FULL GUIDE ON HOW TO SET-UP X360CE WITHOUT ERRORS FOR PC 2021

[@liquidweird6055]

This makes a lot more sense than most of the other vids about this. The others seem to expect you to already know all about it.

[@LuisJaimeLopesierra]

Asi es ya mismo intento

[@ngwafabrice9561]

ohh thanks man.. i tried everything and literally thought my game just wasnt compatible.. youre awsome

[@virtualarc3029]

👍

[@vetsununujnr]

Bro it worked finally it worked😭, i will subscribe like and share this video you earned it💯🔥

[@zechariahleal5365]

Thanks man. Simple and to the point. Everything I could ever want

[@arnelbilal2242]

i love you and thank you soo much man i was struggling but you were here and you deserved a sub

[@ayehebenezer2557]

Thanks so much bro................... good work done

[@DairuClintonB]

This video is a 💯 over 💯🥺🙏 after watching multiple videos 😔 thank you so much for the tutorial bro 🙏🔥

[@Darkside07543]

Bro your voice is so relaxing, i think it helpmed also in a kinda low anxiety attack, thx so much

[@virtualarc3029]

Nice of you to say. You're actually the first. People usually think I'm not loud enough.

[@mlandvonyawo4959]

Thanks a lot bro my ps5 fake controllers just connected and woking ✌🏼

[@imanolcarrasco3780]

Thanks so much !! Just straight to the point and effective! Cheers

[@MandeepSingh-qz7ks]

You are a game saviour man

[@stanleymugwagwa1636]

Thanks bro after hours of trying different things it actually worked now

[@urosblagojevic5400]

THANKS MAN THANKSSSSS, FINALLY AFHTER 6H WITHOUT SLEEP, C'MOOOOON

[@mwewalukonde3529]

had an issue of ghost controller and your tutorial worked with one try, Thanks a lot

[@Dinhminhquan3001]

I still have ghost controller, can you help

[@CromwellChamisa-je8kr]

Guy these things work thumbs up man ✌️♨️♨️

[@user-hl8qr1og4f]

You deserve a like 👍 good job

[@pigeontm]

really good video, i just have one question; how do you configure mouse movement for the right stick?

[@virtualarc3029]

Sorry about that, the right stick usually positions its self to the center while the mouse stays where its been pushed to, so the mouse cant really act like the right stick of a controller, even if you do configure it in some way you wont be able to use it.

[@pigeontm]

@@virtualarc3029 gotcha :( thanks for the reply tho, I've been going crazy thinking I was doing something wrong; now I can rest easy

[@gagnemalin3674]

Thanks bro from Ivory Coast, i was using Xoutput but it don't work for some game. Thank a lot!

[@DrunkenSailor69420]

Thank you for sharing this information with us, it really helped! ❤️

[@frankrichard2397]

Best

[@iadhfendri4574]

Thank you it works perfectly

[@mlspectators8781]

You're top G it really worked!!!!!!!🗿🗿🗿

[@AliMohammedHadi-hc8yr]

Good looking out✌🏾

[@mercee4097]

Thank u

[@hunterzolomon4472]

thank you so much man

[@bogsika9465]

Thank you bro it worked

[@davidandrew5762]

Thank you!!! now I can finally play Tekken with my son

[@TrenchkidCantona-rt3vb]

Thanks brother 🙏🏻

[@warsamaosman-Sool]

If you're using a fake ps4 controller 🎮 shut it off and plug in the cable it would work correctly. that's how If fixed my problem. I tried everything on this video and many other videos too but I accidentally turn off my controller and it worked what a surprise.

[@kumarprithvimishra2435]

what about the add Game option? its there in every version, but you don't seem to use it. Don't we have to map a game to this for the controller to take effect?

[@virtualarc3029]

@@kumarprithvimishra2435 I usually don't have to. It could differ for others but I usually don't have to.

[@Kenzki-fb9rw]

I made your suscribers 281 :D

[@stgaming3417]

Pliz help me when I use ps2 controller in pc using its converter In x360ce I have a problem The app is recognising left analog and d pad as same 😢😢😢😢 What can I do now I can't even keymap the buttons using both because it recognises d pad same to left analog by default But not facing any type of problem while using in android 😢😢😢 Plizz I need help

[@Kenzki-fb9rw]

i subscribed

[@Hasan99199]

Thanks It worked.

