Full Off Grid install 6kw Inverter and 15kw Battery - Big Battery Rhino 2

[@GavinStoneDIY]

The inverter only needs one of the battery cables each. Even that is over kill. Since those cables are 2/0 and you really only need around 1awg cable. So you could install some lugs on there and remove 2 of those. Love these 6kw units. They are solid

[@jllaine]

Your power projects have been ambitious and impressive. It's amazing how much they are gifting you in gear for all this.

[@LandtoHouse]

Thank you. Yes. It's surprising how fast companies will send power equipment when you start making videos.

[@bradmesserle999]

I would have opened the other hole for the negative. Putting both in the one conduit seems shady.. yea these systems are getting pretty darn good.

[@LandtoHouse]

That is a valid point. Opening up the other battery cable hole is a good idea. This system has been running over a month with zero problems. I have not dropped the battery below 85% full.

[@bradmesserle999]

That is sweet. Besides money it is really homeowner friendly now.

[@randya9143]

I was glad to see that you put all the cables in connectors going into the inverter, bare cables going into metal cases worry me ! These batteries come with two cables for both positive and negative for the larger inverters like the 18k, you only need one for the 6000. No worries until you want to add an additional battery, and then the angle of the connectors on the battery will be a problem for the parallel connection cables. Just FYI, that big battery is exactly like the EG4 brand that is sold by Signature Solar and Current Connected. One more note is that the battery is a 14.3kw, not a 15kw.

[@cowboy777120031]

First one keep up the good work love seeing your videos

[@LandtoHouse]

Thank you. This system has worked very well in the shop.

[@AHMEDGAIUSROME]

THATS A BIG BABY !

[@ChatterontheWire]

no groments for the battery up into your wire box for the positive and negative? Seems sketchy having those feed up through those cut outs long term if they shift and rub against the metal of the box to potentially cut them long term. With that said though, nice setup overall.

[@toughguy1999]

Did I miss the links you described at the beginning of the video?

[@alan72688]

Are you switching the neutral and ground? Should you be?

[@edc1569]

How much energy can your 15kW battery store?

[@tomduncan3547]

Did you have proper isolation with the positive and negative leads going through the metal box of the inverter.

[@LandtoHouse]

You make a good point. I will separate the battery cables so that they go into separate holes in the inverter.

[@Foxfried]

I thought EG4 made this battery? Is it really made by lux power and EG4 and BigBattery rebrand it?

[@LandtoHouse]

The inverter is a lux power. Eg4 rebrands it and ads some breakers. The battery is the same. Bigbattery and eg4 both have a model.

[@turnerhayes5303]

need a ferrule for that stranded wire

[@LandtoHouse]

Those are not standard in the USA.

[@chojthoj08]

What is the max voltage per 1 mppt? Is it 385v or 480v per 1 mppt or is it half between the 2 mppt???

[@randya9143]

On the 6000xp, each pv input is 460v. I used ten of the 400w/37v panels on each input on my inverter.

[@chojthoj08]

​@@randya9143I see. Thank you 👍🏼

[@bullithedjames937]

Conduat box no spaghetti box

[@eliazarvela1981]

No mention of CT’s?

[@bullithedjames937]

@@eliazarvela1981 cts