Fuel line repair kit you have to see

How to completely insert the plastic tube the first time you try.

[@jeffwilliams312]

Finally someone actually on the ground fixing a fuel line

[@robyost8356]

I tried using this method after a buddy of mine broke the quick connector coming outta the fuel filter, this "kit" is nothing more than a"band-aid", a VERY temporary "fix".......within 2 months, it somehow sprang a fuel leak while I was driving.....the cheap ass fuel line somehow sliid most of the way off of the metal insert, which naturally added about an inch and 1/2 of length to the line, and then it ended up getting crimped, which caused the fuel leak.....so, the money and effort saved by going this route was negated by the fact of being broke down at a traffic light in a high traffic areas and then the cost of the tow fee.....all around, just a complete half ass shortcut way of fixing the issue

[@user-ol5fh6vg9v]

Hi. Thanks a lot for getting back to me. I ended up figuring out that tool but I wanted to say thanks for the video you made on you know heating up that that fitting or insert to go. You know to push that island on and melt it on there that works really good so keep up the good work, buddy.

[@noeolmedo2154]

Hey bro, such a professional job, you deserve triple A+

[@lililnel]

If your reading this I hope it’s not to late. My problem was the 90 degree couple kept getting blown away from the pressure in hindsight it failed to lock to the fuel pump. Bought the new piece and it’s hard to get on… so remove the locking piece from your new couple and place it on your old one and would believe works like new😅

[@timgoode8278]

Havin a time with feul line repair on 94 Z28. PITA. Be sure to watch as many videos as possible. 🤯😩 All the posts are helpful

[@southernarsenal908]

Show me it doesnt leak now

[@edjacobs8876]

Had you tried the dorman shark bite fuel line connector?

[@user-ol5fh6vg9v]

Hi how did you disconnect the fuel line at the union or factory split it was on the end of the piece you were holding at the end of your video

[@alphastarcar]

Awesome tips for making the repair. Thank you!

[@ricardo7352]

Good shit and thank you sir, people like you make KZbin a better place.

[@bobedwardsjr]

I was headed back to return this POS kit when I saw your trick. Thank you very much!!

[@jdmackable]

Thanks so much for posting. I've got the same kit and was worried about getting the line on the barb.

[@LaZerMouse]

I was actually thinking of doing this but on an EVAP line but wasn’t sure and thanks to u I am sure this will work

[@redjaw69]

Thank YOU ! This really helped me on a difficult repair

[@fontainetm]

Glad I watched this before attempting this repair. Thanks for the tip

[@Superfandangoo]

I’ve been having a nightmare will try this thank you 🙏

[@hemp1958]

MY project just got a lot easier, Thanks

[@mrchief.-__-2051]

best one i seen yet

[@rdeleon0360]

Glad I found your video. Didn't know I had to do all that. Ty!🤔