Fujifilm X-T3 Best Video Settings and Hacks in 4K

A quick start guide to setting up the Fujifilm X-T3 for video recording - and then some hacks and advanced tips.
#NOTSPONSORED
**********
I have not received compensation in exchange for posting this review.
If you would like to support me, members of this channel receive additional perks:
/ @maartenheilbron
Or support me directly via PayPal
www.paypal.me/...
While I do appreciate your support, no content will ever be behind a paywall.
AFFILIATE LINKS
**********
I will receive a small commission if you purchase:
Fujifilm X-T3 bhpho.to/2OiZbUi
Fujinon 16-55 bhpho.to/2ECT0GC
Fujinon MKX 18-55mm Cinema lens bhpho.to/2Eu8eNS
SanDisk SD cards bhpho.to/2El8Ndi
Atomos Ninja External Monitor/Recorder bhpho.to/2JXrkuN
Tethertools HDMI cable clamp bhpho.to/2Bpp9L7
VT 506 lapel mic bhpho.to/2JQ4QQ4
Maartech’s video production essentials:
www.bhphotovid...
www.amazon.com...
LINKS
**********
Download Fuji LUTs: www.fujifilm.co...
CREDITS
**********
Recorded at the KZbin Space in Tokyo.
ABOUT ME
**********
I do read and respond to all comments, which are moderated. If you leave a relevant question or civil comment without links (which are filtered by youtube) it will be posted, I will reply.
Spend more time with me:
WEBSITE/BLOG: maartech.com
CONTACT: maartendotheilbronatgmaildotcom
DISCLOSURE
**********
My relationship with Fujifilm Canada - in exchange for an extended loan of the Fuji X-H1, I am providing some video production support. The X-T3 is on loan for this video. They have not had the opportunity to review the content, or to see this video prior to posting. As always, I strive to provide detailed and honest content.
I am not sponsored or compensated by any manufacturer, I have not accepted payment to review this or any product. Even if a product was provided at no cost to me, I don’t allow the provider to review the script or video prior to posting.
I am compensated by Google Adwords, who place videos before and after my videos. I receive a small commission from B&H and Amazon if you purchase using the affiliate links.
Please do not allow this to influence your purchase decision. Should you wish to support me, please use the links above.
I encourage you to visit and support your local photo/video retailer.
My relationship with Fujifilm Canada - in exchange for an extended loan of the Fuji X-H1, I am providing some video production support. The X-T3 is on loan for this video. They have not had the opportunity to review the content, or to see this video prior to posting. As always, I strive to provide detailed and honest content.

[@SuperbikeSurgeryTV]

This is hands down the best instructional video available for the XT3. No fluf or over produced ego tripping, just packed full of good clear precise information. This is exactly what I was looking for. Thank you so much. Excellent work and I agree with the other comments, Fuji should employ you to make there instructional videos :)

[@MaartenHeilbron]

It's always a pleasure to read the kind words from my subscribers, thanks.

[@Sketchmee5]

Fujifilm should pay you for this priceless video!👍😍

[@MaartenHeilbron]

But then I'd have to tone down the snarky comments, and you'd think I was selling out. I prefer to stay on this side of the fence.

[@andimoraru5539]

There's a soothing element in your videos, like watching a Bob Ross painting tutorial, but different. Thank you and keep making quality videos!!

[@MaartenHeilbron]

Wow, thank you! Sadly, I've never watched a Bob Ross painting.

[@xLightcrystalx]

That's the best freaking camera tutorial I have ever seen.

[@MaartenHeilbron]

How kind of you, thanks for commenting, appreciated.

[@CraigEggleton]

Reminded me how much we miss new content from Maarten. Thankful we have the previous content so when I decided to pick up a xt3 for fun a few weeks ago I still have a pro to help set up. Many thanks.

[@MaartenHeilbron]

Always nice to read from a viewer that appreciates my content, thanks!

[@mintonbrunkhorst7070]

Just bought this camera about a month ago... Needles to say I have been completely blown away by the amount of functions that fuji has put into this body. Now i need to get a lens that will do it justice

[@MaartenHeilbron]

It is a very complex and powerful device. Try the 16-55, it's a worthy lens for this model.

[@billycullen6832]

Photojournalism as it should be! Superb Professional illustration and instruction, without doubt, THE best on KZbin, by far! Many thanks, Maarten! Please consider publishing E books which we can purchase and always have with us for reference.

[@MaartenHeilbron]

Always a pleasure to see your avatar in the comments, and as always I appreciate the kind words. Let me think about that as a concept - and thanks for the suggestion. There is an e-book version of the X-T2 settings that I published with FujiLove magazine.

[@wolframhuttemann3805]

It is possible to get a link to that e-book version of the X-T2?

