FULL 3" Downpipe & Exhaust System Install // 9th-Gen Civic FBO Part 1 of 4

[@davidbasset7557]

this guy is such a great teacher and videographer.... highly underrated

[@Kurazy32]

Instead of liking this video.. How do I love it Milan? You're the best inspiration to building my (New to me) 9th Gen Si and you know how to do it right. Much love from CALI!

[@milanmastracci]

Thanks brother! I appreciate the love 👊

[@tylerritchie6579]

I'm just curious as to how he found a 9th gen that is SOOO clean

[@Zuudoh]

man i love how you do videos. you talk about what you yourself have planned as well as giving a proper, straight forward explanation/demonstration

[@tylervitayanuvatti5511]

Man you make it look so easy. I started at 9am and finished at 6pm. Everything was rusty, some bolts eventually snapped but the dp bracket had to be cut with a sawzall to get that section out

[@mikea5205]

If you opened a Honda performance shop in Arizona or California you'd bank!

[@milanmastracci]

Good thing the borders are closed 🙃

[@dirtyaffg4190]

This. Please move to Cali 😂😭

[@mikea5205]

@@dirtyaffg4190 - you got emmanual if your in Southern Cali. I'm in AZ there ain't shit here.

[@jonathan1932]

@@mikea5205 better then NM in my opinion AZ haz a quite a few big car youtubers. And non car youtubers like thatwasepic channel hes a prankster.

[@Cinnamontoastcrunch1029]

@@jonathan1932 yeah there was this car KZbinr who is big and lives in Scottsdale but I forgot the name

[@pinkstars2185]

I've watched this video like 5 times and I'll never get over how brand new the engine bay looks

[@kwckhm7757]

Brother this has got to be the most in depth video to date I've seen and I've seen ALOT. Even though it's a simple exhaust swap the way you explain it could have my kid who has barely touched a wrench know exactly what to do. Great job!

[@ApolloTx817]

Learning so much just from these videos. New to the 9th gen platform and so use to the 6th gen d/b series so new to the k series.

[@tomtomburke22]

Heads up to anyone buying this car. These transmissions tend to have bad synchros and sleeves, coupled with a weak second gear. Milan has a great video on the ktuned Clutch master and slave replacement. That along with shifter bushings is a must with this car. Honda hit me with a 15,000$ repair bill on a bad transmission (I don't even know how that's possible as the replacement trans is cheaper), and they refuse to cover it as there's no proof (I have a video posted to show the shavings in my trans fluid). That's why I'm super stoked to see your video on the clutch replacement and transmission removal. Our power steering rack doesn't like to come off the subframe up here in Canada from the rust due to road salt. Anyone has experience or good pointers to aid with this? Or is dropping the rack with the subframe the best bet? Props to the best video tutorials on car parts, you manage to make everything easy to see in the shot, and easy to follow.

[@CrispyFloat]

I wish you did these videos for 8th gen si. Best directional videos on KZbin

[@milanmastracci]

Thanks buddy!! These videos are also helpful to the 8th gen community since the 9th is so similar. Keep that in mind 👊

[@pablonator3000able]

Pure entertainment and knowledge 👌 you're my guide to my SI build

[@dmystro7585]

I'm glad you are doing this series. I bought my fb6 last year

[@milanmastracci]

I'm happy to hear that man! 🙌

[@therealkidpoet6293]

Just came across this video. I've been looking for someone to install my DP, but you just educated me enough to where I'm confident to do it myself. Thank you

[@moisesguajardo8248]

I love watching your content step by step it’s amazing how much one learns hearing you explain everything , Ty 🤝

[@mm-ui9bc]

I just finished wrapping my header (stock) to the cat with header wrap. The exhaust I built was very load inside, but now is much nicer in cab now. Great vids.

