Well done and well noted for your education, much appreciated

That's crazy twisting wires and electrical tape. Wtf

8 gen paddle shit

Won't changing the offset affect ABS brakes?

Hey man hope everything is well hope we hear from you soon!

I agree 🫡

I just bought OEM Coated Rotors. (it is not Spray paint). the Spray paint is specifically for the Caliper, it should say on the can "Do not apply to Rotors".

The spray paint is specifically for the Caliper, not the Rotors! Rotors should never be spray painted or contaminated with any substance. Also, don't confuse OEM Rotors that are coated with a Specialized Zinc Coating (it is not spray paint). Also, always apply the Manufacture specified amount of Torque to the bolts. Lastly, some Vehicles Specify the use of a specific grade of thread locking compound to the bolts. (it prevents the bolts from creeping out over time, caused by expansion and contraction from hundreds of heat up and cool down cycles.) be safe!

If you do this to your commuter you are a douche bag with micropenis energy, a drooling smooth brain, or a combo of both. This is from your neighbors: FUCK YOU

FIXD

Hey, i didn’t understand what you said about the a lighter flywheel and i did the same that you did, but now im having a misfire even when i put it back on stock ecu. And the car is going into limp mode. What should i do?

Where do you purchase your control arms for $2.00 more than the bushings?

Will this take out a fish smell?

I know the Z7 Torque Mount is on the oil pan not to sure of the Z3

Would yall recommend an aftermarket bov and air intake along with this flashpro for an 11th gen civic

Thank you bro💪🏽💪🏽

Clear video. Thanks for sharing so clearly exactly what you do and use. There are so many opinions about lubricating brake components and what lubricant or anti-seize to use or not use. I live in Texas so can't relate to all the corrosion issues caused by winter road salt and the extreme methods necessary to keep cars operating in your conditions.

This adds extra clearance within the valve guides and kills it

If I get long tube headers for my 370z would u recommend I scuff it n add the ceramic coat and wrap it with the exhaust wrap?

only 30mins wow.... i was thinking like 2 hours hahahaha

this video was very helpful keep up the good work

Paints the rotors which is a no-no…and yet ignores the rusty ass calipers, which is the one thing he should paint, lol…

My cars has been tracked for 5+ years with bolt on billet aluminum spacers with 0 issues lol. Of course you're preaching what people should do with 0 track experience.

Oh hell no hope you plan on using them for paperweights

Bad video - cutting out the difficult part of mounting the brake pedal

preload means the gap between the suspension ? we should maintain the gap between the top ring and the bottom ring ?

7 attempts. Poor starter.

Hey does anyone know what all I would have to do to make that oil pump work? I've got the tism and words don't make sense to me unless someone explains them. I just want to raise my rpm limit by like 500 and make sure when I'm driving hard my oil pump is really "working".

Presentable cylinder head Bro really at the meet with valve cover off 😂

Great job! Gold star!

Now hold on a minute, with the best exhaust on the market..?? Im working on a setup that is partially completed, so far it has deleted the droan- deleted the Rasp trumpet sound !! (Not everyone wants to be in the marching band) just saying, It just sounds low, I still need to install a new equal length exhaust header, and then get'ur retuned bye admin tuning, ive got 310rwhp now, im looking to pickup another 20hp+ when im finished 😎

podaaaa ...............mmmmmm.......

I just use a Gatorade bottle and turkey baster for the brake bleed. This is way too complicated lol

DOT 3 gets blacker than a cat every year

Do the stock intake springs have more coils at the bottom? My springs got all mixed up and springs have no colors to identify intake from exhaust. HELP!

Well made, the remove first was a good one.

8th gen SI gang!!

What socket wrench are you using? I wanna get one.

That model doesn't exist for sale anymore in 2024 according to your link in the description..

Finally a great video on intake install

VHT doesn’t work, use cerakote

What can I use for the rust ?

Those valves look brilliant, but personally I won't be 800 grit sanding my valve stems because those clearances are precision engineered and once they're out of spec you need new valves altogether, otherwise you don't have the appropriate film of oil in-between. Maybe if I'm coating them and I need to slim them down first, I might.

What grit

What color of the spray paint sir? Its silver or aluminum color?

Nicely done and presented well done 👏

I average 4.5 years with 55 watt ballasts and cheap ebay bulbs. That's on par with led.

im going rv6 catted dp and invidia n1 exhaust how do I tune them with my hondata?

What grit polish did you use? What grit cutter did you use?

Possible to control air to fuel ratio? I just changed cats but left the 3rd one off (filter) on a 8th Gen 09 ExL accord. CEL indicates catalytic inefficiency but no longer po268 and stuff like that.