[@SuperLotus]

I can't seem to get this to work. I noticed there's an error listed: FCE_ArgumentException_80070057_20220830_191526.581145 Do you know what that means? I've considered reinstalling the program, but when I delete it and then unpack the file it has all the settings from before. I'm trying the new version btw. I used use the old version years ago before Steam had controller support. Now I'm trying x360ce again for Godfall on Epic.

[@virtualarc3029]

For this exception error it might be a missing requirement. Make sure the following are installed in your pc then try again. Windows Vista or newer. • .NET 3.5 (includes 2.0 and 3.0) - included in Windows 7. In Windows 8 and 10: Control Panel > Programs and Features > Turn Windows features on or off > enable “.NET Framework 3.5 (includes 2.0 and 3.0)”. • .NET 4.6 (includes 4.0) - included in Windows 8 and 10. • DirectX End-User Runtime (June 2010) - Required regardless of OS; .NET MUST be installed prior to the DirectX update. • Visual C++ Redistributable for Visual Studio 2013 - For x64 systems install both x86 and x64 redistributables

[@virtualarc3029]

Also try deleting x360ce data from program data in c drive

[@SuperLotus]

@@virtualarc3029 thanks for responding. I found out I could use Steam to Launch epic games for controller support, but I copied down your message into a notepad document in case I need x360ce for something else

[@virtualarc3029]

Cool👍

[@TEC-9.0]

Thanks man

[@reddhunterr]

helped a lot

[@mateimgv]

txh bro💪

[@abdullahdiallo2634]

Thing is I knew that but I rarely read the manual I like to do it MAnually

[@lurex8957]

The right stops working sometimes even after configuration it's also mixed with the a b buttons

[@virtualarc3029]

When that happens I usually just select the buttons manually from their drop down menu. There's usually an arrow by each side of where the button is recorded. Try configuring it manually from there.

[@manueljesusbueno2512]

Maestro, como se desactiva el mando una vez ya configurado todo, es para probar una cosa. Gracias.

[@youssefwalied6618]

i installed it but it still doesn't see my controller so what can I do ?

[@Danifer13]

do you know how can i configurate my ps5 pad button?

[@virtualarc3029]

Haven't tried it with ps5 pad. But am sure there are tutorial on youtube that might help.

[@kupakwashe7539]

Did the 360ce not work on your pc

[@gamingworldps5388]

How I fix the dpad and the left analog work the same function...and trying to weapons but not working plz anyone tell me how to fix that problem I m facing almost 5 months but no-one tell me how to fix that.....plz answer

[@faays6772]

I'm having a hard time! can you give us a file to import already configured with the Warzone keys please :)

[@juanfigueroa4989]

Is this compatible with The Godfather game (2006)?

[@FrannB]

Cool video, but, I dont have the 'Advance' tab, I can't set the Device Sub Type, the new x360ce version doesn't seem to have it, do you know a solution?

[@virtualarc3029]

Why do you need the Sub Type? I am sure the app can recognize your controller without it.

[@FrannB]

@@virtualarc3029 I need it to set my controller as a guitar hero drum controller, the Device sub type has that option

[@virtualarc3029]

@@FrannB That's a tough one. Am sure there's a solution but we just don't know it yet. I'll try to see if I can find something on that .

[@FrannB]

@@virtualarc3029 Thank you

[@joeslendeer75]

Can you help? My issues with the old version is that my button mapping isn't registered on controller 1 instead it's on controller 2, and whenever I tried to configure controller 1 and register the button it didn't do anything. Any solution?

[@virtualarc3029]

There is an option to select which controller to map to at the bottom left corner. It's labeled game controllers. I however think you should use the newer version cause it's options are more flexible.

[@davisthebroski3395]

I'm using a PS4 controller and whenever I try to map the buttons the input from the controller isn't detected even though the controller is connected Can anyone help?

[@Dinhminhquan3001]

when i started the game, there is a ghosted controller which means i use 1 controller but when going to kickoff there are 2 controller and i cannot use my left/right joystick because i press one and it happens twice. Waiting for your reply soon

[@virtualarc3029]

Which version of x360 did you use. It quite hard to tell the problem given that it acts differently for certain games. However, when I encounter a problem, I usually just delete the controller settings and try the reconfiguration again.