[@abhishekchaudhary9542]

Soichiro Honda is proud of you

[@milanmastracci]

I wish!! ❤️

[@sideeffex5800]

thanks for the video brother, i got a technical wiriting assignment ong budget upgrades to a 4 cylinder car this will make it much easier

[@jrgonzalez7389]

Thanks for the video now I feel confident to install a down pipe I just got my Hondata flash pro can’t wait to install my goodies

[@milanmastracci]

Glad I could help!

[@tomtomburke22]

If you're getting the hasport mounts get the 70. I got the 62 and it's much much better than stock. But still a little soft. The vibrations and noise are almost the same between the two. And yes it will shake a bit at first. Calms down after a month of driving. It still vibrates a bit. But it's not crazy. Approved by my family who hates loud/modified/aggressive feeling cars. It's the best first mod in my opinion. It's cheap, easy to install. Car is way more responsive, and it's a little louder. Makes the car feel more sporty.

[@milanmastracci]

I appreciate that feedback Thomas! 👊 Do you still have the 62 in your car or have you swapped it out?

[@andrewmueller3715]

I love how informative your videos are. I'm looking at getting one of these cars and your videos are super helpful

[@hthmoney11]

Get the upper pitch mount too! That reduces the vibrations of the Rear motor mount

[@milanmastracci]

Already got it lol Gonna be throwing the rest of the mounts after its FBO and I have other supporting mods on the car.

[@louvendran7273]

That exhaust looks amazing. The beauty of stainless steel. Happy driving. So many options with after market exhausts, its a nightmare to choose the correct setup. Great video and content as always.

[@milanmastracci]

On popular chassis', there are plenty of options and I wouldn't be surprised if I change things up down the road, just like what I did with my Z lol

[@blakebucknall4008]

You don't have to remove the wipers and the wiper surrounds. Just activate the wipers and take the key out quickly so the wipers are sitting upwards. then you only remove the main middle part and not mess around with wiper blades. Just saves that little hassle

[@raging_carnut]

Triple M method at it again!!

[@milanmastracci]

And this isn't the last of it 🙌

[@thedeltadriver1438]

all this guy's videos are so helpful

[@milanmastracci]

Glad you like them!

[@GGdevelopment]

Still don't understand how you ain't over 500k subs man. i've been watching (on and off) for about 2-3+ yrs

[@youwantshum9860]

Cause he's another internet mechanic who sometimes spreads bad information

[@GGdevelopment]

@@youwantshum9860 valid i guess.

[@Jrponline]

We Want MOOOAR POWAAA!!!!!

[@milanmastracci]

MO POWA BABY!!!

[@JacesOwnWorld]

Very good quality how to video! Impressed!

[@milanmastracci]

Glad you liked it! Thank you👊

[@steveo9635]

this helps me out so much! thanks

[@milanmastracci]

Happy to hear that Steve! Be sure to share it 🙌

[@BarrioBuildz]

This dude has the best YT channel 🔥

[@claudioagmfilho]

Hi there, i am all the way from Recife in Brazil South America, and I really liked your video, very informative and all, thank you for sharing it with us…🇧🇷

[@milanmastracci]

Thanks for watching Claudio! Welcome to the channel 🙌

[@tomtomburke22]

So excited for the control arm bushings! Very little information regarding them on this car

[@milanmastracci]

Couldn't agree with you more, and I found solutions for both bushings, where there is only really light on the one!

[@ogjhernandez2537]

can you do a video on a clutch replacement when it needs to be done ,id trust you more than other people lol based on how detailed and informative you are bro

[@milanmastracci]

Will do brother!

[@lees5313]

Love the sound of my full race catted dp with q300.

[@milanmastracci]

Got a sound clip?

[@slumygoat]

Deserve more likes brudda you do a slam up job

[@LogicTitan26]

your videos are so good and indepth i love it

[@thomassylvestro9041]

Excellent video.. Extremely well done. Thank you

[@chevaughnbarclay2390]

Nice video and well done explaining while working great job

[@milanmastracci]

Glad you liked it!