[@MaartenHeilbron]

The online manuals are always easy to find just Google "(name of camera) manual pdf". The manual for the X-T2 is on this page: fujifilm-dsc.com/en/manual/x-t2/

[@negrellibruno86]

Never judge a book by its cover!!! Mr. Heilbron, let me begin by saying that I did judge the first few seconds of your video (mainly the lighting) so much that I almost didn’t continue watching, and that would have been VERY UNFORTUNATE, because this is by far one of the MOST EDUCATIONAL and KNOWLEDGEABLE videos I’ve ever watched, not just about the X-T3 but also about video and first steps into a more advanced path with color grading and such. Please forgive me for misjudging your video and accept my gratitude. A few highlights: - i watched dozens of videos about the X-T3 and they all say “you can’t lock your exposure settings in video mode in case you have to switch to stills for a couple of shots” You showed otherwise! Very important feature specially for someone like myself that have to do that in the middle of shooting. Your explanation of focus peaking and zebra was priceless. Thank you for sharing your knowledge with us. I was sad at the end of your video for 2 reasons: 1- i wish it never ended. And 2 - there are more people like myself out there and you only have 35k Views and 78k subscribers meanwhile a bunch of “know NOTHING” out there are breaking the 1 mil subscribers. I am just a huge fan of yours now and just too passionate about your video!!! Thank you

[@MaartenHeilbron]

Thanks for letting me know. The video was recorded at the KZbin Tokyo studio, and we had tough time getting both the Tokyo tower and me properly exposed. And thank you very much for your kind words, they are appreciated.

[@TMS5100]

Great explanation of F-LOG. I'll save it for situations that really need it.

[@MaartenHeilbron]

If not now, when? Thanks for your kind words, always nice to know I've provided useful information.

[@drtai1683]

I have to say this is one of the most information packed video I have ever seen regarding "how to". Other youtube channels always just chop them up in tiny pieces and most of them have 0 idea how to work at professional level.

[@MaartenHeilbron]

That's so kind of you - thanks for taking the time to comment.

[@devanand2121]

The best detailed reviewer in the planet KZbin!! Appreciate your every videos. Its most informative and relevant on subject than anything fancy. Thank You sir for all your effort and educational content.

[@MaartenHeilbron]

That's very kind, thanks for taking the time to comment, appreciated.

[@MegaFreeman17]

As a new fuji-xt3 owner comng from sony, o really learned alot in this video and still have to learn, Maarten i sincerely thank you for this video that no other youtuber has made.

[@MaartenHeilbron]

It’s a great pleasure to know that my viewers appreciate my videos, thanks for commenting.

[@tenestetubo]

This is a bit of an older clip, but the detail of information and how it was delivered, not only makes it relevant but also makes it a real pro, easy to understand and easy to follow. I wish I've could found this channel before I bought my crappy canon. But anyway, agreed on hands down to Mr. Heilbron. I immediately subscribed and added my like (I had to).

[@MaartenHeilbron]

Thanks for that! Always nice to hear from a new viewer who's found my videos worthwhile.

[@TheDavidGoldmanphoto]

Just picked up the camera today while shooting in India for a few months. Lots to absorb here but great content that I will refer to often. Thank you!

[@MaartenHeilbron]

It was a pleasure to read your kind words, always nice to hear that my content is useful and appreciated.

[@enregistreur]

We bought a X-T3 at work, after comparing it with the a7iii (thanks to your different videos about it, too), and I must say that I absolutely do not regret this purchase! I still haven't tested all the capabilities it has, video-wise, but I'm really pleased with it. Thank you for this helpful video, I will share it with my colleagues. :)

[@MaartenHeilbron]

I certainly appreciate your kind words, it's always nice to hear that I've provided helpful content. Thanks for sharing.

[@DonalMcDonnell]

I don’t know if I’ve commented before but this video has helped me so much especially regarding focus settings, thanks so much.

[@MaartenHeilbron]

I'm so glad! Always nice to know my videos are appreciated.

[@ruaangrobler3035]

This is honestly the most concise video of this nature that I have seen, and as questions pop up in my mind you dismiss them in the next moment. I don't have the camera yet but am considering switching, and I'm watching every video I can to make sure I don't make a mistake as I really do love my Nikon d750. Your clip has been incredibly insightful on all the most valuable video aspects - specifically the ease of use for focus assistance and the 48 shutter settings. These are things very few other people cover, they are all just stuck on the film simulations...which are great...but I needed more than that. Honestly remarkable. Humblest Thanks.

[@MaartenHeilbron]

How kind of you to say, thanks for your thoughtful comments, they are appreciated.

[@lindseyrecanati8080]

OOOMMMGGGGG!!!!! i rarely comment on videos like this..... but OMG was this video helpful... all these details nobody else talks about, all those little codecs and external options no one mentioned...!!! I'll have to watch it again to configure properly my cam and atamos...... thanks!!!!

[@MaartenHeilbron]

It was a pleasure to read your very kind comment, thanks for taking the time.

[@doray_photography]

A million thanks! This video is so clear and packed with information I've had to watch it a few times, and took notes. I've always been a stills photographer, but have just been hired by a charity in Vietnam to do both stills and video. I am utterly lost, but I think you may have just saved me!

[@MaartenHeilbron]

Great, always nice to hear that I've provided useful and helpful information for my viewers.

[@TheRudeNoise]

This was really helpful, thanks. A really good, no gimmicks insightful video with lots of practical tips. I'll be watching more of your content for sure. Cheers

[@MaartenHeilbron]

Thank you for your kind words, appreciated!

[@ebouwens]

I thoroughly appreciate your thoughtful and meticulously described videos.

[@MaartenHeilbron]

It was a pleasure to read your kind words, I do my best to meet both of those criteria.

[@paulasimson4939]

A vision of clarity, thank you for this! I'm a complete video novice and was able to follow along and get my XT3 all set up and ready to go. Great content.

[@MaartenHeilbron]

A pleasure to read your kind words, it's always nice to know that my videos are helpful.

[@jellehoeks7172]

What an amazing tutorial, thanks Maarten! Wrote my first comment in 4 years for this video.

[@MaartenHeilbron]

I'm so pleased to hear that you found my content useful, thanks for commenting.

