FS2020: Velocity One Sensitivities Revisited - & How to Use Your T-Flight Rudder Pedals with it!

Thank you, very helpful -as always 🙂 I just got my Velocity One today as a late Xmas present, can't wait to try it.

[@Huddison]

Now there's something to look forward to - enjoy it, once it arrives ;)

[@Murphy_Peoples]

Thanks for posting this! It is greatly appreciated!

[@Huddison]

No worries Murphy

[@AcesDwn1]

Great vid as usual Huddison! Excellent information!

[@Huddison]

Thanks my friend

[@QuantatativeStealing]

I've really struggled with the Trim wheel...find myself constantlynose up or down too much barely touching it...drives me mad(flies me mad?) ..so I'll try -19 on both..thanks for the information :-)

[@Huddison]

No problem; it definitely needs a bit of sensitivity putting on it.

[@AlfredoLopez-qf5dw]

the trim wheel and elevators have me stressed

[@QuantatativeStealing]

@@AlfredoLopez-qf5dw Try this...before you take off, go to outside view and move Trim + or - and back to Zero. This kind of resets it and when you're in the air you won't get the silly + unrealistic response when you trim for cruise or climb etc Give it a try..I'm on Xbox S by the way.

[@RealBaldnold]

Great video as always sir!

[@Huddison]

Thank you & always appreciated ;)

[@dennisrogers6786]

Found jets had to turn sensitivity to 80+ 80- for jets, turning left and right, 70+ and 70- for altitude adjustment

[@Huddison]

Excellent, thanks for the tips.

[@saleasylum]

Another great video. Those settings work well for me. Do you know how to raise the volume of the headphone jack? Very annoying.

[@Huddison]

Great to know they work well for you also - I've not actually used the headphone jack as of yet, but I know a member of my Discord was discussing it the other day. You're most welcome to join the Discord and ask there :)

[@lancepeltier1081]

Setting the sensitivity for elevators on mine has been challenging because when the yoke is physically centered it's not centered on the sensitivity screen. It rests a few degrees nose up so I've had to move the neutral and expand the center dead zone. I don't have as much real estate on the pull up side now so it feels a bit twitchy.

[@Huddison]

That doesn't sound correct Lance. You may be in possession of a slightly faulty yoke.

[@lancepeltier1081]

@@Huddison Yeah, I'm waiting on a reply from Turtle Beach on that. Just trying to make the best of it for now.

[@Huddison]

@@lancepeltier1081 Best of luck Lance.

[@LGTheOneFreeMan]

I know this was 7 months ago, but look up how to calibrate your yoke. Mine was the same way but works perfectly after calibration. They're supposed to be done out of the factory, but a few are off-center.

[@lancepeltier1081]

@@LGTheOneFreeMan I appreciate the info but I did finally figure that out shortly after I posted that. Works perfectly now. Thanks and happy flying.

[@Old_B52H_Gunner]

Now that I got mine I see why you have a trim fixation lol.

[@Huddison]

Great isn't it ;)

[@Old_B52H_Gunner]

@@Huddison it’s amazing though a bit to sensitive out of the box, especially for some reason with the Diamond DA62, I adjusted the sensitivity and it was perfect. Too bad like the Hotas, it won’t save the sensitivity settings.

[@Huddison]

@@Old_B52H_Gunner Yes lets hope the sensitivity saving issue is addressed next.

[@dizzychoonz]

Oh.. i dont think youve ever mentioned how much you like the trim wheel...do you like it ?

[@Huddison]

Just a bit 😉

[@adlymuhtadi7072]

@huddison been using the velocity one yolk set up now for a week. Really enjoy it however I've got an issue with the rudder control on flight sim xbox. I use the trigger buttons on the yolk itself and for some reason the right rudder works but when I press the left rudder it doesn't? I'm not sure is this a bug or has anyone else encountered the same problem. Using the same trigger buttons on the actual xbox controller doesn't present any issue at all with rudder movement. Any ideas?

[@Huddison]

Do you have any assists enabled under Assistance options/Piloting? Are you on Xbox or PC?

[@adlymuhtadi7072]

@@Huddison I'm an xbox user. No assists I have all modes set to 'hard' to reflect genuine flight conditions and have disabled any sort of assists

[@saleasylum]

I'm having trouble finding aileron trim and mixture in the settings. Any ideas?

[@Huddison]

I shall respond as soon s I'm able to get 'back in MSFS'.

[@texasrando2964]

I can’t get my mixture lever right either. Goes to cut off around 50%

[@karlluinen5034]

Hi Huddison I have finally managed my first go on my new velocity one system I got for christmas. Just took the 152 out for a fly and every time I access the menu system and return to flight my engines have totally cut out. Even pulling the power knob does nothing they have totally stopped and need restarting. Any ideas what is wrong pal ?