[@dereklackey1]

Thanks for the video! I really like the setup.

[@milanmastracci]

Glad it was helpful Derek! Thank you 🙌

[@DriversTherapy]

Hi! Great video. Exhaust looks great. Question for you if you don't mind. What camera are you using? Thank you.

[@TheJanz3n]

I had a similar setup on my 9th gen. Full race catless downpipe and yonaka exhaust. The drone at 2500 - 3500 was unreal. Recently sold the exhaust and went back to stock. The 5% power increase with a full 3 inch exhaust wasn't worth the drone.

[@ThatBoosted9thGen]

you should go w/ a q300, barely any drone

[@milanmastracci]

Tbh, its not that bad. Maybe because I'm used to louder cars maybe, but I could daily drive with this setup no problem. You're back to full stock exhaust?

[@TheJanz3n]

@@milanmastracci mine was just awful. It shook my brain. It also got worse after a year of driving. I think the drone was louder than the exhaust note outside the car. I put the stock exhaust back on with the full race down pipe. It's still louder than stock but no drone. I debated getting a q300 but all the KZbin videos sound the same as the yonaka with no cat.

[@TheJanz3n]

@@ThatBoosted9thGen every video of a q300 with no cat sounds the same as the yonaka with no cat. I don't want to spend the money on another more expensive exhaust and have the same drone.

[@thomascanning595]

Helll yeah brother!!

[@milanmastracci]

Gonna keep it coming!!

[@dafb6dafb62]

Nice bro this is why I love my 9th civic si also 🥲

[@slowka]

Good vid, following this series...

[@milanmastracci]

Thanks man! Don't forget to sub and hit the bell notification 🙌

[@mario.spencer]

Impecable as always bro.

[@milanmastracci]

Much appreciated Mario!! 👊

[@roberthunn2370]

Sup friend , impressed by ur mechanic skills and knowledge. Ik the 9the gen civic lx 1.8 and the si are a lil different in the placement of the throttle body, was wondering if doing a cold air intake would be possible with out causing map sensor readings and the car running even shitter. Just a wonder before I tear into it this morning. Thanks bud , by the way I are probably the only person I’ve subscribed to, I’m not a very great computer person. Wrench on, Rob

[@jakeyfpv]

Damn dude i want tl wheels for my 9th gen coupe too now

[@sethgarland8009]

What happened to the head swap you were having built??

[@johnsnow5167]

You make awesome videos! I watched a video of you painting calipers and then I watched this one lol. You definitely look more “wise”? Lol

[@milanmastracci]

Thanks Mario! Glad you think so ahah

[@bigboymunch3691]

I want this car now

[@milanmastracci]

It's such a fun car to daily!

[@IdrisFashan]

K24Z!!! Awesome. Are you keeping the head in original form?

[@milanmastracci]

I think for now, yes!

[@guillermotijero7009]

Awesome video man have similar upgrades I haven’t installed yet but just wondering what base map you’re running with hondata ?

[@SATXrattlesnake]

I like your shirt. Too bad I can't afford those

[@salvadorrojas8290]

What did you do with the check engine light, because you remove the catalitic converter?

[@nwlg2497]

So you changed just the bushings on the lower control arms? And if so, where did you get the new bushings from?

[@karlbuentipo4681]

Man I'd like to hang with ya and just do car stuff lol

[@alexwalters74]

Hello! Where can I find the exhaust??? It seems to be out of stock everywhere :((( what would be a good alternative? I love the way yours sounds and I’m trying to avoid the weed wacker sound as much as possible

[@mattrosich]

Where was your jack points at on the front of the car? The rear was the differential case I assume?

[@CLBooney]

Fire 🔥

[@milanmastracci]

❤️

[@mjvillao52]

Rotation I can get it anywhere, how about balancing the tires?

[@jessbailey6202]

What car are those wheels off of? And tires and tire size if you don’t mind. Car looks great.

