Fuel Injection cleaning in less than 5 Minutes/HOW TO clean injection Directly without disassembling

#ALIMECH #injection #cleaning #toyota
Injector Tester AND adapter: amzn.to/3JJXXfQ
100pcs Fuel Injector Precision Filter: amzn.to/4bhx7at
In this video, i will show you Fuel Injection cleaning in less than 5 Minutes , how to Clean the fuel injection of any car in less than 5 minutes Directly without disassembling any injections, it will be direct injection cleaning by connecting carb cleaner can to injector rail, and staring up the engine BUT keep in mind to remove the fuel pump fuse or the fuel pump harness, like i did, because we don't need fuel pump to push gasoline, the fuel line is disconnected, carb cleaner can connected instead with an adapter
TOYOTA CAMRY 2015-2017 Fuel injector removing: • TOYOTA CAMRY 2015-2017...
How i made the wire: • Make your DIY Fuel Inj...
Push switch: s.click.aliexpress.com/e/_9watAN
Alligator wire clip: s.click.aliexpress.com/e/_9iOwuz
100pcs Fuel Injector Precision Filter: s.click.aliexpress.com/e/_9QxyAh
Injector Tester: s.click.aliexpress.com/e/_DFE...
this is the easiest way of HOW TO clean injection Directly without disassembling of any car
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon EOS M50 Mirrorless: amzn.to/35BdSsU
DJI Ronin-SC - Camera Stabilizer: amzn.to/3wINHwm
Andoer 3-Wheels Wireless Remote Control Motorized Camera: amzn.to/3vDuf2D
Gopro Max 360: amzn.to/345NNTf
For contact
email address: [e-mail]
Facebook account : ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

[@mustyali9529]

The best fuel injector cleaning video i have seen yet. Short, brief and concise.

[@AliMECH]

Tha ks brother appreciate that

[@AliMECH]

@The Edwin Manna Filez no, its toyota camry 2017

[@AliMECH]

Yes, if I have that car on my hand

[@JaySingh-ex6xc]

Very very Good

[@sbyseven]

Yes, 100% agree, the only thing I made different is put new o rings in all the injectors every time I clean them.

[@billmilstead1473]

I was pretty shocked at how easily this worked! I actually used a 9 volt battery to do it. Crazy! Thank you so much for this video!

[@AliMECH]

You're welcome! Glad it was helpful

[@randyu01]

If only all car repair videos on KZbin were this concise and to the point! I'm a 30+ year mechanic here and I sometimes do it this way myself. But being an old guy, I don't make videos. Glad folks like AliMECH do! Great video from the standpoint of information and camera work alike.

[@AliMECH]

Thanks , appreciate that

[@boris1986]

This video is just pure gold -- easy instructions, clear visuals and no unnecessary info or babbling. Thank you so much! My car is too old (Hyundai Accent X3, 1995) and I can't get any new injectors (for a reasonable price), so this really helped me out!

[@AliMECH]

Glad it was helpful! I like to keep my videos shot and right to the point

[@Etheo1ify]

Dealerships hate this guy. Saving everyone huge repair bills one video at a time.

[@AliMECH]

Thanks, glad to help people, because I paid so much for cleaning fuel injector when I was in collage, no one has to do that now

[@genegoodwin8925]

I owned a used car lot for several years and cleaned many injectors, but I did it a more compilated way. I used a phone charger for my power source and I would fill the injestor with carb cleaner, but when I touched the electrical terminal I would also hit it with some air pressure (60psi) with my air hose with a nozzle tip. It worked fine, but your way is easier. I like to see this sort of thing. When I was doing this at my used car lot there was a man who worked at the local Auto Zone who owned a EXXON staion for many years and he said injectors can't be cleaned, you must replace them. Well, you and I know better. Thank you for sharing.

[@Coco-vm3uc]

You keep things simple, clear and relatable, Thank you for your awesome work!

[@AliMECH]

I appreciate that! Thanks

[@markwatson4043]

Brilliant video ! - just saved me a fortune in garage repair bills (local garage quoted £1375.00 to fix this exact problem ! !) . . Thank you so much 😀

[@AliMECH]

Glad it helped, thanks for letting me know 😀

[@erasedfromgenepool.4845]

Thank you Brother you have saved me a lot of money from a dishonest repair shop. I truly appreciate people like you.this is absolutely the best explaining video on KZbin ..you have gained another subscriber ... Peace to you Friend👍👍

[@c_magpie222]

Short,sharp straight to the point,good on you 👏

[@AliMECH]

Thanks, all my videos are like that, I don't like to waste time

[@zbrckotina]

For even better cleaning effects you should also apply the cleaner from the side of the nozzle. It helps removing dirt which is stuck inside the injector but which is too big to go out through the nozzle.