[@XArtisan]

Wow, the tips in this video are incredible. You are a gentleman and a scholar.

[@MaartenHeilbron]

It's always a pleasure to read kind words from viewers who appreciate my videos.

[@WestCoast4L1f3]

2021 and the XT-3 is going strong. Excellent review thank you!

[@MaartenHeilbron]

You probably have several more good years to go.

[@VernalFilm]

Fuji I LOVE your flip SCREEN concept! They have in my opinion the best flip screen arrangement on the marked. Makes high/low photo a breeze compared to the Panny/Oly/Canon idea where you have to flip it all the way out before rotating etc which makes you miss the moment. 100% cudos to Fuji here. This vlogging-thingy is just for a few users compared to the large amount of photographers out there.

[@MaartenHeilbron]

Hehe, thanks for sharing your thoughts.

[@jonartscc968]

Wow, this was incredibly professional and informative. Thanks a lot Maarten! Can't imagine how one could dislike a video like this.

[@MaartenHeilbron]

Thank you, it was a pleasure to read your kind words. I'm an acquired taste.

[@porkchops-tube]

Great video, the Dynamic Range 400 tip was something I hadn't counted on in my learning, so it was really great to hear about that! Thanks a lot! :)

[@MaartenHeilbron]

Glad it was helpful! Thanks for taking the time to comment.

[@ScottBookG4]

Thanks for the tips! I'm subscribing. Watched 13 minutes of this one and had to stop for the night, but got a lot out of it, even for my X-T30. Thank you.

[@MaartenHeilbron]

Always nice to know my videos are appreciated, thanks for commenting.

[@garden_hooligan]

Thank you, thank you. I recently got an X-T3 and this was the video I was looking for ... clear and concise instructions.

[@MaartenHeilbron]

Glad it was helpful! Thanks for your kind words.

[@BlaxkNobility]

Professionalism at it’s very best superb.

[@MaartenHeilbron]

Thanks for your very kind words.

[@JenR1215]

thanks so much for this video. I'm new to fujifilm, mirrorless, and cameras with this type of technology. i had my settings so messed up and didn't have a clue how to fix them!

[@MaartenHeilbron]

Always nice to know that my videos are useful and appreciated. Thanks for your kind words.

[@cb000036]

I was searching for a tutorial for recording video with the X-T3. This did the trick. Thanks!

[@MaartenHeilbron]

So glad you found my video - and that you found it useful, thanks for taking the time to comment and the kind words.

[@CrunchyrollUSA]

I'm a little confused by your lighting choices, but this video is phenomenal.

[@MaartenHeilbron]

This was not the ideal setting. We wanted the Tokyo tower in the background, and got locked to that idea even when we couldn't really light it properly. Otherwise, thanks for the kind words.

[@aerofart]

Great show, Maarten. You hit on all the salient points when it comes to shooting video with the XT-3 and video in general, some of which I had to learn the hard way (such as how to get to exposure settings that fall between the manual dial settings, for example). This video is a true crash course and will accomplish exactly what you intended it to do - get someone who is unfamiliar with the camera up and running quickly.

[@MaartenHeilbron]

That's very kind of you to say - thanks for understanding exactly what I intend to do with my videos.

[@MrEmosewa101]

a much appreciated and informative breakdown. I'm getting my xt3 tomorrow. this is going to help a lot. thank you

[@MaartenHeilbron]

Always nice to hear that my content is appreciated, thanks for commenting.

[@AndrewGoodCamera]

Extremely succinct and valuable, as always Maarten. Thanks for your work on this. Would love to see a quick video on how you hide your mic in your glasses sometime.

[@MaartenHeilbron]

Thanks for the kind words - I always try to be succinct. It's really very simple, I just tape the mic using electrical tape. The mic is just inside the arm, then taped again at the end and then you can usually see the cable going behind my ear.

[@jamesclark1152]

Thank you Maarten for a superb illustration of the XT3 video settings. I'm new to video and your extensive and comprehensive tutorial is the best. Many thanks

[@MaartenHeilbron]

Always nice to hear from a viewer who's enjoyed my video.

[@sirjohnandrewg]

Maarten Hi! As always your video helped me a lot to get to know more - understanding a great camera like fujifilm Xt3. Still watching other videos as I try to master this camera before I go out for a major shooting activity. Again thanks, may you have a happy and blessed new year.

[@MaartenHeilbron]

Thank you for your kind words and wishes, it's always nice to know i've been helpful.

[@may-tecmedia3432]

Once again, fantastic informative video with no BS just helpful information and honest opinions. Thanks for your constant help.

[@MaartenHeilbron]

That's very kind of you to say, thanks for taking the time to comment.

[@BarcelonaPhotographer]

Sir, this is the second video I see from you and I really love your way to educate and help us as a community. 🙏🔝🔝🔝

[@MaartenHeilbron]

Thanks, I appreciate your kind words. Please watch more!

[@NotProfane]

You are amazing! Thanks for this great starter video!

[@MaartenHeilbron]

That's very kind, thanks for taking the time to comment.

[@ksnmurthy4476]

It’s an extensive tutorial with full information. Thanks 🙏🏽 can I use the same settings for my XT4 camera? How to record video with 70-300 Fuji lens? Any special settings required?

[@MaartenHeilbron]

These settings will work for the X-T4 also. No sure that’s a great lens for video, but same settings - unless there’s some specific situation.