[@Dinhminhquan3001]

@@virtualarc3029 the latest ver

[@CommanderTato]

Dude, do you know how to make 2 generic controllers work? when i program them the second dodnt get recognized in second tab. they show 2 different virtual id but they share the original id. they are 2 physical different controllers with different cord and ports.

[@acehardstuck6256]

can i set up 4 controller for playing FIFA 23? or its just FIFA can't play 4 player local?

[@Master-hunter2000]

How can you edit the controller sensitivity mine is to slow

[@achilleas9153]

Hellow dude. I always have the same problem. none of the buttons respond, while he seems to recognize it the gamepad

[@lavie69]

How do I map my steering wheel, it is a little ties 3d cruiser steering wheel, I know it is very old but I am able to connect it to my tablet and play racing games so I want to try on my pc.

[@virtualarc3029]

To map your steering wheel, plug the wheels and brakes to your pc, then add them to x360ce interface by clicking on add on the right side of the auto map button. Select the device and then click add selected device. you then need to map the buttons as the steering, wheel, and brake. Map the left trigger as the front brake or reverse button and the right trigger as Accelerate button. Set the steering as the left stick while the right stick should be used as a view. Clutch, Gears, and brakes should go to X, Y, and A, B buttons. After setting it as per your need, you will see that the wheel will function correctly with the PC.

[@afiqalbawah4039]

my controller when i push the Right Stick (the aim stick) to the left my game receive it as shoot... and both L1, L2, R1, R2 was not functioning well.. this also happens in Need For Speed Heat... steering stick (Left Stick) need to push forward, if I press accelerate (R2) it goes to main menu... very annoying.. but in games like DMC5, Spiderman it works flawlessly..

[@sarahmano6286]

do you know how to add a halfway button? (for hitman absolution)

[@virtualarc3029]

well I've never really played the game before so i don't really know what a halfway button is.

[@FroZenGhoSt67]

so you can only use this with controller, but not with keyboad

[@virtualarc3029]

yeah.

[@Sharkistas]

Help! When I try to remap the keybinds, nothing happens when i press the button on my controller

[@virtualarc3029]

You have to ensure the app detects your game pad. For the newer version, beside to selects your controller before mapping. The older version should work so far as it's in the right game directory.

[@naryanr]

So does x360ce not have shift functionality? i.e. I can make [A] output [B], but when a trigger is held, [A] outputs [Y] ? Does it not have that ability?

[@Thoseguyswhogamealot]

What a guy 👏👏

[@virtualarc3029]

☺️👍

[@anon5660]

what is the add game for in x360 app?

[@DJe5567]

I was wondering this as well. I can't find any info regarding it. Did you happen to figure it out?

[@virtualarc3029]

Actually I think it enables you to launch games from directly from x360ce. Don't know if it has another function but that's what I've been able to do with it so far.

[@UchihaErick12]

Puedo asignar 3 botones a un solo boton con el x360Ce?

[@tiborrigo5667]

thanks sir my problem is when i push button A in game it acts like i m pushing A and X at the same time also if i push Y it works like i push A and Y

[@virtualarc3029]

Sorry for replying so late. If you still have that problem, Try deleting the button configuration file, launch the game, then close it and re-enter where the button configuration file was. Reconfigure it again and see if it will work.

[@aleksagrbusic81]

Hey man,can you please help me or give me some type of advice.My 360ce started going crazy messing up all the controls after i added a game into it and i cant seem to fix it.I tried deleting it and downloading it again but all the messed up stuff stayed the same,is there any way for me to reset the app like its a brand new one?

[@virtualarc3029]

You need to delete any visible traces of the app from your local disk and in %Appdata%. That may help reset x360ce

[@austinnixon3963]

I never get the new device detected pop up, tried a bunch of times

[@virtualarc3029]

sorry about that bro, if you are using the new version, all you need to do is add your device by clicking on the add device button at the top right corner of the controller 1 page. doing that should activate your device on x360ce.

[@Svarun93]

Still have the problem. Using new one. All set according to video, then in-game in menu, random skipping through the menu....

[@virtualarc3029]

It's kind of wired how similar software settings can behave differently on different machines. Does it behave that way in all your games?