[@kwckhm7757]

So I have a 98 dx hatchback and currently am on the fence about what engine. I've been strongly leaning towards the k24z3. Thoughts? Love the channel. So much info

[@Ace20001216]

Come down to Toronto 🇨🇦

[@milanmastracci]

I think you mean up 😂 come down to Niagara!

[@bchnts]

Great video Milan ...It would be really really interesting to see porting and maybe cams I think you will get good results... also when you were cracking the bolts I saw a magnet on the oil filter do they work ????

[@milanmastracci]

Yeah that would be!! From what I've seen, they do. I have the same filter magnet on my 370Z. Metal particles floating in the oil will get attracted to the magnet in the filter, and when you do an oil and filter change, all of those metal pieces will come out. I want to cut one open to find out how well they work.

[@bchnts]

@@milanmastracci I was thinking the same thing I want to install one so that I cut it open to see if it works

[@openshot]

How is the exhaust holding up? I hear the flanges welds crack easy.

[@shanesportsman3921]

What would you suggest for the rear motor mount if I can’t get the bolts out with my impact and PB blaster?

[@foreverfinerthings39]

Do you have any recommendations parts places for exhaust 2003 Acura cl base

[@lobes4president767]

So when I switch to an aftermarket downpipe I should be changing my rear mount?

[@Kinda_alright]

I’m about to do the motor mount, do you know the torque specs for the bolts? I can’t find a consistent answer anywhere.. thank you!

[@dianahernandez1375]

Ceramic vht paint how long you let it run with heat gun with the box and what size box you use

[@aochio9735]

Any drone with this exhaust on hey?

[@dubzc5895]

Ktune makes a good DP. Lol 😬😎

[@milanmastracci]

They really do! I like it 👏

[@g.tobias761]

How did the you like the yonaka exhaust? I’m running k tuned but the front pipe bent from going over a bad bump and now it rattles. Looking to get a yonaka exhaust as they are similar in shape/size! What’s your input on the yonaka exhaust?

[@josh-dn3ss]

Hey where did you get the grill for the accord coupe? Also the steering wheel? Thanks!

[@cee5773]

Honda Honda Honda honndaaaaaaaa

[@akramalhabsi390]

Did you get any check engine light??

[@CarlosTiradoM]

Hi, i have a question, is really necesary change the lower torque mount?

[@luisarmando1013]

Can I run my Downpipe on my si with just with the reflash tune ?

[@MBZXZ]

is the accord currently for sell right now? i have a 2007 acura tl type s manual , idk if you are interested for trade?

[@milanmastracci]

That sounds fun, but I'm looking to reduce the number of cars I have lol Thank you though!

[@hekcastillo]

Wassup Milan??? Hoping u can shed some light for me. I have a 9th Gen with a CAI, 3” DP with defouler n 3” catback exhaust and flashed it with the hondata base map other than that it’s bone stock. My question is do u have any tips on getting the monitors ready for emission?? I’ve tried getting it ready by driving it n doing the different things but still not ready! Thanks in advance n sry for the lengthy message 🙏🏾

[@12mohamedali]

Is it a catted or catless downpipe?

[@outofmind9222]

Does dP require tune?

[@Jayyy64]

Wish mine was stock again 🤣 too modded now

[@FixitFred]

Where did you get the spray nozzle you use on the dollar store alcohol bottle that was used to clean the exhaust

[@milanmastracci]

Something like this: amzn.to/3yYELEb

[@thomasrunyan3651]

So I'm installing a DP and exhaust on my 9th gen. When I research downpipes it says it's only for turbo charged cars. So am I wasting my time and money?

[@Miztix]

How do you retune after?

[@luismatias1118]

Hey I got a question when you said you te-tuned it what tune did you use ?was it the off the shelf tunes on the actual Hondata? If so which one ?

