FULL BUILD: REBUILDING A SALVAGE CRASHED KAWASAKI NINJA ZX-6R

** MIKES BUILDZ MERCH LINK **
mikesbuildz.my...
In this video, I show how the entire process of rebuilding my Kawasaki Ninja ZX6R.
** I apologize in advance for the areas with music overlay, I got hit with a couple copyright issues so I had to fix that with copyright free music. **
Feel free to check out the entire build series below:
• 2010 KAWASAKI NINJA ZX...
CHANNEL SUPPORTERS:
ABS FAIRINGS
Discount Code: MIKESBUILDZ25
absfairings.com/
VEVOR
5% Discount Code: VVSALES5
s.vevor.com/bf...
INNOVV
10% Discount Code: MIKESBUILDZ 10
www.innovv.com...
HYPERLITE
10% Discount Code: MIKESBUILDZ 10
hi-hyperlite.c...
TESLONG
Click the Link below to purchase the Articulating Borescope ⬇️
amzn.to/3OsblrR
*************************
Music Credit:
Music from #InAudio: inaudio.org/
MokkaMusic - Under Water
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/m...
License code: OUZCY8KSSZAKCHUW
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/m...
License code: BOL7V1ERQRPIWH8O
Music Info: Savage - by SoulProdMusic.
bit.ly/3qLR8nF
Music from PIXABAY
Goldn - Praz Khanal
Whip - Praz Khanal
Idols - Praz Khanal
King Around Here - Alex Grohl
Background Trap - Alexi Action
*************************
#zx6r r #zx6rbuild #motorcycle #crashedzx6r #wreckedbike #mikesbuildz #kawasaki #ninja #bike #bikebuild #rebuild #bikelife
*********************
How to Remove / Install Kawasaki Ninja ZX6R Fairing
How to Remove /Install Kawasaki Ninja ZX6R Gas tank
How To Remove / Install Kawasaki Ninja ZX6R Brake pads
How To Remove / Install Kawasaki Ninja ZX6R Air filter
How To Remove / Install Kawasaki Ninja ZX6R Spark plug
How To Remove / Install Kawasaki Ninja ZX6R Sprockets
How To Remove / Install Kawasaki Ninja ZX6R Chain
How To Remove / Install Kawasaki Ninja ZX6R Clutch LeveR
How To Remove / Install Kawasaki Ninja ZX6R Throttle Grips
How To Remove / Install Kawasaki Ninja ZX6R Wheel
How To Remove / Install Kawasaki Ninja ZX6R Air box
How To Remove / Install Kawasaki Ninja ZX6R Air Filter
How To Remove / Install Kawasaki Ninja ZX6R Clutch cable
How To Remove / Install Kawasaki Ninja ZX6R Throttle cable
*********************
#mikesbuildz #kawasaki #ninja #ninjazx6r #zx6r #wreckedbike #crashedbike #bikerebuild #wreckedbikerebuild #bike #bikelife #bikelover #bikebuild #motorcycle #motorcyclerebuild #motovlog #moto

[@MIKESBUILDZ]

I hope you enjoy this video. Let me know what you think about how the ZX6R rebuild turned out. Tell me about the video. Do you prefer more time-lapse and less talking? Or more talking and less time-lapse? Do you enjoy the mix of some background music and tool chatter, wrenching and overall work “noise”? Comment your thoughts below and don’t forget to like and subscribe!

[@nfg587]

My type of video everything was perfect. Great job with the build, what year is the bike?, how much did you end up spending on it after all the parts and how much did you get it for?

[@MIKESBUILDZ]

@nfg587 thanks, glad you enjoyed the video. It was originally a 2010. I definitely went a bit over budget on this build but I’m happy with the way it turned out. I will be setting up a KZbin membership soon exclusively to talk about the builds, cost and everything that happens behind the scene. Its a monthly membership that’ll cost less than a cup of coffee, so if you want to support the channel you’re free to join. Stay tuned for more.

[@brodygillett4064]

Am I seeing things or is the manifold on the header closest to the camera when you put them on cracked???