[@Mark-xk1ec]

Maarten - Another example of an excellent review, well worth watching and very informative - I also wish that I was on that beach featured in the video (if you ever need anyone to carry your cases next time, I'm your man)! Thanks very much to both of you for the Postcard from Tokyo - very kind and thoughtful. Look after yourself both and keep the great reviews coming - until the next time. Regards Mark

[@MaartenHeilbron]

Thanks for your kind words. Yes, there are lovely beaches in Thailand, and I'll consider your kind offer for the next trip.

[@phillipchin4997]

thank you for this.. it greatly helped me. there were a few parts where there were no video, just the blank youtube wallpaper. it would be good if you updated it with the footage.

[@MaartenHeilbron]

Those blank parts are not part of the video - maybe you should check your connection?

[@spikemarble3785]

I can't tell you how many times I've referenced this video. Thanks so much!

[@MaartenHeilbron]

That's very kind of you to say, thanks for commenting.

[@kcbates1761]

Thank you for this video Maarten. You truly are a gentleman, scholar and blessing when it comes to your tutorials. Wishing you the very best in 2020 and beyond my friend! 👍 & Sub'd

[@MaartenHeilbron]

Thank you. It was a pleasure to read your kind words.

[@lights_films]

Best video review for XT3 ever!!

[@MaartenHeilbron]

Wow, thanks!!

[@punkrachmaninoff]

Quite frankly this is the best video pertaining to the Fuji X-T3 on KZbin. Wishing now that I had a similar video for the Sony PXW-FS7 the first time I rented one. Thank you so much for this - it released a tremendous amount of stress - I am buying the camera tomorrow for documentary filmmaking and the occasional sojourn into stills photography. If this has already been addressed elsewhere online i am not sure, but with respect to overheating issues (if you don't mind), I have a two-part question: i) When recording with an Atomos externally, is there a substantial reduction in the risk of overheating? ii) Does anyone have any controlled data on overheating times on the Fuji X-T3 while using an external recorder at various settings, so as to be safe?

[@MaartenHeilbron]

A pleasure to read your kind words, thanks. I would not be overly worried about overheating for the X-T3, unless you are recording in a hot environment (and in that case, any camera will be challenged). There is a reduction in the risk, but again, with high external temperatures this risk is not eliminated. I have not seen these kinds of controlled tests, and as each situation is different, they can't really be applied to real world. I can't find any reports of videographers complaining about overheating. If I were you I'd put these issues to rest.

[@knwn_knwns]

Such a great rundown, Maarten. Thank you

[@MaartenHeilbron]

Glad you enjoyed it! Your kind words are appreciated.

[@SalesGeniuses]

Many thanks for making this helpful videos with tips and hacks for T-3 users. Please make more, we'll be sure to subscribe and share ur videos.

[@MaartenHeilbron]

I appreciate your kind words, thanks. You'll find more tips in my X-T3 review. kzbin.info/www/bejne/jYm7aZSZrN6Ehq8 And I am working on an X-T3 travel tips video.

[@djlive408]

Dam I had no idea that plugging the charger for the grip will work while shooting, thank you for that useful tip! The whole video was great!

[@MaartenHeilbron]

Thanks, always good to know I've provided at least one useful tip.

[@beckysherburn3218]

The best tutorial on KZbin! 🙌

[@MaartenHeilbron]

What a pleasure to read your kind words, thanks for taking the time to comment and emoji.

[@TechFi-te3ik]

Thank you so much! What a wonderful, detailed and useful video!

[@MaartenHeilbron]

A pleasure to read you very kind words, thanks!!

[@mmallay]

Always the most informative content! Thx Maarten!

[@MaartenHeilbron]

A pleasure to read your kind words, appreciated with thanks.

[@FireRangerTom]

As a new Fuji owner I’m very happy to have these great videos to learn from, Thankyou! 😁

[@MaartenHeilbron]

It was a pleasure to read your kind words, thanks!

[@ericadams6608]

Thank you Maarten, that was very helpful and no doubt saved me a lot of time. Cheers

[@MaartenHeilbron]

That's very kind of you to say, and that's exactly what I'm going for. Thanks.

[@jcmc3445]

What an excellent video sir. Thank you for taking the time to make this content and share it.

[@MaartenHeilbron]

That's very kind of you to say - and it is entirely my pleasure.

[@donsylvester5275]

Very helpful for we beginners. Questions: When I switch to Movie Mode why do I need to change from AF-S to AF-C ... it seems to do that automatically? Can you pls consider doing a video on the Sports Finder Mode ... that's not well explained anywhere. Your showing examples is better than trying to read about it.

[@MaartenHeilbron]

Thanks, I appreciate the kind words. Yes, it does, but it's helpful to set the switch to remember that's where you are. I do demo sports finder mode in my review, which you might find interesting. kzbin.info/www/bejne/jYm7aZSZrN6Ehq8

[@donsylvester5275]

@@MaartenHeilbron Brilliant rundown on the X-T3 you pointed me to Maarten. So much helpful info. Example: how to use the Wide Focus re 'set focus point to where item enters the screen'. It is hard to find that sort of knowledge. Would be wonderful to see you do more like that? Another Question: Lots of Shutter choices ... what to use? When? How to minimize changes? Thanks.

[@MaartenHeilbron]

Thanks again for the kind words. I do my best to be honest and detailed. For shutter, use the mechanical shutter unless you have a specific need. I'll think about that as a topic, as more cameras are adding this kind of control, but the reasons to use alternate shutter modes silence the shutter, speed the shutter) are few and finding situations to demonstrate the impact and effects are hard to find.