[@Svarun93]

@@virtualarc3029 well FIFA2019 is the only one I have to use it. All the other games I play have the native support for it… :/

[@twocoinz8531]

Bro please help me mine Says failed to load c:/ windows / system 32 / input 3 dlll etc what can I do

[@SammyAOE]

I'm using for all games version but when I try to add my controller it only shows my keyboard and mouse. help please

[@virtualarc3029]

I think the better solution is to use the older version since you don't have to worry about adding your controller before playing the game. All you need is to configure it.

[@AbhishekMishra-qm6el]

Error calling setup device registry property. What ot do

[@MARTmINZ]

How do I solve the Unhandled Exception error

[@anon5660]

i was playing witcher 3 with the controller and it suddenly stopped working. it's connected to my pc but wont work in game suddenly

[@dsadsq6938]

How do u fix whenever u turn left or right it will just start spinning ur screen, PLEASE help!

[@virtualarc3029]

That's kind of a blank for me. It mostly happens for 3d games and my guess is that the game is recognizing the analog as a mouse.

[@_fiqqo]

im using the new version and had no problem when mapping the buttons, but when i open a game (gta iv, fnv), the right thumb stick is wrong. when i push up, the camera goes left, when i push right, the camera goes up. Do you know how to fix that

[@virtualarc3029]

I've seen this before. Try swapping the configuration in x360ce. For example configure the up movement of the right analog as right and the left movement as up. Took a lot before I could solve this so am not really certain if this will work. So just try swapping the configuration of the right stick in x360ce.

[@myfartsotart3191]

Works pretty well but i'm having a problem where steam games try to use my original joystick input as well as the new 360 controller input. I'm assuming its trying to use the xinput and Direct input at the same time? This leads to one button doing multiple things. Is there a way to fix this?

[@virtualarc3029]

I thinks the problem is because both steam and x360ce are running at the same time. Be sure to run one at a time even in background. Always check task manager to be sure only one of the two apps is running.

[@myfartsotart3191]

@@virtualarc3029 Will x360ce work if it’s not running? I think steam has to be running while running the games, but I will check later.

[@virtualarc3029]

Right click on the game and go to properties, then set steam controller support to "forced off" that should help disable controller configuration in steam when using x360ce.

[@myfartsotart3191]

@@virtualarc3029 Yeah that wasn’t working, I tried that and also tried completely hiding the joysticks in the steam controller settings and yet somehow those games found a way to use them. I’ve been working on this for hours today and I am stumped as for how to fix this.

[@virtualarc3029]

Well, if the game responds to steam controllers properly, I think you should only use x360 with non steam games.

[@gyamahemmanuel7119]

How do you connect two gamepads

[@rainaraymond704]

Why my controller shows the red dot and yours show green dot?

[@virtualarc3029]

If your talking of the on the controller tab. It just signals whether controllers is connected or not.

[@asdaddsddsad]

It crashes whenever i check the "Get Xinput State". It used to work before, but after i bought an SSD to replace my HDD i have that issue :(

[@chapellennamami8060]

Bro me too😢 Did you solve yours ?

[@asdaddsddsad]

​@@chapellennamami8060no, i gave up on it, i'm only playing on steam now, which has a tool that allows you to play with any controller

[@Hanxngl]

The part where you get "New device detected" doesn't pop up to me

[@virtualarc3029]

I think you can solve this by deleting all traces of x360ce configuration on your pc. Delete from the game directory, temp file in appdata and drive c. Then try it out it again.

[@adamclark4229]

Dude no matter what i do i just cant get it to work i give thee fuck up

[@abdou_uu5825]

I followed everything step by step but when i run cuphead the controller doesn't respond and i only can play with keyboard and mouse even tho it's linked, i'd appreciate if u help bro

[@virtualarc3029]

Found something that might help. How ever this is a temporary fix and you will have to do this everytime you launch the game. Follow this link below: kzbin.info/www/bejne/eX2VZpd5pcR_npo

[@gerdahilto6602]

not worked, try to remap but it doesnt do anything

[@DairuClintonB]

Bro I made a mistake by clicking remove 😞 how can I restart it?

[@virtualarc3029]

With this one. You have to delete the .exe, .ini and the xinput file, then extract and reconfigure.

[@quortez_zm1060]

In dead space 2 my camera keeps rotating? Help

[@klabifortune147]

I used the 32bit for my 32bit game and it gave me an error. Something about a ".dll" file was not found. Any help please 🙏

[@virtualarc3029]

X360ce should prompt you to create dll file which is also the xinput files when you launch it for the first time, provided it's the right version for the game you are trying to play. If not, go to game settings tab and create the dll or xinput files. Refer to the video to see how to create the files.