[@MIKESBUILDZ]

Negative.

[@Motorcycleman-hs9yr]

Allways liked the restoration videos that are long and more detailed like this one.Its a great video!

[@MIKESBUILDZ]

Thank you very much. Glad you liked it!

[@gsxrdraco_]

As an owner of a 13’ & 21’ zx6, this video was AMAZING. True dedication to a rebuild and giving the bike a life again.

[@MIKESBUILDZ]

Great bikes for sure, I’ve owned a few. I think it’s the only bike that I’ll always have in my stable. Thank you, check out the ZX10R rebuild, you might enjoy that too.

[@emviouss4407]

You had the patience of a saint Mike, I would’ve set fire to that bike before the first start up. You’re a Don 👏🏽👏🏽👏🏽👏🏽

[@MIKESBUILDZ]

Thank you. This was definitely one of the most time consuming project I have under taken 👍

[@AliraS980]

This video is incredibly helpful. I recently started working on my 2016 ZX6R, and knowing the correct order for removing the radiator and headers will be invaluable when I attempt to install a stunt oil baffle and pickup. Thank you so much!

[@MIKESBUILDZ]

Great to hear! You’re welcome. Stay tuned for more.

[@CaffeineThrottle]

I could watch you all day due to your knowledge and skill. The talking and time lapse is perfect.Reason,the talking is too the point and you've chosen the correct portions to time lapse. I knew you're perceived problem with the forks was the header it sticks ridiculously out. It was still nice to watch you check the fork tubes, it's just like checking pushrods. Glass is best,as it's perfectly flat.I scrounged a huge mirror long time ago and cut it 4'x4' . It's a thick old sucker 7/16", came out of a bar my buddy owned. As for background tools and sounds cool,may I humbly suggest something with a beat rock n roll blues mix '50's-'70's. John Lee Hooker, Elvis, Muddy, Clapton,ZZ ,3 Dog Night.Remember it's you're channel, but you ask. I watched this thing all night straight through while servicing and cleaning some of my competition guns for tomorrow. Very entertaining.👏👏👏💀

[@MIKESBUILDZ]

Thank you for taking the time to leave a detailed feedback. I appreciate that, it encourages me to make necessary changes for future videos. Stay tuned for more!

[@CaffeineThrottle]

Just a tip bro , round the corners of the brackets your making, with a grinder. It gives them a more finished look and will keep you from getting poked when you're in a hurry.👍

[@MIKESBUILDZ]

Good idea! Thanks for the tip.

[@fjones1914]

That was a great 4 hours of a bike build! Came out looking great in the end AND after the refix!

[@MIKESBUILDZ]

Thank you! I definitely agreee

[@LucienVernet]

Beautiful content. I've learned with joy and appreciations. Being that l don't know anything about motorcycles, but only know how to ride them. I was captived from the beginning. Great presentation.

[@MIKESBUILDZ]

Well said! Thank you. Stay tuned for more!

[@brandonhoolmans8525]

Great video! Enjoyed evey bit of it.. made me curious tho, would be nice to see a estimated cost overvieuw for a rebuild like this! Keep up the great work!

[@MIKESBUILDZ]

Glad you liked it! I will be making a video detailing cost of my builds that will be available to channel members only soon. Stay tuned for that.

[@formegolf]

Hello Mike, I watched the entire build and I have to say very good job. I like your engineering on thinking outside the box and making everything work. One idea I will throw your way and that is to break them up into 10-15 minute videos. That is what everybody else is doing. I think it gives them more views but not sure. Anyway great, great job. I really enjoyed watching your work. Keep it up and God bless! Mark.

[@MIKESBUILDZ]

Hello Mark, thank you for the feedback. I’m glad you enjoyed the video. Yeah I have 20 minutes ish videos of this build on my channel. For all my builds, I make video series which is about 20 minutes, I make a full build video just like this one and a timelapse video of the entire video. I know different folks want different forms of video. This way I cater for every viewer. Though there’s always those who still complain lol. Be sure to check out the series and other builds on the channel. Stay tuned for more updates

[@PUBGmobilegaming-b2n]

Dream bike.. Watching from Philippines ❤️❤️

[@MIKESBUILDZ]

Welcome aboard!