[@Huddison]

Check out this video, re the throttle cut out: kzbin.info/www/bejne/fZPJoXp9hsZ0qc0

[@karlluinen5034]

@@Huddison Cheers pal hope this gets patched soon.

[@Christophedb1984]

Nice do you have settings for the jets maybe?

[@Christophedb1984]

Airliners?

[@Huddison]

I don't believe so with this Hotas, but I'm aiming to cover that with another Hotas setup.

[@bryce.hooops]

Have they made a preorder date yet for the honeycomb for xbox

[@Huddison]

Not that I know of yet.

[@danprocaccio]

Anyone else having problems with the v1 yoke neutral point on xbox? when I am not moving the yolk in the sensitivity settings, axis 3 (on xbox the push and pull of the yolk) neutral point is below the center and off to the left. It also doesn't reach the top all the way when pushing completely forward.

[@Huddison]

Hmm sounds interesting Dan - not experienced that myself yet.

[@joseandrade3459]

Hello Huddison. Is it possible to use My Litlle Nav Map on msfs 2020 for X box X? Have a great New Year and be carefuul with covid

[@Huddison]

Hi Jose, as far as I'm aware, you cannot use little Nav Map with the Series X (or S) - at least not yet.

[@joseandrade3459]

@@Huddison thanks. X box is close to add on's. Lets see in the future. See you

[@kevinrochel1886]

Hi Huddison, i have watched your videos , but the flight velocity thatI have is kind difficult to setup so that i can start flying. The instrument doesn’t display , the flight control is not responding although there are all plugged in properly. The support help is not very helping. Is that possible to get helped here?

[@Huddison]

First thing I suggest Kevin is to look through my Velocity One Playlist, to see if a video there might ease your issues: kzbin.info/aero/PLEIvySbqiwXW1APLhY9CpOJHDU6GFDEGD Otherwise, pop onto our Discord & we might be able to help.: discord.gg/xDKwFYDsZk

[@kevinrochel1886]

@@Huddison thanks, I will look into them and see if I find a solution.

[@dizzychoonz]

How about the rudder pedals and pc?

[@Huddison]

They work flawlessly on PC - just plug them straight into a spare USB port.

[@b0ris360]

Im going to get this for my xbox x. I currently just use an xbox controller to do everything. Will I still need to use my xbox controller with the velocity one for looking around and menus or is the Velocity one on it's own able to do everything? Or would you recommend a mouse + velocity One?

[@Huddison]

Both combos will work, but a mouse is slicker ;)

[@karlluinen5034]

I take it they still do not save on the Xbox yet. What a pain inputting them every time.

[@Huddison]

I still can't save them, but I've heard that some can; I'm trying to get to the truth of that.

[@cvt8001]

@@Huddison Do you know how do I fix this issue? When I back out of control options and resume the flight than the plan is out control falling out of the sky. Same thing happened after using the pause menu.

[@Huddison]

@@cvt8001 Is that with the Velocity One? If so, this will help: kzbin.info/www/bejne/fZPJoXp9hsZ0qc0

[@get_outdoors]

Xbox series X, I’m not able to retain sensitivity setting between sessions.

[@thelatman9397]

I keep checking the official forums, apparenrly, some on the beta test for the upcoming SU say it's been fixed. I don't see it mentioned anywhere in the bug logs though, so take that with a pinch of salt. At the very least, they are looking into it. I was in conversation with someone on Reddit a while back, who claimed his sensitivities for his HOTAS saved (on Xbox) without issue.

[@get_outdoors]

Hi, have you got any play on the V1F shaft? Cheers

[@Huddison]

I've not noticed much play on my unit, but I'm sure TB will help sort you out asap.

[@get_outdoors]

@@Huddison I hope they do stand by their newly launched product, I’m sure it’s just an early build teething issue. 👍

[@Huddison]

They comment often on my videos about the yoke system; they'll do you well for sure 👍

[@starroger]

Are your V1 F Yoke sensitivities the same for the C182 RG and C207?

[@Huddison]

I haven't tried both with the V1 Yoke as of yet; but the sensitivities are the same using my Honeycomb XPC yoke.

[@denodan]

In a real aircraft, they are not sluggish, but very little movement required, I have had 8 hours flying in a tomahawk single engine, you setting looks far to sluggish does not take much in the air to have a big effect. I find in this respect my Xbox controller is more realistic sensitivity a real aircraftcrequires very little input to make a hugh difference

[@Huddison]

Great to know

[@ialjuna]

Too much talking !!!

[@Huddison]

😜

[@dizzychoonz]

@@Huddison ok? who switched on the Idiot ??..come on who was it?

[@Huddison]

@@dizzychoonz 😂