Full powertool repair, Makita HR3000C hammer drill teardown and repair.

Makita HR3000C hammer drill is running but not hammering.
Full teardown needed to replace the disintegrated bump washer inside the hammer pipe.
You can check out the flexispot sale here
FlexiSpot Sept. Sale-Up to 76% off
Sale - bit.ly/3ZmXQjn
And the E7 Pro desk here.
E7 PRO - bit.ly/47wFONz
#flexispotuk #ad #e7pro #standingdesk #makita #toolsrestoration #fullrepair #teardown #fullteardown #hr3000c #tools #diy #powertool #repair #repairs #deandohertygreaser #powertools #toolrepair #makita #deandoherty

[@UnCoolDad]

Congrats on the sponsorship. Pity you didn't get one from Guinness 😂

[@deandohertygreaser]

Maybe one day!

[@gerard_3864]

Probably for the best they didn't 😂😂😂

[@GablesDude]

Hahaha. Funny, but congrats!

[@zaxmaxlax]

Do the Irish drink a pint of guiness everyday? 😂

[@UnCoolDad]

@@zaxmaxlax they would be malnourished if they didn't!

[@jasonvandervalk3679]

I definitely agree that desk is solid i like its almost like its bolted to the floor. Quality sponsor for Quality work.

[@thedogbarber]

Good job on the sponsor. I'm sure some will give you flack for it, but not me. You work hard here for this channel and youve earned it. Just be sure you always let us know when something is sponsored, which I'm sure you will do.

[@scotttipton1000]

Where could I purchase the flick out hex keys you use please? They catch my eye every time you use them. Cheers Scott.

[@gerard_3864]

I second that question, I think wera or a set of wiha.

[@kellytaylor3134]

Ebay £34 just put in whia Allen keys

[@kellytaylor3134]

*wiha

[@deandohertygreaser]

They are the wiha egostar keys. This set is the magic ring set. Get the ball end ones unless you need to hold the bolt on the end of it

[@scotttipton1000]

@@kellytaylor3134 Think they are called Ergostar. Thanks 👍

[@capk387]

Flexispot desks are awesome, have two and they would make excellent workbench

[@leonardpaciora5039]

Thanks as usual Dean! How about doing a video on what grease to use on what?

[@bobdickweed]

Bosch Heavy Grease

[@Bagels-k9f]

In the big time now Dean with the sponsorships! Good man your videos are great and deserve the attention. Thanks for posting I always look forward to your videos

[@deandohertygreaser]

I appreciate that! Thanks

[@michaelflynn6178]

Congratulations on the sponsorship Dean good to see you doing well Thanks

[@deandohertygreaser]

Thanks 👍

[@tomthompson7400]

Always nice to see things coming back to life

[@MichaelNazar]

Great sponsor. I have switched to a fully adjustable desk. I mainly service computers now, and I can state that these adjustable desks make a world of difference. Especially when it comes to lifting tools or computers that can be +20kgs. Set the desk to its lowest setting, put the rig on the desk, and then raise it to your working height.

[@Kzaerlol]

Sponsors dont affect people until the video quality might degrade. Im making the assumption (which is wrong) that everyone uses autoskips for every ad and inscribed sponsor.

[@Bugsyerin5646]

Hell man the way you clean is just manic. Thanks for rhe video like the Wiha tools.

[@deandohertygreaser]

Glad you like them!

[@andrewclough660]

I will be talking to my boss about that desk. very cheap option thanks

[@Dr_V]

Nice desk. I give it about a month before the top starts looking like it's 10 years older than the rest, but the structure itself looks like it's gonna hold up for a good while longer. Actually it'll be a great stress/endurance test for that thing, as it's not really designed as a work bench and definitely not meant for holding big crusty power tools dripping grease, dust and dirt all over while you take them apart.

[@chucknorris2952]

is amazing how you remember where every part sits, and what orientation!!!

[@philgallagher1]

More merch, T-shirt, hat etc: "Now... What'd be wrong with that?"!?

[@capk387]

Tartan flannel tee shirts with massive oil stain from and rear- got to be an awesome idea

[@robodinosaurs]

Dean, what’s the allen key drill bit you use in the bosch drill? and where did you get it? i want one myself

[@harpo7226]

Great vid, the table looks great crack and not a bad price.

[@daverichmond2846]

Well done. You deserve success.

[@georgedavall9449]

The Man, The Myth, The Legend! Dean Doherty!!!!!!!!! Congrats on the Sponsorship old man! Don't ignore us wee people now! 😆 Cheers!

[@irishrebel1976]

I need that table. It’s so hard to work on projects because of my bad knees. I have to keep switching from standing to sitting just to be comfortable.

[@MrBostonBilly]

Congratulations, nice to see someone's hard work payoff. Watch u all day while I'm working, it makes my day go bye a little faster

[@Lanefasts]

Congrats on the table upgrade!