[@dylannonya4577]

Love this dude. Great ASMR and full of knowledge

[@MIKESBUILDZ]

Thank you, I appreciate that! Glad you enjoyed it.

[@cseivard]

Great. Inspiring even. Thanks.

[@MIKESBUILDZ]

Thank you 😊

[@donnyleblanc9768]

I'm from Miramichi nb..nice work buddy

[@MIKESBUILDZ]

That’s awesome bro. Thank you. Never heard about that place but a quick google search revealed it’s a 33 hours drive from Winnipeg MB lol.

[@CaffeineThrottle]

It came out fantastic, paint colors are awesome.Determination A+

[@MIKESBUILDZ]

Thank you! Cheers!

[@CaffeineThrottle]

I would love to see you do a ZX 14 R . 👋👍

[@MIKESBUILDZ]

That’s on my list too.

[@jamesgeorgevellavella1961]

The work you do is awe inspiring. Well done. Your rebuilds are next level

[@MIKESBUILDZ]

Thank you very much for the comment. I appreciate it. Check out the other builds and stay tuned for more.

[@AdamAhmed-d8z]

I’m having a hard time with all my lights on my rebuild could you help me with how you figured it out. Did you have a brand new wiring harness?

[@MIKESBUILDZ]

No I used the original harness. I made new connections to fit the 2020+ headlight on the bike.

[@laurentmaggio9439]

Very Nice garage with lot of surface 👍

[@MIKESBUILDZ]

Thank you! I definitely need a bigger space now.

[@laurentmaggio9439]

@@MIKESBUILDZ more passion is big more bike there is 😀

[@MIKESBUILDZ]

Haha 100%

[@supaxr]

This is a great video..ypur attention to details 👏 is real good ..very enjoyable watch

[@MIKESBUILDZ]

Thank you very much! Glad you enjoyed it!

[@iman58]

Good job 👍 bro however the sound of the damaged exhaust sounds better.

[@MIKESBUILDZ]

Thanks.

[@Strive-For-Different]

You should be torquing your triple tree pinch bolts. It’s extremely critical in the performance of the suspension. As well as axe lug pinch bolts

[@MIKESBUILDZ]

Oh I never knew that. Thanks for this important information.

[@Strive-For-Different]

@@MIKESBUILDZ it’s possible to over tighten fork pinch bolt and squeeze the outer tube just enough to make it feel sticky almost. I race motocross and can always tell when I’ve been lied to about my front end being properly tightened

[@michealshoebridge3752]

Just wacthing this for the first time from the uk, great build, nice tips and tricks, keep up the builds I’ll be following :)

[@MIKESBUILDZ]

Thank you! Appreciate that. Stay tuned, much more too come!

[@alokkulkarni78]

Loved the hard work, practical work and detailing, just worried about the chasis weld what's your opinion personally will it be strong enough?

[@MIKESBUILDZ]

Thank you. The chassis was welded by a professional aeronautic engineer with over 20 years experience in that field. I am very confident in the repair. The ZX6R is also used by a lot of stunt guys who cut the frame in half and weld in a steel frame. Those bikes go through a lot of abuse and they have no problems.

[@skandix]

Nice work!

[@MIKESBUILDZ]

Thank you! Cheers!

[@Ygwrtm]

I like your video ❤ IM from Indonesian

[@MIKESBUILDZ]

Thank you! Cheers from Canada 🇨🇦

[@shadowhawk7521]

I like these vids bro deserves more views

[@MIKESBUILDZ]

Thank you 😊

[@simbaisthelionKing]

Phenominal build mate!!!

[@MIKESBUILDZ]

Thanks bro! More to come, stay tuned.

[@Qrides]

I hope I have the skills to do everything u did in this video one day nice video man !

