Full QA1 coil over OBS Chevy suspension install completed. Its a work of art!

Killer Performance gets the chassis basically rolling! Next up is engine install and wiring. This should be fun. Merch link: street-car-tak...
Social media:
Facebook: Stangkilr productions
Instagram: justinkeith_sct
Tiktok: Keithallen
Wear what we wear:
street-car-tak......
Killer Performance KC
www.killerperformancekc.com

[@StangkilrProductions]

LT4/10spd install NEXT!!

[@detroithammer8869]

that would be a hell yea from me

[@BoogersMechanics]

Should’ve named the Truck “Mona Lisa”, Cause she’s turning into a Work of Art.

[@StangkilrProductions]

The truck really doesn’t have a name yet

[@AbundancePlus]

@@StangkilrProductions ✨L teal 4✨

[@StangkilrProductions]

Omg! I love it!

[@krishiatt7203]

Justin did not spare any expense on this build. The further along you guys have made, the more exciting it's becoming. QA1 for the win!

[@johnmoniz2715]

I give u SOOOOO much credit on this build cause there’s just sooo much ordering that people don’t even understand to have everything new!!!

[@mattdavis9335]

Anyone wanna count how many times he says “this is a really nice kit”

[@StangkilrProductions]

It’s a really nice kit

[@mattdavis9335]

@@StangkilrProductions super nice truck. Love the build

[@Fl1n7V3n0m]

If it's the same level 3 kit I want to put on my OBS and sway bar, for $6000 for the kit and bar, I'd be saying the same thing in repetition. Lol

[@billy.1110]

Hope to see this truck at Street Car Takeover OKC this year.

[@QA1TECH]

Looking good, guys! 🤘

[@detroithammer8869]

imho, worth every dime. i know perfection ain't cheap

[@michaeln.7083]

I like the calipers black too.. it makes it look more factory and cleaner then bright yellow or something crazy.. that's gonna be such a badass truck!!

[@automotiveoutburst8946]

This is going to be the world's cleanest OBS!

[@donbooze9379]

I love this build! I grew up riding around on the bench seat of my dad's rclb obs. It was the first vehicle I drove on the street, when I drove home from the DMV after getting my learners permit.

[@bobbyemerson46]

When this truck is done,she will be the very best obs on planet earth!

[@Rocketman1000R]

I ordered both the QA1 Stage 3 suspension kit and the Little Shop 14” Willwood brakes F/R in Infineon blue. Thanks to you guys. I need a build sheet from you guys. Lol

[@pjt-kl7mb]

I will start next month on my 74 chevy c10 stepside I'm very excited to see the new aq1 front and rear coilover suspension your truck looks awesome

[@rickscott6239]

You're definitely not cutting any corners when it comes to cost, but it shows in each and every way. Just the frame alone is a work of art, let alone what the finished product is going to look like. It's definitely beautiful and I'd bet it's going to work even better. Yes, the stopping power should be insane and so smoooth ! Can't wait to see the mill dropped in and the rest that follows. I can see why you quoted what the final cost was going to be. Too bad you won't be able to see most of this, but that rear end will be visible and that's a work of art in it's self. Keep on trucking on ! 😉 💯 😎

[@grumpy1962R]

Where is the link to the next episode I wanna see that big block sitting in there. That was my choice as well looking forward to my build.

[@henryg683]

Looks like the chassis is going together nicely!!!! I like what I see!!!

[@ride_nebraska3787]

I heard Mac and Logic in the background, shop music on point 👌

[@trevorsmith9251]

Great to see the results when you plan well and have the budget and staff to make the dream a reality 🔥👌

[@Fbodylobby]

Excellent work 👍

[@jonkeidel4084]

Love watching ur channel, can’t wait to go to the track with all your new toys!

[@lionworkz7564]

Awesome build! I'm doing a ground up build with the qa1 suspension also Was missing the same suspension parts as you guys as well Too 😀. Loving the content!

[@Vaca1950]

Calling it now. It’s gonna be a giveaway/March grab truck.

[@StangkilrProductions]

Maybe another truck. Not this one

[@chriscase6341]

Love it!

[@joshjammer5716]

Badass built!

