great video. Learned Alot from this one
@FPVEvilMunkey4 жыл бұрын
Thank you, and thanks for watching.
@OzzyFpv3 жыл бұрын
Nice Explanation Aviator Thank You!
@Juanfernino2 жыл бұрын
This was really helpful! Thanks so much!
@oussamasmaini72972 жыл бұрын
🤣Nice man. I like rick and morty sound
@tonyc704911 ай бұрын
I know this is a old video, but I have a ? I'm using a Taranis Q7X on Liftoff and cannot get the switches to take, using the sim's controller interface. I'm not using Beta Flight and prefer not too.Rather not learn another piece of software at age 70....The ? is, will the input screen do the job, or is the mix page also necessary for the sim to see the switches. Thanks for you excellent content Tony
@CALIKID906034 жыл бұрын
My opentx is mode2 TAER and my QX7 trainer mode source is channel order TAER, but my mixer and inputs channel order is AETR. When I try to change the AETR to TAER, it throws off the channel mapping in beta flight.
@johngarcia569511 ай бұрын
Thank you. Thank you. Thank you!!!
@mario76rcheli734 жыл бұрын
WOW super video , slow and clear 👍
@FPVEvilMunkey4 жыл бұрын
Thank you very much!!!
@IKK4204 жыл бұрын
Awesome Dude Thank You!!!
@FPVEvilMunkey4 жыл бұрын
Your welcome man thanks for watching
@dosc64303 жыл бұрын
Thank you so much!
@FPVEvilMunkey3 жыл бұрын
Glad it helped
@DigitalN8v3 жыл бұрын
Can you do a video on the tools. I was suprised to find the taranis qx7 access has a spectrum analyzer. And was wondering if OpenTx offers other tools. And also a demo on calibrating the joysticks and switches would be helpful.
@hanzyali86555 жыл бұрын
legend
@rweb31754 жыл бұрын
Hey dude, I need help. I have a Taranis Q X7 controller, which worked perfectly for months. But a problem just appeared, when the sticks are centered, it shows on the screen that they are actually not, they're at about a 2.5 degree angle, both of them. This affects flying pretty badly, do you know how I could fix this ?
@FPVEvilMunkey4 жыл бұрын
You need to recalibrate the pots.
@rweb31754 жыл бұрын
@@FPVEvilMunkey And how do I do that?
@FPVEvilMunkey4 жыл бұрын
@@rweb3175 it's in the initial setup video
@RosscoStixFpV2 жыл бұрын
For some reason I use the same arming switch but in betaflight it's aux 4 why is that?
@ddomtive3 жыл бұрын
Not working i use crossfire do i have to do something in the crossfire setting
@oded_104 жыл бұрын
Can I use the transmitter for aircraft and helicopters as well?
@FPVEvilMunkey4 жыл бұрын
Yes you can.
@wvo93233 жыл бұрын
Bro i have one doubt. one model is bind with my receiver. can I bind second model in same receiver? Because it didn't work for me .so I ask this question.
@FPVEvilMunkey3 жыл бұрын
I usually don't bind more than 1. I have done it on Tiny Whoops with D8 but that's it otherwise mine are all separate. You can also bind to multiples with Crossfire
@thisisspartan59534 жыл бұрын
Excellent video as usual... !!! I need some help please !!! I have an eflite viper 70 mm edf and I bind my Taranis QX7 with Spektrum Rx AR636A AS3X using the JP4IN1 Jumper Multiprotocol Module....... everything is working good, but I don't know how to make the Safe works, how can I assign a switch to enable or unable that option?..... I'll appreciate any help... thank you....
@FPVEvilMunkey4 жыл бұрын
Thank you. I honestly don't know anything about that module. I only use the TBS Crossfire.
@Ripen32 жыл бұрын
I'm having a problem, my 3-step switches register as 0%-50%-0%, i would like one of the zeros to be 100% but couldnt figure out how..
@KraljTomislavI4 жыл бұрын
Orange rx Tx6i or frsky taranis qx7 for rc plane? It is taranis qx7 just for racing drone?
@Robert-bu5fv5 жыл бұрын
Nice!!
@FPVEvilMunkey5 жыл бұрын
Thanks!!
@brayden58883 жыл бұрын
How did you get it to say the modes? I’d like to set the voice up on my switches without having to use an sd card
@FPVEvilMunkey3 жыл бұрын
The SD card is what stores all the sounds you want to use
@brayden58883 жыл бұрын
@@FPVEvilMunkey I mean the regular voice, for example your modes
@FPVEvilMunkey3 жыл бұрын
Same you have to download the sound pack to the SD card. I have a 3rd video on how to change sounds
@marks63254 жыл бұрын
Great video! How do I get the sounds??
@FPVEvilMunkey4 жыл бұрын
There are all kinds of places to find them just search for FrSky Taranis sound packs
@RosscoStixFpV2 жыл бұрын
What channel is aux 1?
@arieljunco1182 Жыл бұрын
Hola , no encuentro el video num 1....
@KelvinFPV5 жыл бұрын
Why do you use input? Mixer alone does the same thing
@FPVEvilMunkey5 жыл бұрын
Just how I learned how to set it up, and it works for me flawlessly.
@TheSkyPod4 жыл бұрын
No ACRO or Rate modes show in the mode adjustment in BETAFLIGHT or INAV . Very confusing . Maybe show after you set that 3 position switch on how to setup in Betaflight .
@FPVEvilMunkey4 жыл бұрын
You won't see Rate or Acro. There is Angle which is Stability mode. Horizon, and also Air Mode
@TheSkyPod4 жыл бұрын
@@FPVEvilMunkey Yes that is why I wondered why it was mentioned. If I have a 3 position switch I want for flight modes , which 3 are used , or are only 2 used (Horizon & Angle) , and the third is just no mode at all ?
@FPVEvilMunkey4 жыл бұрын
You can set the switches to whatever you want. Here is a Betaflight tutorial I did a while back. kzbin.info/www/bejne/i2i5o6yKn92Lfqc
@subhajitsaha9924 жыл бұрын
Sir I m new here ... I try to see my qx7 ...I had no idea still i play with my radio nd try to practice how to celect switch ...sir I make a switch name arm nd then don't know wht I did but so many lines come into arm switch ..I think I did mess with arm swich now I want to delete that arm switch I created ...but transmiter not give me option to delete chanel ... Sir pls help me how to delete any chanel if I did mistake .... ? Hope I eble to explain my problem .... Any way to undo a newly created chanel ? Delete channel ?
@JonahBam4 жыл бұрын
I have a kiss rig can I d\still do this through beta flight
@FPVEvilMunkey4 жыл бұрын
I think Kiss has it's own GUI you use
@JonahBam4 жыл бұрын
FPV_EvilMunkey yep thanks for that do you have a clue how to change stick inputs meaning my throttle is where yaw should be and so on I can’t figure out how to change it. Appreciate the quick response! Thank you
@FPVEvilMunkey4 жыл бұрын
Follow my part 1 it will take you thru the initial setup. Might be not mapped correctly
@JonahBam4 жыл бұрын
FPV_EvilMunkey thank you a million just figured it out really appreciate it:)