[@MIKESBUILDZ]

You can do it!

[@ppg19782]

That black ninja in the background looks sweet. Nice color combo. Year? Trim? Nice build up as well. Safe riding Much blessings 🙌 🙏 🏍🏍🏍😎😎😎💪💪💪

[@MIKESBUILDZ]

Thank you. It’s a 2020 Kawasaki Ninja ZX10R. Check out the full build video. kzbin.info/www/bejne/jpXZgGOrps2ed5Ysi=4JzWS6qlG0kyDl3v

[@tonylkeen]

Just wanted to tell you great job brother, really enjoying your content

[@MIKESBUILDZ]

Thank you brother. I really appreciate that! Comments like this keep me going. Stay tuned for the new build.

[@carlosdavila7090]

Great job brother 😊😊

[@MIKESBUILDZ]

Thank you so much 😀

[@klel62]

Hello from France . Very good job . I wish you the best . 😉✌️

[@MIKESBUILDZ]

Hello from Canada! Thank you! You too!

[@mikedominick]

Great job! Just FYI, those rearsets are Vortex brand. All the parts can be purchased individually. A lot of track bikes have them. Mine does. Not cheap!

[@MIKESBUILDZ]

Thanks for the info!

[@mikedominick]

@@MIKESBUILDZ absolutely! I love watching your builds. You have a great “get er done” mindset. I’m watching this one in 20-30 min chunks and ride a 2016 ZX6R at the track.

[@MIKESBUILDZ]

Thank you! I definitely do try to get er done, even when I don’t feel like it lol. Nice bike, I love the ZX6R. I will always own one.

[@martindoychev5921]

How do you organize all the bolts and different parts, so you know what goes where?

[@MIKESBUILDZ]

I just know where hardware goes. I’ve done this work too many times. Though it helps to have everything in a bag and labeled.

[@blackbirdxx4613]

I like that you explain things

[@MIKESBUILDZ]

That’s great, thanks!

[@KateWilliams-p1h]

Great video thanks! Where do you find your parts I just picked up an 01 zx6r . Do you have any suggestions where I can start ? This would be my first rebuild 😊 thanks again for the vid.

[@MIKESBUILDZ]

Thank you. I mostly use eBay for parts. That’s hard to say because I don’t know what damage is on the bike.

[@KateWilliams-p1h]

@@MIKESBUILDZ thanks for responding, so far fuel injectors missing ,air box missing ,carburetor missing ,the frame forks visually from what I can see is in fare condition going to be doing some further inspection on the bike in the next 2 weeks to see what needs fixing . That’s what I know at this point, keep up the great Work mike really informative video you I been enjoying them 👍🏻

[@MIKESBUILDZ]

@@KateWilliams-p1h Seems like you picked up a decent project for sure. If the bike is in good structural condition, i would work on getting it running right before diving into aesthetics. However, sometimes it doesnt go as planned. Good luck with the build!

[@Jeramy-t3o]

Man this is the first time I watched your channel nice job man

[@MIKESBUILDZ]

Welcome aboard! Thank you. Stay tuned, much more to come 🫡

[@jimmydahitman]

Took me a month plus to finish watching but it was worth. Keep up the good job mike 🫡

[@MIKESBUILDZ]

Awesome, Hope you enjoyed it!

[@EricLeePiano]

that was amazing 👏🏻👏🏻

[@MIKESBUILDZ]

Thank you 😊

[@ΓιωργοςΚρυστανας]

I realy like watching your video! It's cool to be an enginen! Keep doing your very good job and shoving it to everyĺikes it! Like a teacher in a school!! I really like to be your student!!

[@MIKESBUILDZ]

Thank you very much! I’m glad you enjoy the videos. Stay tuned for more.

[@myloveforgrowing7908]

Sup bro love the content just want to know where is the best places to buy used bikes or crashes bike like you have on your channel I want to do a build

[@MIKESBUILDZ]

Hey bro. Thank you. I have a business so I have access to more inventory. IAAI and Copart is a good source for public buyer.