[@hadiabaya1292]

😮

[@pobinr]

Great vid. No frills & straight to the essence of diagnosis & solution

[@AliMECH]

Thanks, I don't waste time really on any of my videos

[@carlrudd1858]

I like this video. Straight to the point and complete!

[@AliMECH]

Thanks

[@abeerwasay7367]

The best of all cleaning fuel injector videos

[@rickrose2235]

Good job: That was an awesome video, I have 280k miles on my Jeep and will try this since it needs a lot of work and I know that some dust got past the air filter.

[@gregsmith2262]

Finally a simple and sensible method, thank you kind sir for sharing.

[@AliMECH]

You are welcome!

[@Mainbusfail]

Excellent video on showing an idiot like me how to clean injectors. Thank you Ali.

[@OidHunter]

Very helpful video and straightforward. I would only add you should prime the fuel rail to get rid of any air pockets after cleaning. This is easily done by removing the main HT (sparkplug) wire and turn over the engine (starter) for a few seconds

[@AliMECH]

Thanks, yes you can do that but not for so long, otherwise sprayed furl will stay in the sylinder and wash out the oil

[@divinetruth2875]

Modern vehicles prime the fuel system when the ignition is turned on. Key on, wait until you hear pump stop, key off, repeat 👍

[@AS-pu7gj]

@@divinetruth2875 is it so , does it inject the diesel just on turning the ignition ?

[@divinetruth2875]

@@AS-pu7gj No, the process does not inject any fuel or activate the injectors. This process is often referred to as "priming" the fuel system and has the effect of filling and pressurizing the fuel rail. Air remaining in the system becomes compressed by fuel pressure and naturally locates itself at the highest possible point since gasses (air) are less dense than liquids (fuel). Starting the vehicle activates the injectors as normal and the remaining air is expelled into the motor by normal operation. Performing this procedure should result in normal to slightly extended cranking times. Diesels and direct injection motors with metal lines branching off of a common rail tend to require more cranking time than vehicles with injectors directly mounted on a fuel rail and is normal. God bless brother 🙏🙌✝️😁

[@AS-pu7gj]

@@divinetruth2875 oh Thankyou so much brother 🤗🙏, God bless you too 🤗🤗

[@user-hd1qx2bd1r]

Great Video and excellent photo shots, straightforward, Thank You!!!

[@AliMECH]

Glad it was helpful

[@davidturner4639]

Good video! I ordered a couple of generic injector connectors from ebay for a few bucks since I clean injectors frequently.

[@AliMECH]

Nice 👍, thanks for watching

[@davedeatherage4902]

Yes, great explanation and saved me money by showing my self How to do the work. I'm learning Diy'er Mechanic's can't afford the shop's.

[@benicavalera2543]

since i'm lazy, i just filled a full tank v power nitro +, and hit 6k rpm several times on highway..

[@ryanpaul5604]

The ole Italian tune up

[@terrarium_adventures]

Best diy injector cleaning video! Subscribed 👍🏻

[@AliMECH]

Thanks 🙏

[@PhongNguyen-vq2jq]

Great video. Just cleaned my fuel injector camry. Thanks

[@AliMECH]

Glad it helped

[@manos84305]

Simple and usefull , Thanks mate !!!

[@AliMECH]

Glad it helped

[@buddy9200]

Excellent tutorial on how to clean injectors , most anyone can do this simple procedure. Thanks

[@AliMECH]

Glad it was helpful

[@sunilperera5553]

A marvellous job. Well done, The best ever seen very clear; short and sweet. Thank you very much.

[@AliMECH]

You're very welcome!

[@paulandrewpimentel2005]

Thank You, Man.... Great video, Great explanation.... Because of you, I am ready to clean my injectors on my truck... Great explanation!... I just subscribed

[@AliMECH]

Thanks, appreciate that

[@joewhatsup]

Thank you sir, great video and explanation!

[@AliMECH]

You are welcome!

[@dundeeecroc]

Beautiful WORK and GREAT video/tutorial!!! thanks!!

[@AliMECH]

Thanks for watching

[@pinoym371]

It is a very clear explanation and easy way to follow...thanks a lot. 🎉

[@AliMECH]

Glad it was helpful!

[@SoulFoodEqualsMusic]

You are a genious of the practical car repairs, do you know that?

[@AliMECH]

Thanks, appreciate that

[@shawnsdigginit8381]

Great video! Im about to do the same thing to my 1993 volvo 240 wagon.