[@yyycma3]

Why is it so satisfying to hear the two halves of the machine click together?

[@alvalle1206]

Congratulations on the sponsor. Always a treat to watch the repairs . Nice stand up desk as well.

[@_droid]

That's some serious (dis)assembly skills. Like watching a line worker with more jewelry. Great! That's a really light colour grease. What is it?

[@jasonbuckler190]

Great job. Finding the other things will make your customer happy. Good desk too, not sure of the lifespan in your shop though, but sturdy as heck!

[@darylhudson777]

160 kilograms = 352.74 lbs. Capacity... that is an awesome desk I'd love to have one I just don't have the funds right at the moment but I'm going to keep that in mind what a blessing that is for my Dear Brother Dean another answer for my prayers to bless you 😇👍

[@chadbenner6316]

I am a new subscriber and I would like to say thank you for the excellent content( I have found myself watching hours of your videos). As a technician with more than 30 years of turning a wrench and repairing electronics, I do have to say that your troubleshooting and diag process is relentless. In my experience you cannot teach what it is that you do at least not in the way that you do it. I am certain that the sheer volume of experience you have has benefited you tremendously, but the aggressive manner in which you approach each fault is remarkable and the machines do not stand a chance. No way anyone develops to your level without an longstanding passion for what they do. I hope these manufacturers are paying attention to the things you say and your audience will be inspired to actually give repairing an item a try instead of blindly consuming the highly marketed junk that is being produced today. Thanks again Dean!

[@andrewrits3536]

I’m loving this channel my favourite keep up good work dean can’t wait to table saw been worked on the new table maybe next vid ?

[@Stevos-Corner]

Gday Dean congrats on the sponsor mate. That desk looks great. Rig up an arm with a holder on it for your camera and it would be great for when your showing us how to repair those drop saws. Instead of using one hand like you always do. Good on you mate.

[@niaimack]

You use a phone to record? You could get yourself a bluetooth shutter remote for the phone, would save your thumb at the parts washer.

[@asbestosfiber]

didn't put any lube on the shank of the bits. That's impressive that has lasted so long with that kind of use

[@christopherrobinson4421]

Awesome Dean!

[@johnmclaurin]

I would never get it all back together! Joy to watch!

[@roger10coutinho]

Genius. Not a single screw left. Genius I say!

[@fredholmes6284]

Al say it f'ya Dean.. THAT'S HER..😅

[@willtricks9432]

Many of these breakers still going after so long. Cheers

[@plunder1956]

The ability to raise and lower jobs to work on them should prove very useful, stripping down chop-saws etc.😀 Have you considered using a gravel tray when stripping a tool down. It minimises items rolling off the table.

[@glennkamers]

Maybe put a protective cardboard layer on the desktop. Those rhings mostly used to out laptops on 😂 Great sponsor btw, im looking for one of those desks myself. Trying to get my company to pay for it.

[@deandohertygreaser]

Yea, thinking of getting some more lino for it

[@rodpatient9]

My thoughts exactly - get the company to pay for it... and then I remembered, work for myself 🤣 Now where's my debit card?

[@jernejloknar8011]

Love how the comments are all supportive and happy about the first sponsorship! We're all proud of you!

[@stevejagger8602]

Thanks for this sponsored video. The Freespot table looks excellent for your needs - however I wouldn't try jigsawing into the edge of that table!

[@deandohertygreaser]

Good call!

[@pitcull1046]

A sponsorship deal that you are actually using/abusing, hands on, on a daily basis, brilliant.... Keep up the good work

[@felixcosty]

Want to see how long the desk will last in a workshop environment compared to an office.

[@ianmurray3820]

“GLOVES”…!!!!!??????

[@ElMariachi1337]

Gratz on the sponsored video! And a nice teardown as usual.

[@deandohertygreaser]

Thanks!

[@Drottninggatan2017]

Now we want to see you drilling into the new table. Baptise it!

[@zaxmaxlax]

I wish my relationships were as stable as your new desk 😂

[@shaktisingh5543]

Congrats Dean! Love your Vids ❤ So what will you use your Desk for? Show us something whenevr you Can ❤❤❤❤❤❤❤ Okay saw it later after I commented 😂😂😂

[@repairs524]

Absolutely great desk but at 700 Euros a bit on the costly price

[@prasadvn524]

Very nice stand indeed.Hope this will be useful.

[@dusanmilojevic3017]

Tool holder goes faster than brushes on those models.

[@timtimtim5294]

That is a nice desk !

[@vincentsolon3216]

how do you know how to repair this tool?

[@deandohertygreaser]

i repair tools for a living

[@matt8906]

first

[@deandohertygreaser]

where you sitting waiting for it. its not even finished loading for me.