[@NinjaKoalaAUTW]

fantastic job, brother well done

[@MIKESBUILDZ]

Thank you! Appreciated!

[@HD.4n1m4]

Olá, sou do Brasil🇧🇷 acompanho vc a alguns dias belo trabalh👏

[@MIKESBUILDZ]

Thank you very much. I appreciate that. Stay tuned for more 🫡

[@ppg19782]

If you get a hold of a GSXR 1000 for a build up like this it would be awesome 👌 👏

[@MIKESBUILDZ]

Stay tuned. I might happen 🫡

[@JuanEstebanEcheverriEcha-tp5mi]

Great video!

[@MIKESBUILDZ]

Thanks. Glad you enjoyed it

[@nativenation3296]

Seen from Ontario, Canada. Nice rebuild Mike👌.

[@MIKESBUILDZ]

Thanks awesome! Cheers from MB, Canada 🇨🇦

[@cyrusgant2522]

Great video Mike. I enjoyed the whole process and the bike turned out great. I have a 2011 zx6r and was looking at possibly doing a 2019 fairing kit. Alot of DIY but you finessed it. Btw are you from Praia or that region?

[@MIKESBUILDZ]

Thank you very much! You can definitely do it too. You can custom make brackets or buy from Kawasaki. I’m from MB, Canada 🇨🇦

[@jeannotwesert4334]

Good job

[@MIKESBUILDZ]

Thanks

[@antonyblount5529]

A Man I like what your doing a great job on the bike love it man

[@MIKESBUILDZ]

Thank you very much. Glad you enjoy it!

[@Kephers7]

What gets me is the wiring. How do you know where everything goes and what it connects to, especially if its completely missing or cut?

[@MIKESBUILDZ]

Years of experience I guess. I’ve been rebuilding wrecked cars and bikes long before I started making KZbin video. Over 10 years doing this.

[@Kephers7]

@@MIKESBUILDZ Oh I gotcha. Do you use a book for these bikes? Or is it just from memory/knowledge of them?

[@MIKESBUILDZ]

No book. After working on so many cars and bikes, there’s a lot of similarities with how they’re put together with some tweaks here and there.

[@herfeo202]

You can label the wires with tape and a sharpie that might help putting stuff back together

[@insanetharapy6948]

Amazing video bruh

[@MIKESBUILDZ]

Thank you, Glad you liked it!

[@mikefoote3]

Where did you get your exhaust? I really like that and I want one for my 2001 ninja 12r.

[@MIKESBUILDZ]

eBay

[@wils5063]

Just some info : Original brembo never had a clutch lever package with the Brake master cylinder.

[@MIKESBUILDZ]

Thanks for the info!

[@wils5063]

@@MIKESBUILDZ and usually on the master cylinder the brembo logo is embossed, not printed. And usually it got barcode sticker on the master cylinder too.. 😁

[@liveinplaya]

nice one good job

[@MIKESBUILDZ]

Thank you! Cheers!

[@lunchonaskyscaper]

Mike, I have a 2015 GSXS 750, looking for a Radiator Guard. Where do you purchase your Rad Guards for your bikes? Thanks

[@MIKESBUILDZ]

I usually get evotech rad gaurds. R&G makes them too.

[@marcosmagalhaes6354]

Your vídeo is Very good!

[@MIKESBUILDZ]

Thank you very much!

[@Howard-i5y]

But all in all excellent job on bike rebuild

[@MIKESBUILDZ]

Thanks 🙏🏽

[@blackbirdxx4613]

Great Channel I would like you to tell us the costs just to compare to south African prices why don't you paint the switches

[@HotSizzleTV_]

Where can I go to find bikes like this ? Online auction or in person ? I always wanted to do this.

[@MIKESBUILDZ]

Salvage auctions. Mostly for business only and no in person viewing.

[@blackbirdxx4613]

Great Channel I would like you to tell us the costs just to compare to south African prices

[@MIKESBUILDZ]

Great suggestion!

[@no-pz7xy]

love it!

