Fujimi: Ferrari 599 GTB Fiorano Part 1

[@keannemarkespinosa329]

That brown goes so well with that 599

[@ggj1987]

This colour is a real surprise! Looking forward to the end result!

[@picax8398]

Can't wait to see the results of this build! Love the videos tom!

[@BennyCFD]

Man.... you are such a prolific builder. Can you make a video of your collection. Thanks

[@racnc1]

BennyCFD if you go through his videos file you will see the videos of his collection..

[@christosaugustis9450]

Yes but he has made a lot of models since then

[@billy6487]

I know you left links to spray booths before but, if I remember yours you sort of custom built. When you are painting are you in a garage, patio Etc... My biggest concern is dust during and after spraying. What have you done to help reduce dust when you spray ?

[@TheScalemodelingChannel]

I spray in the attic with the washer and dryer. So prettymuch nothing at all as far as dust prevention for the room

[@brk8841]

Hello. Which noozle do you use ? I will buy the airbrush but, should i buy it solo with only 0.4 noozle or with 0.2 together as 2 in 1 package? Which one do you prefer?

[@TheScalemodelingChannel]

0,4

[@oharrellcoins5553]

That was a nice ass paint job bra. What kind of clear is that.?

[@rajaramsivasankar6864]

Do you keep the body in the extractor with it switched on when you let it sit and dry between coats to prevent dust settling on the wet primer/paint?

[@TheScalemodelingChannel]

Sometimes, yes. Depends if i have more parts to paint. Then i just set it asside

[@borisvbrknex]

Looked better without the clearcoat, I like the matte colour

[@nikifalcon]

RealBorisBoef BM's if you're a ricer then you like matte finishes

[@robertovisentin1112]

Do you thin the primer? I must add some tamiya lacquer thinner to get a nice finish. Like 1:1. Thanks

[@TheScalemodelingChannel]

Nope. Zero is pre thinned

[@robertovisentin1112]

Lucky you. Mine went down like sandpaper @20psi. Thanks!

[@michaelkeogh8454]

A color James May might choose.

[@nikifalcon]

Michael Keogh because it's a good color if done right

[@crossbowhunter9118]

how can i tell wat lines in the modle needs to be their and which cant be their for example mold lines

[@IILego_BatmanII]

A Brown Ferrari, that's interesting, nice choice.

[@crossbowhunter9118]

I got a question I am doing a old car model and when I paint any of my models the paint when applied is water like I am useing the water souble paint not the other stuff I am useing a brush to apply it what does that mean it is like water like paint when applied one brush stroke u can still see the white of the plastic model does that mean it is not shaken enough or is it cuz I don’t prime my parts plz help

[@TheScalemodelingChannel]

The paint is not thick enough. Or needs more then 1 coat to cover

[@crossbowhunter9118]

The Scalemodeling Channel could it be it not mixed well how do u like your air brushes which one do u recommend over the other I am thinking of getting one would that mean I would have to buy different paint or wat which brand do u recommend

[@fetthunderdome]

Which pressure do you spray diamond finish clear coat at?

[@TheScalemodelingChannel]

Its all in the description

[@bR44Nor]

If you would remove the paint (for re-painting). How you would do it? Sanding paper?

[@TheScalemodelingChannel]

Isopropyl alcohol(ipa) and then sandpaper once most of the paint has been removed

[@MAN394631]

i would use Dowanol, thats a great product, available in e-bay

[@bR44Nor]

thanks a lot, guys

[@Advection357]

I like the painting part :3

[@christosaugustis9450]

That is a very unusual color for a FERRARI and ia like it😁😂

[@ichbinverloren31]

i want to make models but which model should i start with?

[@TheScalemodelingChannel]

Wichever one you want bud. Thats the beaty of it

[@klonik79]

interesting choice of color, but even with that nice gloss it makes model look dull, almost featureless. From PooWagens color range would not be something like lambos oranges or greens more appealing and lively? BTW one 458 aound here runs in high gloss Smurf Blue livery :D

[@DecemYang]

Why he is processes marked places? and with what?

[@andrewscott2090]

Can you use nail polish for paint????

[@TheScalemodelingChannel]

I have heard you can. Its not ideal though as it stays soft ish

[@andrewscott2090]

The Scalemodeling Channel thank you for the information

[@MAN394631]

A really nice model, but i would use always original paint from Ferrari, Zero-Paint will mixing it for you

[@supacar5]

Cool color. Odd, but cool!

[@jth1987leb]

Great color

[@damianezequiel9618]

Please!, do the Pagani Huayra or Pagani Zonda

[@crossbowhunter9118]

Why do u want to get rid of the mold lines just wo

[@TheScalemodelingChannel]

Cause they are not there on the actual car and look ugly

[@fabinhominiaturas6746]

muito bom ;

[@JOAO-jb8se]

Make a fujimi honda crx

[@TheScalemodelingChannel]

This is a joke, right?