[@donsylvester5275]

@@MaartenHeilbron Thx for direction on shutter. Will go MS only right now. Confusing because I want camera to choose best for situation ... but it actually doesn't. Seems the Sports Finder will only actuate if on MS? The shutter choices and operational consequences are not clear; setting to all 3 with idea of "let camera make best choice" negates at least that function ... not intuitive. Thx Maarten ... you're a big help to ordinary folks like me.

[@MaartenHeilbron]

Always happy to help. Right, limitations. SportsFinder only works with mechanical, Pre-shot only with electronic ... I found that frustrating (and neither as useful/usable as I'd have liked). Right now my method is to change to one of the others only when necessary.

[@rajneessingh222]

Killer stuff sir! Just got my new XT3 and 10 bit internal f-log results are insane. Can you pls go a little more on the when-to and when-not-to go for f-log and the dynamic range redistribution.

[@MaartenHeilbron]

It's simple - don't use F-log unless the dynamic range is more than 8 stops. If it is, first try to fix that, and if it absolutely can't be fixed, use F-Log. Either way, you will have to reduce the dynamic range in editing to about 8 stops, as nearly all displays (for now anyway) support an 8 (or so) bit range. The (partial) solution is to use HLG, so that the displays that do support it can take advantage of the higher dynamic range.

[@rajneessingh222]

@@MaartenHeilbron display shouldn't be a problem, coz I've an Eizo 10 bit grading monitor...what I'm looking for is good dynamic range in images and the log results (after grading) almost always beats the eterna results. Also, the 10-12 bit footages definitely do look better even on 8 bit screens. So I just don't see why I shouldn't be shooting log all the time.

[@MaartenHeilbron]

@@rajneessingh222 While I applaud your choice of monitor, you must also consider your audience, who don't have similar quality viewing equipment.

[@rajneessingh222]

@@MaartenHeilbron What you are saying is ideally correct, but practically I don't see this as a limitation. Last video I edited was 16 bit and it looks phenomenal even on small screens. Same for a GH5 10 bit vs 8 bit video.

[@MaartenHeilbron]

@@rajneessingh222 Thanks, but I frankly no longer have any idea what you meant from your original comment - you seem mohave quite enough experience to answer the question.

[@olatzbarna4459]

Very happy to find so amazing and clear content about the Fujifilm X-T3. I have a question about. When I record in H265 I can not import the files to Premiere 2019 and I have to convert the codec to H 264. How can I solve this problem? Thanks in advance

[@MaartenHeilbron]

I wish I could help, I use FCPX and have had no issues. I'd suggest you do a little research with Google - I found several useful explanations.

[@antonmarkin]

Fujifilm 16-55 f2.8 LM lens is great for video! Appreciate your detailed review!

[@MaartenHeilbron]

Agreed, and thank you for the kind words.

[@RyanRuark]

Excellent walk-through. Thanks so much for putting this together!

[@MaartenHeilbron]

I appreciate your kind words, thanks for commenting.

[@atilla1950]

Perfect for all us Fuji Video Shooters. Thank you Maarten!

[@MaartenHeilbron]

Always nice to know my videos have found their intended viewers. Thanks for the kind words.

[@edwardgreenberg8298]

Excellent video but I've run into an issue that I can't seem to explain. I set my camera as you recommended but shutter spped won't change. It stays at 120. Also, the compensation control won;'t control the compensation It stays at about 1.5 overexposed. Was is going on. I am about to take my first video of a family vacation so I would like o know what is going before I leave. By the way I moved noiseless shooting to my menu which simplifies things for me. Thanks in advance.

[@MaartenHeilbron]

Possibly you've accidentally set the frame rate to 120, which doesn't allow a slower shutter. Have you tried adjusting the ISO instead of EV?

Thanks for this useful tutorial. For outdoor conditions, let's say in a bright sunny day, we can't set shutter speed to 1/60 will it be a problem for video frames? I mean is there a calculation constraint in video frame rate and shutter speed, a bit confused will appreciate if you could answer thanks!

[@MaartenHeilbron]

In sunny conditions you'll need an ND filter to reduce the light enough so that you can maintain the shutter at 1/60. 3-5 stops should do it.

Maarten Heilbron actually what I mean lets say I do not have ND filter but set 1/4000 shutter speed so can it cause problem at video smoothness at 60 frames video?

[@Dickeywood43081]

thank you so very much for making this very informative video. I am just getting into making videos and this is so helpful. I also find your reviews to be the best as they are very fair and your not a fan boy!

[@MaartenHeilbron]

It was a pleasure to read your kind words, thanks for taking the time to comment.

[@fortifiedagency]

Exactly what I was looking for. Thanks Maarten!

[@MaartenHeilbron]

Always nice to know my videos are useful and appreciated, thanks!!

[@sabusinessguru]

Great review!... Hopefully by the time I pull the trigger and buy the XT3 your videos will have trained me well. One thing I have not been able to determine from any XT3 review video is when using an external recorder (Atomos) can you confirm two things. When filming video in 4K DCI 60P, does it still crop in the sensor when sending over HDMI to the Atomos? Also, what is the maximum bitrate and supported codec when sending 4K DCI 60P over HDMI to the Atomos? Keep up the great reviews!

[@MaartenHeilbron]

Thanks, I appreciate the kind words. The same image is sent to the HDMI out as is recorded on the SD card. The supported bit rates and codecs are selected and dependent on the external recorder. The camera outputs 4K 60p 4:2:2 10 bit.