[@MIKESBUILDZ]

Thank you 😊

[@MrGodpasser]

3:34:38 For the trunk key, what if you use the remote control?

[@MIKESBUILDZ]

I’m not sure what you mean by remote control, but I later installed the lock that originally came with the subframe and had a key made for it.

[@MrGodpasser]

@@MIKESBUILDZ Remote control glove box lock

[@MrGodpasser]

@@MIKESBUILDZ I prefer a zip tie to solve the problem than a remote switch, Cooler~

[@MIKESBUILDZ]

Haha 🤣. Now I understand what you mean. I just wanted to be done with the bike lol. Spent way too much on it already. But I’m happy with how it turned out.

[@coreydavin1797]

Good content Mike. I think you do a very good job. I build bikes too and you are thorough in each task. Good job! -) Where are you located? US?

[@MIKESBUILDZ]

Thank you! That’s cool, bikes are fun. I’m in Manitoba Canada 🇨🇦

[@coreydavin1797]

I just subscribed, keep up the good work Mike! Thanks

[@MIKESBUILDZ]

Thank you 😊 stay tuned for more cool videos

[@blackbirdxx4613]

How long did the rebuild take mike

[@MIKESBUILDZ]

About 4-5 months. But most time was spent waiting for parts, hopping on other builds and many well spent family times.

[@Robi-lr3jg]

Did you gain some profit on that bike?

[@MIKESBUILDZ]

Good question. I have a lot invested in the bike. Will be ok with breaking even on it.

[@odenewilliamsodemuzik6328]

🔥🔥🔥🔥🔥🔥

[@MIKESBUILDZ]

🫡

[@CaffeineThrottle]

Please take the ugly tape back off the brake light switch. Just jam it with dielectric grease and plug in and forget about it. Boat trailers get backed under water every day with simple wiring and their fine as well as damn near everything else electrical on boats.They not sealed up as well as you would think,wave runners etc.... Your first instinct was fine just needed some grease.👍

[@MIKESBUILDZ]

Appreciate that!

[@saifalabachi4573]

You amazing

[@MIKESBUILDZ]

Thank you! Appreciate that!!

[@justinjones4822]

Use WD-40 on your exhaust and it’ll clean up real nice 👍🏼

[@MIKESBUILDZ]

👍🏽

[@riffansaepul3967]

Bang di brazil ada supra fit ga bang

[@MIKESBUILDZ]

? I don’t understand

[@lunchonaskyscaper]

Someday maybe a Q n A episode?

[@MIKESBUILDZ]

For sure. What would you like to know? I can start collecting questions in anticipation of that video.

[@lunchonaskyscaper]

Where did you learn how to rebuild motorcycles and how come your garage isn't insulated being in Manitoba? Second question is a joke..lol

[@MIKESBUILDZ]

@lunchonaskyscaper good question! I have an idea, I will be talking about it in the coming weeks. Haha good joke! I’m to broke to insulate the garage, all my money goes to parts lol 😂

[@SJ-ef4pv]

Track bike next

[@MIKESBUILDZ]

Soon! Lots of builds coming to the channel 🫡

[@DOCALLAN6]

does anyone know where Mike is originally from? the accent has me stuck defo Caribbean but which island?

[@MIKESBUILDZ]

I’m Nigerian 😊

[@DOCALLAN6]

@@MIKESBUILDZ wow brother, im really surprised ‼️ u got me, my boy and I at work been guessing for the past 2 hours 😆… love your work brother

[@MIKESBUILDZ]

Haha awesome bro! Must be slow at work. I appreciate man, stay tuned for more contents. 💪🏽

[@DOCALLAN6]

@@MIKESBUILDZ we doing night security, nothing but time to burn currently, so mike’s buildz is on the menu 🇬🇧🇬🇧🇬🇧 Uk based

[@MIKESBUILDZ]

Haha dope! Appreciate it bro. Stay safe 🫡

[@CaffeineThrottle]

First version was unique and better,all it needed was rubbed out and buffed.🤔

[@riffansaepul3967]

Pasi kalow di brazil harga mekas nya murah ?

