Fuel Pump Replaced the EASY WAY! Suzuki King Quad 300 WON'T RUN!

[@mercman2.5]

I have realized that 2 different pumps were used on these machines, thanks for the video, going thru a really clean '92 as we speak. I did take the plastic off and yes, a royal pain in the ass, but I replaces a brake line and general cleanup for repaint. Great Vid!!!

[@kaitlynfrazier6117]

Great video helped a lot!

[@tylerc3477]

Have you ever had a problem with this four wheeler not charging the battery? I have the same one and every time I get on it, the battery is too weak and will barely turn the motor. A new battery helps for a while but does not fix the problem.

[@ToyShopRestorations]

Ya I’ve put a voltage regulator on this one. Check to see how many volts the battery is at when it’s running. It should be 13-15 volts when running. Anything outside of that range and a voltage regulator is a pretty good place to start. Only bad part is it buried and you need to take off the front rack and front plastic because it’s infront of the steering column.

[@notafakeliarortwofacedback175]

No..but I put a new voltage regular on mine..probably what's wrong with yours! Easy fix..20 bucks..it's on right side below handlebars...at neck..changed mine in 5 mins...I think my issue is bad jets..no fuel getting into carb..cleaned it out etc but same thing

[@notafakeliarortwofacedback175]

​@@ToyShopRestorationsI didn't have to do that!..just battery cover and small neck plastic.

[@Livingstoncreekgamefarm]

Hey man I lost the spring for one of the lines to the carb do you know where to get one

[@ToyShopRestorations]

Like the hose protector? You can try looking on Partzilla and see if it’s still available thru Suzuki. I’m sure it’s not expensive

[@Livingstoncreekgamefarm]

@@ToyShopRestorations it’s the spring that goes into the choke line

[@BraidonMcnemar]

What is the link that you got it from

[@ToyShopRestorations]

I got it on eBay. There’s a link in the description

[@zachdoz2923]

Hi, do you have to prime this at all? Thanks

[@ToyShopRestorations]

I honestly don’t remember. I would assume you’d have to crank it over for a hot second to let the fuel pump get the gas to the carb.

[@jerssonlara2912]

hello! Where does the fuel pump vacuum come from?

[@ToyShopRestorations]

I don’t have the wheeler anymore and I don’t remember 😅

[@GarageWorx]

I replaced the fuel pump in my 2000 king quad without removing the fender. Maybe the older ones are different.

[@ToyShopRestorations]

I was nervous at first because I’ve had to pull the plastic twice to change the voltage regulator and it’s a pain 😂

[@notafakeliarortwofacedback175]

Can it be the peck also?

[@ToyShopRestorations]

It’s possible 🤷🏻‍♂️

[@MJ7DIRULE]

Hi im new to the king quads, ive got a 98 and the engine keeps filling up with gas about every few months or so. Would you be thinking carb or can it be getting by the fuel pump? Thanks

[@ToyShopRestorations]

It could be either one I think. If the diaphragm is bad in the pump then gas could be getting into the vacuum side of the pump and filling the motor thru the pulse line.

[@Shacklersrevenge1981]

You have to leave the gas petcock on ON that fuel won’t fill the carb. The ON position is mechanical and only works when the wheeler is running. If you leave it on PRI it will fill the carb and your engine.

[@Ghostman_Ryan]

You need a new fuel float needle in the carb.

[@doonflare1514]

I replaced my old pump but it's still not giving gas fast enough, it'll run for like 30 second's then stops

[@doonflare1514]

I also recently replaced the carburator to

[@ToyShopRestorations]

If you spray carb cleaner or starting fluid in the carb when it’s about to stall will it stay running?

[@doonflare1514]

@@ToyShopRestorations I did that and it only ran like a minute longer

[@doonflare1514]

@@ToyShopRestorations I took the gas line/hose off of carb then tried turning it over and the pump only pushed out like maybe 5 drops of gas

[@adamsorell4851]

chinese carbs dont work

[@cjackfly]

Schwert. I'll try this first since my spark plug is some weird size and can't be removed atm.

[@ToyShopRestorations]

Hope you can get it going!