[@wolframhuttemann3805]

Hi Maarten, now I saw this instructional video again and again and everytime I learned a bit more. Thank You !!! Every time when I see a notice in my e-Mail, that You produced a new video, the day becomes a sunny day. You mentioned the better quality of the MKX lenses. Could You please comment the quality of the XF 16-55/2,8 in comparison to the MKX 16-55/2,9 ? During travelling abroad 70% of my pictures are stills and 30% videos. In video mode I don't usually use zooming while recording.

[@MaartenHeilbron]

Thank you, always nice to hear from a viewer who enjoys my channel, appreciated. Unless you're doing 100% video work for demanding clients, the MKX lens is overkill. The 16-55 is a great all around lens, and it's what I use.

[@kadeksriandari6214]

Great information, but i can’t find PAL and NTSC setting in my XT-3 ..need suggestions please

[@MaartenHeilbron]

Why do you need this setting? What are you trying to do? You can simply select the frame rate you want from the movie settings menu. As for outputting to a TV set, PAL and NTSC are not issues for HDMI.

[@kadeksriandari6214]

ok, because i was using other brand before which is have those setting, i tough will be available for fuji as well, but thanks for your help Mr.Heilbron...🙏🏻

[@MaartenHeilbron]

@@kadeksriandari6214 It's no longer needed, always happy to help.

[@torphotographic2888]

Thanks Maarten, I enjoyed the fast pace that your video provided. I'm am experienced stills shooter wanting to do more video so I was able to keep up with your settings instantly. It's interesting that many reviewers of the X-T3 rave about the video capabilities (quite rightly) but give us the impression that we should be shooting this camera at warp speed, but in the real world these are not necessarily the best settings for many of us, even the pros. I have spent hours researching gimbals for the X-T3 Fuji cameras and am keen on the Moza Air 2 but the weight of this gimbal negates the reasons why I switched to mirrorless? For the moment I am not going to use an external recorder so require the X-T3 screen free of motor mechanisms. I would appreciate your input on this? Yes of course I subscribed. :)

[@MaartenHeilbron]

Thanks for the kind words, and your subscription, appreciated. I agree, if you're producing for youtube or other online distribution, the X-T3's high end settings are more than what's needed (and fill up memory cards super fast!) I'm not sure what your question might be ... what is "screen free of motor mechanisms"? The Moza Air (or the Ronin-S, which I would recommend) are indeed heavier devices, but they provide functionality that no stills/video hybrid can match. If that's what you need, it's much, much lighter than the steadicam rigs that they replace.

[@MrLiamCotter]

This is phenomenal, thank you. Although, with my XT30 through a external device (Blackmagic Mini) direct into OBS, there seems to be no way around a '4k Recording' symbol during recording. How on earth would I ensure a clean output??

[@MaartenHeilbron]

That symbol is not coming from the camera. Maybe the Blackmagic. Does it have a setting to label an input? Unlabel it.

[@MrLiamCotter]

@@MaartenHeilbron Thanks for getting back to me... fixed. Quite simply, I was recording through OBS *whilst* recording simultaneously through cam. Quite the double fail there, but it' solved a separate issue for me also. Keep up the great content!

[@MaartenHeilbron]

@@MrLiamCotter Always happy to help.

[@everymomentischance]

i've learned a lot from your youtube. you are great teacher for me. thx always

[@MaartenHeilbron]

Thank you, that's very kind.

[@FawnandEvon]

Been running your videos all night. They must be well loaded because my tablet didn’t get stuck at all!

[@MaartenHeilbron]

Nice!!!

[@dejib.3930]

the best tutorial on xt3 video .

[@MaartenHeilbron]

Thanks, I appreciate your kind words.

[@tondilo6018]

Is it necessary to change Your recommended settings because of SW version 4.00 ? I learned so much looking Your videos. Thanks a lot.

[@MaartenHeilbron]

I don't think so, is there something that seems amiss? Thanks for your kind words.

[@DennisBloodnokPhotographyVideo]

Another great video with lots of useful information.

[@MaartenHeilbron]

Thanks, always nice to hear from a satisfied viewer.

[@alfiolora3446]

Thank you for your your video, I am having a issue with the setup on mine. I CANNOT adjust the iso, shutter and aperture with the knobs and wheel, The only thing I have is a touch command on the screen that shows the video icon and the work "set", I touch that and on the screen takes me to the options to adjust. I don't want that, I want to adjust with the knobs. Also, the iso ONLY goes as low as 600, that is nuts, Any answers? Thanks so much

[@MaartenHeilbron]

I appreciate your kind words. The setting "Movie Silent Control" (not on by default) bypasses all the physical controls so that you can make silent on-screen setting adjustments. I thought I explained this in the video. When you select FLog, the lowest available ISO is 600.Fujifilm's minimum ISO for Log is lower than most.

[@alfiolora3446]

@@MaartenHeilbron Thank you so MUCH Maarten, I was going nuts !!!!!

[@MaartenHeilbron]

@@alfiolora3446 Always happy to help.

[@mjstowe1]

At the beginning you say AFS is not available in video mode. It actually is. Was that added later on after this video? Only if you turn off eye/face detection though. I am new to the X-T3 so I do not know what the firmware in April brought in.

[@MaartenHeilbron]

Yes, now it actually is.

[@jeremyodonnell6731]

Awesome video, so glad i found it, thank you for making it!!

[@MaartenHeilbron]

Glad you liked it! I appreciate your kind words.