[@MIKESBUILDZ]

?

[@blackbirdxx4613]

Mike fantastic video but can you vary the music as it gets monotonous for 4 hours... Sorry mate😂

[@MIKESBUILDZ]

Thank you for the feedback, great suggestion!

[@blackbirdxx4613]

I've just subbed will you give costs please to repair

[@MIKESBUILDZ]

That’s good. I will be starting a new KZbin membership series that talks about cost, builds, setbacks pretty much everything. So stay tuned for that.

[@shawngrigsby8172]

ZX6R

[@blackbirdxx4613]

I must say Mike I don't like the red hoses in my opinion

[@MIKESBUILDZ]

For sure.. all opinions are subjective

[@shawngrigsby8172]

It's your flasher on the r6

[@MIKESBUILDZ]

?

[@riffansaepul3967]

Harga master rem brembo brapa bang

[@MIKESBUILDZ]

About $400 US

[@riffansaepul3967]

@@MIKESBUILDZ trimakasih

[@MIKESBUILDZ]

@riffansaepul3967 you’re welcome!

[@idontlikekhasiilikemyboyfr8228]

Red one is better

[@MIKESBUILDZ]

👍🏽

[@READYENDDEADIMPACT]

nice, waiting new Kawasaki "kobodo, samurai"

[@MIKESBUILDZ]

Nice thanks.

[@blackbirdxx4613]

Where is this place Mike with snow 😂

[@MIKESBUILDZ]

Great white North ( Canada 🇨🇦)

[@blackbirdxx4613]

Mike take the green rim tape off😂

[@MIKESBUILDZ]

Keep watching. You’ll see why I left it on 🤣

[@blackbirdxx4613]

Mike what did you pay for it at the auction

[@MIKESBUILDZ]

Responded to you.

[@wills5482]

That's a lot of damage. Is it even financially viable to repair?

[@MIKESBUILDZ]

There sure was. Didn’t stop me though 😆

[@blackbirdxx4613]

Mike what's with the red plastic curtains 😂

[@MIKESBUILDZ]

It’s for insulation during the winter months.

[@WestOzMT]

Mate how many people wreck bike's over there ? We have bugger all here.

[@Josh-cw8by]

It's not so much that we have a lot of wrecked bikes, but rather we have fewer riders that are willing to buy a wrecked bike to rebuild.

[@MIKESBUILDZ]

Yeah there’s quite a bit out there. Most people just part it out. A few people like myself rebuild them.

[@Howard-i5y]

Why didn't you paint your rims

[@MIKESBUILDZ]

Didn’t need to..

[@feikesietsma9132]

Nice video…..iam from Holland….but the painting 😢

[@MIKESBUILDZ]

Thank you! Cheers!

[@KINGofBIKE89]

👍💪

[@MIKESBUILDZ]

🫡

[@GioAirGamer]

21:57 BRUH WTF AHAHAH

[@MIKESBUILDZ]

Haha 🤣. I think I got a hit carried away 🤣😆

[@freddyarmenta9338]

That a 2009?

[@MIKESBUILDZ]

Yes

[@hlpang1075]

Lesser commentary will be better 🤗

[@Glizzygoblin3000]

Nah bro we love mikes commentary. I wanna know what he's doing

[@MIKESBUILDZ]

I appreciate the feedback and I know I can’t please all the viewers. I also believe I’ve found a nice balance the commentary. Most people wanna know and understand what I’m doing at certain points in the videos.

[@riffansaepul3967]

Bang beli motor zx600 di negara abang brapa harga nya

[@MIKESBUILDZ]

I have a business so I get special pricing.

[@axax1573]

do you have a instagram account?

[@MIKESBUILDZ]

instagram.com/mikesbuildz/profilecard/?igsh=N2t0c2ViYXJmdmEz

[@Howard-i5y]

But all in all excellent job on bike rebuild

[@MIKESBUILDZ]

Thank you 😊