[@vwfatmobile3275]

Good to see this video. It's just that easy to clean injectors. I had great luck when I did this with techron.

[@AliMECH]

Thanks for sharing

[@samuelnugent4852]

Amazing how easy you make it look thank you for value info

[@AliMECH]

You are so welcome, thanks for watching

[@NQBN]

Amazing video. Thank you. Please more videos of fixing car issues.

[@kamijoon4788]

Great Video!!! Thanks for the education

[@AliMECH]

Thanks for watching

[@jerryderamoa7515]

Best simple explaination

[@pieroroccaysj]

Saw another video in which the guy used an ultrasonic cleaner. It did a fantastic job and didn't damage any of the consumable parts.

[@AliMECH]

It's a great way to use ulrasonic cleaner, I also used it and fixed leaking fuel injector in this video kzbin.info/www/bejne/h56qaIyMeLSgmbs

[@daviddowns7552]

i love learning. this dont look too hard. thank you for demonstration video sir.✅🏁

[@AliMECH]

Thanks for watching

[@wpowerwagon]

Nice and easy thanks for your thoughts and great video

[@AliMECH]

Thanks for watching

[@BikerGirlTraveler]

Very good video! Thank you so much for sharing.

[@AliMECH]

Thanks for watching!

[@HS-vw6uz]

This guy is on other level

[@AliMECH]

Thanks 🙏

[@user-fr8bd4fy2w]

The best way of clearing injectors ❤❤

[@AliMECH]

Glad you think so!

[@CHIBA280CRV]

Fantastic informative video thanks 🙏

[@AliMECH]

Thanks

[@carlosrodrigoromero6258]

Lo intentaré es el mejor video que e visto en limpieza en casa

[@AliMECH]

Thanks 🙏🙏

[@michaeldo4338]

Thank you very much for share this clip.

[@AliMECH]

No problem, glad to help

[@Sagemeister007]

I like your mehtod! Very clever!! Thank you!

[@Doomboomoom340]

Hi perfect day thank you very much for the video love your stuff blessings apon BLESSiNGS on your life

[@AliMECH]

Thanks Denise, appreciate that, God bless you too

[@mariopalaciosvaldes8589]

Excelente video!!! felicidades y feliz Navidad!!!

[@AliMECH]

gracias igualmente

[@felicianotorres5022]

great video ALIMECH you explain very clear thanks for that you help many people like me

[@AliMECH]

Glad to hear that

[@wsmaga]

Now that was cool. Def looks pretty simple.

[@AliMECH]

Thanks for watching

[@wsmaga]

@@AliMECH you’re welcome.

[@dalemcalpine1051]

Excellent DIY instruction video.

[@AliMECH]

Glad you liked it

[@user-zo3tc6it1x]

Thank you for your time and good information jowcto clean fuel injectors. I imagined it was complucated but not that difficult.

[@AliMECH]

Glad it helped

[@randyrobison335]

Good video. Keep up the good work.

[@AliMECH]

Thanks for watching

[@emeliealegonero4043]

Pretty Cool 😮

[@AliMECH]

Thanks

[@omayaali4157]

hi , i have tried to remove the filter from the injectors but it not removed ,is cleaning at opposite position can be useful?

[@WizeChoice]

Amazing. Thank you

[@AliMECH]

Glad you liked it!

[@vanhap]

great helpful video, thank you!

[@AliMECH]

Thanks for watching

[@kellybrown1860]

right to the point great video

[@AliMECH]

Appreciate it!, I always do, no wasting time

[@ALL666s]

Much appreciated 👍

[@AliMECH]

Glad to help

[@alexgunner1882]

How do you connect the small red tube to the big hose?

[@slickdawg4634]

The best camera I’ve seen

[@AliMECH]

Thanks

[@joeyahoo4493]

How about using liquid injector cleaner by mixing it with fuel (gasoline) when we fill up fuel? Thanks.

[@samblanco5434]

I have 2 question. What kind of lube do you use for the orings ? Do you recommend cleaning the holes were the sparkplugs go ?

[@pattayperformance]

Any lube will be fine as long as it is oil based. Engine Oil, Tranny Oil or some sort of spray lube

[@AT-wl9yq]

You shouldn't need to lube port injectors. But, if you have to for some reason, use transmission assembly grease. Don't use anything else. Its the safest way to go, by far. For the spark plug holes, use a thread chaser. You can get one that's made to be used on spark plug threads. Any auto parts store should stock them. But you need to be careful. Its very easy to strip the threads on an AL head. Get a small piece of rubber fuel line. Attach a spark plug to one end, and use that to get them started. Once you are sure that the plug is going in properly, you can then use a socket to finish tightening them.

