Fuel Line | Classic Tube | 1965-1966 Mustang

Bill shows you how to install a Classic Tube 3/8" Original Steel Fuel Tank to Fuel Pump Line on your 1965-1966 Mustang with a V8 Engine.
Purchase Product Here:
www.cjponyparts.com/classic-t...
The next step in our Forgotten Fastback project car is to install the Fuel Line, which will go from the tank to the pump mounts. This 3/8-inch line is originally found on the Shelby models, and will help when we plan on adding some decent horsepower to the Fastback.
To begin this installation on your 1965-1966 Mustang with a V8 Engine, remove the driver's side tire to allow for more room and then locate the route your Fuel Line will take on the underside of your Mustang. Install the grommet, begin straightening out your Fuel Line, and secure the one end to the grommet. Follow Bill's step-by-step instructions in the video to learn how to secure and straighten your entire Fuel Line.
We've also decided to install a Brake Line in the Mustang, since it shares many of the same mounting points with the Fuel Line. To run the break line, make sure the end with the 90-degrees is facing the master cylinder. Follow the instructions in the video to learn how to properly run this Line and finish up your installation of the Fuel Line.
Check out more Fuel Line parts from CJ's here:
www.cjponyparts.com/mustang-fu...
Check out more Classic Tube parts from CJ's here:
www.cjponyparts.com/classic-tu...
Subscribe to CJ Pony Parts on KZbin here:
kzbin.info_c...

[@Whammo77]

The videos are one reason I choose to purchase from CJ Pony. Their prices are in line with all other vendors, but they go out of their way to make the tutorials. Thank you!

[@michaelhuye]

Fantastic...so glad you have these. My son and I are fixing up a 66 and we have never been mechanical and these videos make us realize it is not so hard if you take your time and have patience. Love love love these videos.

[@ciennac7161]

Did this on my 66 GT and followed you step for step thanks a bunch worked out great!

[@Zerogivengarage]

I would agree with you it's not the best routing but that is how the lines were made since that's how Ford did it originally. In 1967 they moved the fuel lines to the rocker so they no longer pass under the rail.

[@vsGoliath96]

It's kinda fun to look back at this video and realize that the poor shell of a car they're working on would eventually become Project 50Thirty.

[@redlinekilla7]

would this apply to 04 mustangs as well am switching from fuel injection to carb and I need a bigger fuel line

[@ivanbussani271]

which difference exists between two pieces and one piece fuel line? for instalation? at your store there are those posibilities. thanks

[@67Mustang666]

would this work on a early 67 Mustang my gas line runs down the transmission tunnel and I want the bigger line

[@vaioskaliakoudas6388]

Will the fuel lines work w/ an efi conversion kit?

[@haluke101]

Once that drive shaft broken hits on body

[@upwardcrayon5]

I think Fords 'light bulb' was out when they 'designed' a rubber hose (that breaks down over time) as a connection between the sending unit and the fuel line. Every few years I have to replace mine and it's a job that I 'never' look forward to; especially when the gas tank is full. :(

[@thattruckguy]

what are the part numbers for the same parts but for my 67? Thank you

[@mindiseverything5036]

Do u got the cougar 302 67 fuel lines ?

[@futzer]

need a kit for my 67 that feeds a coyote gen 3 - got a product link?

[@kepaloha]

Hey Bill, has the Fastback been forgotten again? I love these series.

[@Zerogivengarage]

Not at all, we chose a different route with the car. The Forgotten Fastback became our Project 50/30

[@kepaloha]

Bill Tumas Great to hear, I will start watching that playlist Thank you for the update.

[@zlegolas14]

How different is this install on a 68' coupe? I would love to see a video of a full break line install on a 68' mustang.

[@Zerogivengarage]

Same basic install, the routing is a little different

[@q8fly.]

Nice, but its better if need install efi hoses For a fuel injection system

[@Shelby-racer]

What is the part # on the line?

[@TallStarlite]

Car lift not included!

[@HiddenBoss]

Is it just me or wouldn't it be safer if the fuel line was ran through the rail or inside the bay rather than the outside of the rail and running it under the rail?

[@upwardcrayon5]

I agree with you, who cares about 'originally', I'd take safety over it any day

[@chriskesterson2373]

1998 Ford mustang convert. Fuel line clogged

[@chriskesterson2373]

Please advise and show where filter and sock are and is fuel pump in gastank,?

[@cjponyparts]

We have a video on a gas tank install on a 96. Yes the pump is in the tank.