[@milanmastracci]

I used a couple of the off the shelf tunes that came with the Hondata to tie me off until I got it professionally tuned from @TuningByNick

[@rasenchidoricumshotsiv6523]

15:06 noted 😉

[@milanmastracci]

Ahaha I knew someone would take the bait 😂

[@albinquintero5969]

Hello, I also put a 70a hasport bracket and inside it shakes and there is more noise, but I don't know if I can make a video by placing dinamate, which is an isonirization of sound and vibrations. I don't know if that helps, I want to install it but I don't know if it works. Very good video I made modifications equal to yours and it is worth doing it only that I have a problem with my throttle body of the grams brand it sends me a factory error that cannot be solved.

[@milanmastracci]

Hey Albin! Dynamat will help a bit with reducing some noises and vibrations, however most of them are actually from some of the things you keep in your car, like keys, change, personal belongings, etc. Have you tried doing a throttle relearn procedure? Maybe that will help!

[@albinquintero5969]

@@milanmastracci Hello, could you explain to me how to do that re-learning of the accelerator, I tell you that it is very uncomfortable, you cannot have the car like this for a long time because it sends me that error and I chose to buy the k-tuned, they have told me that they do not have that That fails, I hope you help me please with the problem I have with the acceleration body brand grams. Greetings

[@carlossince92]

Noiceeee 👌

[@milanmastracci]

Tanks!!! 😁

[@-nkl8868]

heard of a clutch bite point changing with temp on a 9th gen (comp clutch w lw flywheel)

[@milanmastracci]

Try re-bleeding your clutch. I know that the 9th gens should have the clutch pedal adjusted. I will be making a video regarding that in the future 👍

[@-nkl8868]

@@milanmastracci I've bled it a couple times to make sure no air, im also running hybrid racing cmc and rsx type s slave

[@IgorD33]

Something gotta give if there’s no flex on the suspension or the motor mounts. It will destroy axles and transmission

[@thomascanning595]

I doubt it will…

[@gedas3419]

actually constant wheelspin is a lot better for longevity, rather than that hitting noise during launch. It grips up, it tenses up the suspension rubber, it tenses up the engine mounts, only then it spins "torques-up" the wheels, when torque breaks traction, then it releases that tension like slingshot, and again tenses, drops tension, tension, no tension. Actually that play IS DAMAGING. That's why drifters Solid aluminum mount their rear subframes, have Heim-joints in suspension instead of rubber, and after full day of clutch-kicks on 265's semi slicks, they get home without a single broken axlehalf. Imagine drift car go entire drift doing CH-CH-CH-CH-CH sounds NO.

[@bakamotorworks505]

@@gedas3419 exactly, the chattering is doing more damage by putting higher amplitude shocks through the system, and wearing out the other mounts and bushings

[@donavenlandry366]

Just wondering if you have any complaints about the k tuned catless downpipe? Any bad hissing or unwanted noises.

[@milanmastracci]

Tbh I think it is leaking from the top mounting position between the cylinder head flange and the downpipe. A 1 piece design would be best IMO. Performancewise, I've had no issues with it.

[@MyJarrus]

oil filter magnet, wow

[@milanmastracci]

Yeeee

[@fb6markk]

what phone mount is that ? i’m looking for one

[@dhalesoliven1239]

What do you mean about retuning it after you install your exhaust? Did you put a different tune?

[@milanmastracci]

I did! Ideally, with every hardware change to the engine, you would want to revise the tune for it so you get the most amount of power from those mods.

[@dhalesoliven1239]

@@milanmastracci but with the same tune that you put at the beginning right? You just need to re tune it?

[@Ahmedpakido]

So what year is this civic?

[@Lucky_Logan]

You wanna open a shop? I’ll come work for you. I’m just as meticulous with my maintenance on my vehicles. Especially my motorcycles.

[@jrdirtbikes.1511]

The hasport mount isnt necessary. Wont break or hit nothing

[@alexgarcia8365]

Do you believe this would translate good on a 19 civic sport with a 2L engine?

[@milanmastracci]

The concept, yes. The parts, probably not.