[@nyobachanel4859]

where wrong Xbox 360ce setupdigetdeviceregistryproperty w:122

[@abhyaskandagatla263]

When I open it I don’t see the enable 1 mapped device option can anyone help?

[@virtualarc3029]

You need to have you controllers pluged in first before you see enable I mapped device.

[@abhyaskandagatla263]

I have but I fixed it I was using the 32 but instead of the for all games

[@abhyaskandagatla263]

The Pxn v10 steering wheel only works with that for some reason

[@abhyaskandagatla263]

@@virtualarc3029 thanks for replying too even after 1 year.

[@WTFable]

x360ce is crashing as soon as i start it, please help.

[@virtualarc3029]

Please try using all the versions.

[@itoshibeat2303]

giv the wallpepper

[@myfartsotart3191]

Hey dude! I actually fixed the last problem I was having it was something about the Dinput file being turned on. I had to download a version from 2020 though and now x360ce doesn't switch profiles on its own. Like if it is on the default profile and I open up a game, it doesn't automatically switch to that games profile. I had it set up to do that on the last version so I know there is a way, I just don't remember how, and thought you might know the answer.

[@virtualarc3029]

now that you've mentioned, x360 uses xinput and steam uses Dinput. maybe you just have to make sure they both used the same input so that they don't conflict. i dont really know but try enabling dinput for x360ce and disable all xinput options in x360ce.

[@myfartsotart3191]

@@virtualarc3029 I was actually just thinking the same thing while I was driving earlier! I will try that for sure. Do you know how to make it automatically switch between each profile when I open a different game?

[@virtualarc3029]

That is a mystery. But let me see what I can find. Then I'll let you know👍.

[@myfartsotart3191]

@@virtualarc3029 any updates on how to fix it?

[@virtualarc3029]

@@myfartsotart3191 are all your games steam games.

[@fantomgaming1358]

when I opened x360 my keyboard disables and it crashes when my controller is connected

[@virtualarc3029]

You could try messing a bit with the comparability settings for the x360 app. Your problem sounds kind of complicated so I would recommend you maybe use steam. It also very good for playing games on pc.

[@odutayoabdulrahman]

Hi My software is still having issues which I'm in able to solve it Please help man

[@virtualarc3029]

What's wrong?

[@waledare6124]

Hello I keep getting an error message "unhandled exception has occurred in your application....... Error calling SetupDiGetDeviceRegistryProperlyW: 122

[@virtualarc3029]

As much as I'd like to help, I've never seen this error before. But I'll try to see if I can find something on it.

[@waledare6124]

@@virtualarc3029 it's all good Installed an older version of x360 then updated it via the app It worked

[@virtualarc3029]

That's Good.

[@raven_themechanic]

frezzes up everytime on win11

[@GamesforCykits]

Didnt work, controller still not picked up in game

[@virtualarc3029]

Which game are you trying out?

[@AgyeiOwusu-wx4re]

I did not got the notification

[@virtualarc3029]

If you already have the xinput file in the game directory, you won't get any notification. If you want to see the notification you have to delete the xinput file in your game directory.

[@critikasalihmeylani]

There is no 'Issues' section for me. I tried looking at the 'Help' section, and it told me to install two Microsoft Visual C++ versions. Am I doing this right?

[@virtualarc3029]

It might be an update. Skip the issues section and try continuing the configuration.

[@NotEvenDeathCanSaveU]

This bugged piece of garbage does weird things, constantly switches my game when trying to add new controller wtf

[@virtualarc3029]

It does have quite a problem when it comes to multi controller configuration. Just try to keep it to two controllers and don't switch usb ports of you game pad. Just keep it in one port and always use that.

[@theFlynnster4906]

nothing works i tried so many times and raged even more and i still dont know how to do it!!!!!!!!!!!@

[@virtualarc3029]

Aww, very sorry for that. But I think you should try with a different controller if you haven't. And just so you know it's not totally compatable with all games. But it mostly works with the good ones.

[@theFlynnster4906]

@@virtualarc3029 Thank!

[@emmanuelmoncada8158]

where are the links?

[@virtualarc3029]

Sorry about that. Thanks for the notice. Totally slipped my mind. I'll try and add them.