Fuel starvation issue solved with Bobcat T450 Skid Loader

Had multiple times where the unit would bog down while at full throttle and under load. I changed the fuel filter and back tested the lines as well as replaced the primer bulb. It ended up being crud in the fuel inlet elbow. This solved other problems we had in other loaders! So if you having stalling issues and have replaced everything else, check this!

[@bryanevans4688]

Finally, a video that gets right down to the meat and potatoes, No elaborate intro and useless Chit-Chat. Thank You! Very Informative

[@FollowTheGoodShepherd]

What is the back pressure line exactly?

[@sniffy45]

2500 dealer fix LOL, thx bud

[@rosincore]

glad I could help. I found this has been an issue with our other loaders. T590 as well

[@ronniewilliz153]

My 450 at work can not turn with out dropping rpm. If I'm sitting still an I try to turn it bogs down I'm wondering this is that problem. I won't even have anything in the bucket an I'll be on dirt or pavement an it can't turn from a dead stop I have to move it forward or backwards some an then start my turn it get annoying sometimes. Btw it's a brand new skid steer with 37 hrs on it Nice fix tho.

[@rosincore]

Check your drive belt or main hydraulic belt. Sometimes the tensioner gets loose or the belt slips. This is a common cause of that.

[@ryanmcbride7547]

I have a Mini 325 that the primer bulb keeps sucking itself dry. Same issue you think?

[@rosincore]

Sounds like it. Sometimes you can just turn the primer around to blow air into the tank which disloges any dirt. But that's a temporary fix.

[@haydenandrosky5649]

Was it starting hard ?

[@rosincore]

It would take a while to start. Once it did it would stall under any kind of load.