[@raredreamfootage]

Can you set the picture profiles separately for the internal recording and external recording?

[@MaartenHeilbron]

You cannot. You can set the separately for stills and video though.

[@tlcassel]

Thank you for this. Does the high speed recording (120fps etc) still shoot at 4K 10 bit or is it only available at 1080p?

[@MaartenHeilbron]

Only 1080. It’s always my pleasure, thanks for your kind words.

[@3argoubVlogs]

all I can say this what call it video need to see in KZbin thank you so much ,its really helpful and pro video

[@MaartenHeilbron]

Thanks. A pleasure to read your kind words.

[@RobTheCarSpotter]

Great in-depth videos. Honestly I would say these are my favourite on KZbin! Quick question. In 'Movie Silent Control' mode, can the list of options (ISO, shutter speed, etc.) be navigated with the arrow buttons/AF joystick? Or are you restricted to using the touchscreen to swipe through these options?

[@MaartenHeilbron]

Thanks for the kind words. That is an excellent point I should have made or demonstrated - yes, you can use the joystick to navigate, but you must use touch to access the menu. While the mode (in and out of silent) can be set to a function key, activating the menu cannot (as far as I can tell anyway).

[@RobTheCarSpotter]

@@MaartenHeilbron Thanks for that. Well as long as I can use the joystick to navigate the options that sounds good to me, since I always prefer to use manual controls rather than touchscreen gestures. Looking forward to getting my X-T3 in a few weeks time as a replacement for my Canon 80D!

[@MaartenHeilbron]

Using the silent menu, touch works well. Less so for the swipe gestures.

[@Kai-P]

Incredible good videos so full of information, keep it up!

[@MaartenHeilbron]

I appreciate your kind words, thanks for taking the time to comment.

[@afisher555]

Thank you for an informative video. I would like to use my XT2 for recording short introductions for online lessons, (due to this nasty Virus disrupting teaching) Can you suggest a suitable microphone, as I will be perched on a chair in my living room and just chatting, not moving, maybe a 1 m away from my camera. Thank you. Any cheaper satisfactory ones around 50 dollars or so? A clip on one or a microphone? The quality has to be good enough to get my message across. Not super duper quality but better than my laptop video/mic. Any tips appreciated.

[@MaartenHeilbron]

I don't know what prices are like where you are, and in my mind good quality mics under U$100. don't really exist. However, any electronics or camera store will have options for both on-camera shotgun mics as well as lapel mics to clip onto your shirt, likely in your price range.

[@milgeekmedia]

Learned a few things for my XT-2 here as well! Thanks.

[@MaartenHeilbron]

Thanks for your kind words, always nice to know that my videos are helpful.

[@sko19sko]

Thanks for all the videos, Maarten!

[@MaartenHeilbron]

A pleasure to read your kind words, thanks for commenting.

[@elkawash]

Thank you so much. What is the highest usable ISO?

[@MaartenHeilbron]

I appreciate your kind words, thanks! That probably depends on your standards, I’m good to about 6400, which I find to be better than average in 2018.

[@overkillonslash]

Great, easily understandable and detailed explanation! I have a question : I need to combine 2 videos from 2 different cameras in to 1 clip. One is 4k 50fps and one is fullhd 25fps . Should i edit in a 50fps timeline or a 25 fps timeline, which will look smoother? or should i instead reshoot the 4k in 25 fps ?

[@MaartenHeilbron]

Thanks for the kind words, always appreciated. I would produce at 1080/25. Most capable NLEs will conform the larger res to the smaller for output. Remember that because you can zoom the 4K clip to 200% without loss of quality, enabling you to zoom and pan on that footage. If you do need final output as 4K, and you can arrange to reshoot, then that is also an option.

[@overkillonslash]

@@MaartenHeilbron okay so produce at 1080p got it , but at 50fps or at 25 fps? do i follow the clip with the lowest fps?

[@MaartenHeilbron]

In general, yes. 25fps, if that's the frame rate in the lower rate clip.

[@SeanChandler067]

nice - just got an X-T3 - thanks for the tips and hacks

[@MaartenHeilbron]

Always nice to know my videos are useful, thanks for commenting.

[@Maros_Mari]

Many thanks for helpful video. I have a couple of questions/things I would like to cross check-clarify. Could you please advise why 17:9 is better than 16:9 and your the choice of 24p over 23.98p when setting for movie production? Also when you mention zebra usage, I understand it indicates blown highlights/over 100 on waveform/, then just to clarify, you say its good to set at 70% to see good indication for skin tones - then you set at 11.08 iso higher, loosing more details in skin on your talent. I do not have much previous experience working with zebra, how do you properly expose for skin tone with zebra? Is it best not to see any blown areas or some or what are your thoughts on that? Many thanks for your answer and high quality videos. I always learn new useful info and it helps alot. I would love to get into more professional movie production work with fuji XT series and would love to hear not only about best way to setup but also some background info to understand the choices behind.

[@MaartenHeilbron]

I appreciate your kind words. The aspect ration for most cinema production is 17x9. 16x9 is used for video/TV as that's the standard 4K resolution of TV screens. Film standardized on 24 frames per second, and if your production is to be displayed in a cinema environment, where the projector displays 24 frames per second, that should be your preference to minimize processing and lost or added frames. You should aim to expose the skin of an average light skinned person at 70 percent. To do that, set the zebra for 70, and set the exposure so the the skin is showing stripes. That however should be set in conjunction with the overall exposure, which, if you're producing for broadcast, is very fussy about 100%. There's no harm in blowing out highlights, if that serves the production, however, it should still be clipped (possibly in post if required) to 100 IRE units on a waveform. I don't usually explain, as I feel that the viewers for whom these videos are designed just want to get on with their production. Hope this helps.