[@abodao]

Very nice clear and concise video of injector cleaning. What special tool did you use to disconnect the fuel rail from the gas line?

[@AliMECH]

Thanks, its called fuel line disconnector tool

[@insighteins1317]

Cool method!!!

[@AliMECH]

Glad you think so!

[@Bianchi77]

Nice information, thanks for sharing, like it :)

[@AliMECH]

Thank you too

[@ypeshusolomon]

Good one.. Appreciate the display.

[@AliMECH]

Thanks for watching

[@GVChannel]

So nice job!

[@AliMECH]

Thank you!

[@Diosesdepapel]

Great video .. Thanks for sharing

[@AliMECH]

Thanks for watching!

[@stephengirling7859]

Very helpful.

[@AliMECH]

Glad to hear!

[@ItsAlive111]

OMG, thank you!!!!

[@AliMECH]

Glad it was helpful

[@ZhangKevin-wr3gn]

Wow, nice Cleaner

[@AliMECH]

Thanks!

[@toniyalda4658]

Thanks for the video

[@AliMECH]

No problem!

[@Ballu12345]

Thank You Very Much

[@AliMECH]

No problem

[@darrenrendall4577]

Fantastic my friend..I shall try on my wifeys Hyundai Tuscon, & will let you know how it goes.

[@AliMECH]

That's great, yes let us know

[@michaeloconnor8631]

Thank you for this video

[@AliMECH]

My pleasure, thanks for watching

[@Official-bg1dt]

Really nice video 👍👌👌👌

[@AliMECH]

Thanks for watching

[@romanjaspe4172]

Thanks so much brother. Regards

[@AliMECH]

Always welcome

[@jimb4547]

Excellent !!

[@AliMECH]

Many thanks!

[@franciskersher8576]

Where do you get that long spray tube

[@cameronbillings7312]

Bro, amazing 👏🏼

[@AliMECH]

Thanks for watching

[@xopexindustries]

How did you make the adapter for the carb cleaner?

[@madelrocciba3875]

Great video

[@AliMECH]

Thanks for watching rocio 🙏

[@wheelhouseadventures8176]

Thanks Ali

[@mikewilson8594]

Very good video!

[@AliMECH]

Thanks

[@CalkoLouie]

Great video I enjoy it.

[@AliMECH]

Glad you enjoyed it

[@kevinwinkle8091]

Do all injectors have filters? I have a 2011 f150 5.0 and I cant find any info on what filters I would need.

[@mirzashahzad2474]

This is very good work. Think you sir

[@AliMECH]

Many thanks

[@robertlittle2356]

Hi, really good, straightforward explanation. Can this method be used on a common rail diesel? My concern is the very high fuel pressure at the rail and injectors. At rest, the pressure sits at around 3600psi. I refer to a 2008 SsangYong Rexton RX270 XVT (5 cylinder Mercedes Benz engine). Thanks for your advice and time.

[@AliMECH]

Thanks, i never tried them on diesel injectors before, i should try that too, im getting so many question about that

[@robertlittle2356]

@@AliMECH thanks Ali. I live in Australia. I'll follow you with interest. Regards

[@AliMECH]

Thanks, appreciate your support 🙏

[@rushdifaleh646]

The best explanation

[@AliMECH]

Glad you think so!

[@daviddowns7552]

question please. i want to do or have this service done,, but,, will a cleaner in gas tank help any until i get the time and $ to do this. i have some amsoil pi in my tank now. opinion please.. thank you.

[@roadstar499]

So there is no need to soak or take injectors appart,or back flush other direction? I just received one rebuilt injector and rebuild kit for the 4 injectors on my 2.5 l Nissan...on my car i will need to remove my intake manifold to get to injectors..i have those gaskets on the way..thanks for sharing

[@shoaib_ch]

Nicely Explained Video , One thing i would like to ask , how about if we clean injectors in reverse direction first , in that way filters can be cleaned and may be we dont need to remove filters and than we clean it from filter side so that injector heads also gets cleaned. What do you suggest ?

[@BillSW]

did u try this? makes sense

[@mspeir]

Thank you!

[@AliMECH]

You're welcome!

[@BrendAn_RSA]

Thank you! 👊🏻

[@AliMECH]

No problem!

[@Mars-zgblbl]

Saw the thumbnail before reading the title, thought it was a video by a urologist

[@yousuf2166]

You are creative How about installing oil catch can 3 parts in Camry if you work a ring

[@AliMECH]

Thanks, already ordered one, I will make a video about it soon

[@Doug_Hefernen]

THANK YOU!!!!!!!!

[@AliMECH]

🙏🙏