[@Maros_Mari]

Thank you Maarten, I do appreciate the reply and the info provided. First, I wanted to say, I learn a lot from your reviews and you either got talent or spend sufficient time in preparation in order to make the videos that flow, are to the point, give the info needed in a way that people can understand. It really looks like you do that with ease, but I believe there is some good prep work and thinking behind it. That said, I would love to learn more - hear more about the things regarding filmmaking, things like right way to expose with zebras for skintone /you explained/ or other useful things as standard formats, etc. I know this can be googled/learnt on other channels - or in other ways, but just a thought for you, if in the future you would consider making a series or some videos that would cover useful things for filmmaking - just a thought and suggestion that I would and maybe more people love to hear more on those topics from you. Thank you and all the best. M.

[@MaartenHeilbron]

Always happy to help. I do prepare - first research and then writing. I work from a script and use a teleprompter on camera. That is a good suggestion - I should distill all that info into a more general film-making video.

[@JamesStevensonPhoto]

Maarten, this is a very helpful and clear guide, thank you. I have one question; when using the HDMI out to monitor on a separate screen, audio monitoring via the headphones jack is disabled and seems to br re-routed through the HDMI to the monitor. This is less than ideal and different to what I've experienced on other cameras - do you know if there's a way to continue to monitor audio via the headphone jack whilst using an external monitor? Appreciate you taking the time to make these guides, very helpful. Cheers!

[@MaartenHeilbron]

Thank you, your kind words are gratefully appreciated. That seems to be normal behaviour to me, and although I sympathize with what appears to be non-standard behaviour to you, the solution - plugging the headphones into the monitor (which I do) seems a suitable solution.

[@JamesStevensonPhoto]

Thank you for the fast reply! I think it's likely me getting used to moving into video from photography where my roots were, and getting used to the small things that can trip you up between systems. On this particular shoot I brought my X-T3 to run alongside the crew's Sony FS5 and A7sII cameras, and spent some time trying to figure out why we couldn't monitor a hot-shoe mounted shotgun mic before realising the HDMI port took the audio to the TV monitor. Definitely good to know and yes, monitoring audio from via the monitor (a TV in this case) would have been the way to go. THanks again!

[@MaartenHeilbron]

Always happy to help, I sympathize, there are so many details to consider with video.

[@JamesStevensonPhoto]

Indeed right? Thank you, I'm watching some of your other videos right now. Subbed and following, hope you keep sharing!

[@MaartenHeilbron]

Thanks, always appreciate kind words from my viewers - and welcome, always nice to have another subscriber.

[@MartinBeek]

Hi there. I also use the Fuji X-t3 together with the Atomos Ninja V recorder. I have the following question. If I want to record from the Fuji, can I do so directly from the live view, without pressing the camera's start button, our do you recommend to always start the camera's recording? In other words, is there extra processing going on in the camera after putting the X-t3 in record mode that benefits the image quality or stability when recording externally? Thanks and kind regards, Martin Beek.

[@MaartenHeilbron]

The output quality remains the same, I don't see any advantage (other than ease of use) in using one over the other.

[@JonathanSlatter]

Helpful video - thanks. I'm thinking of getting this camera. You mentioned a better cinematic lens for shooting video with this cam rather than the stock lens. What would you suggest for stock studio shots please? Thanks

[@MaartenHeilbron]

I appreciate the kind words. Fujifilm makes a couple of excellent cinema lenses - kzbin.info/www/bejne/i4PEhZd5YpaAiaM If those are beyond your budget, I shoot most of my content with the 16-55 F2.8. It's not par focal as such, but not bad.

[@paulszilard1685]

Excellent! At 5:20 you advise to set ISO to Auto, but at 5:27 you say Auto ISO is not available. Please explain. Thanks,

[@MaartenHeilbron]

Thanks, i appreciate the kind word. Sorry about the confusion. AutoISO is available, but you can't set the AutoISO settings as you can in stills mode.

[@JuanKis]

Thank you so much for your video, it was really helpful. Why I cannot shoot with ISO under 640? It's a limitation of the camera or I'm doing something wrong?

[@MaartenHeilbron]

You have the dynamic range set to 400, which forces a minimum ISO of 640. Auto will enable all ISOs.

[@JuanKis]

@@MaartenHeilbron Thank you Maarten! I see the setting for photos and video are different, I have stills on DR Auto and you were right, I had 400 for video. There is no Auto for video, so I changed to DR100 and I could go to any ISO. Again, thank you soooooo much!

[@MaartenHeilbron]

Always happy to help, thanks for the kind words.

[@williamham9961]

Hello Maarten, Thank you for your great videos. I set my XT3 up for video as you suggested. But Lr will not download the files. Nor will my windows 10 video downloader. What is the solution, if you happen to have an answer to that. Thank you very much. BHam

[@MaartenHeilbron]

I don't use windows, so can't be much help. Fujifilm files don't typically have problems. I copy them to a hard drive first, then retrieve them from the folder. Although I don't import the video files into LR, they're displayed and available.

[@williamham9961]

Thank you so much for taking the time to reply. Cheers, B

[@duongly]

This is excellent! Thank you!

[@MaartenHeilbron]

So nice to read that viewers appreciate my content - thanks for commenting.