[@ClarksAutoAndPerformance]

I wish I could do a build of this level!

[@jabenross4628]

Fantastic!

[@Mr_Ruhl]

"Mother of all" bolt on build.

[@StangkilrProductions]

That’s what makes it cool! Anyone watching can purchase the same parts and do the same stuff.

[@SavageProductionsCars]

Loving the build! I know you were joking about getting the engine put in already, but you should definitely mock it up with the transmission to measure for a driveshaft, seeing how nobody can get one in a reasonable time these days. I'd hate to see the project held up for something like that!

[@StangkilrProductions]

I can get driveshafts in 1 day now

[@SavageProductionsCars]

@@StangkilrProductions oh nice. Local shop or elsewhere? I haven't heard any updates from my dad on his availability of driveshafts from his suppliers. I thought they were still hard to get.

[@johnminer204]

Awesome build! I missed the 10 bolt parts list and cannot find it. What is being done to help with the LT4 power? Thanks!

[@minitrucker04]

Love the build man

[@timtaylor6147]

Steve Those left hand threads on the tourqe arm giving you a hard time bud ?

[@BoostedMarcelo]

You’re going to need some mirrors around the truck to show off the bottom for car shows

[@BaselineCarChannel]

All I want to do is to have business as successful as justin has, being able to bust this kind of projects

[@bagramfacilities]

Can’t wait for this project to be completed. I already talked to my broker at TD Ameritrade about which fund to sell for purchase Justin, 🤨

[@justinme8175]

Can we get a part list with part numbers for all suspension parts

[@clangdon1436]

This is going to be an awesome build . Quick question. Why did you leave the rear spring hanger . It sticks out like a sore thumb.

[@StangkilrProductions]

Going to use it for exhaust hanger

[@KamronLsx]

Surprised you didn't do a 12bolt or 9in

[@StangkilrProductions]

These 8.5 10bolts can take a beating with the right internals.

[@nickt1301]

Whats the widest rear tire u can run I feel like the location of ur rear coil overs takes alot of space away from how wide of a tire u can run

[@StangkilrProductions]

I can run a wide enough tire that if I go any bigger it will not fit in the wheel well. Shock isn’t in the way

[@derrildyejr.1438]

What brake kit did u use for the front and back and do u have the part number and did u use the stock rear end housing and axles

[@midnightc6664]

Badazz man. Sema build 😎

[@mark197508]

this kit would of been perfect if shocks an lower control arms was mount inboard of the frame to mount even wider tires

[@albertnickles3287]

Question I'm putting on the same Qa1 upper and lower control arms with the 2 1/2 " wilwood drop spindles. How did you guys compress the upper and lower control arms together to be able to put on the drop spindles and screw them down. I have no engine just a frame like you guys. I'm on a stand still. Would love your feed back. By the way beautiful build.

[@cellini8700]

hoping you let cleeter do a heater in this bad girl

[@nelsonp5187]

Is that kit only for 10 bolt rears?

[@daltonholley5659]

How did you guys compress the coil overs and attach the spindle with no engine to weigh the frame down, I’m doing the same on my s10 pickup and I’m stuck, thanks

[@jpbc4]

oh I know you're not going to leave the calipers black!!!

[@rampena9426]

Will this be at LonestarThrowdown? This is literally the direction i was going with on mine...Im stuck between this Qa1 coilover kit or RideTechs. Would love to see this build

[@StangkilrProductions]

It will be yes

[@l2azorback]

Do you plan to Safety Wire your rotor/hat bolts? I would....

[@greghuff343]

You should have cut that rear leaf spring hanger off.

[@dltnellis]

TEAL IS THA DEAL!!! is the LT4 stock other than the colormatching and headers?

[@StangkilrProductions]

Cam, lower, upper, and ported blower/103tb

[@mam346]

Will this truck be in Atlanta May 8th?

[@StangkilrProductions]

100%

[@MrWhiteford44]

What’s with the rear leaf spring hanger?

[@The_Drive_Inside]

Hey I’m in Des Moines... would you guys take on a cam/tune for my 19 SS 1LE?

[@StangkilrProductions]

Yup! That’s our bread and butter

[@The_Drive_Inside]

@@StangkilrProductions hell yeah!! Where can I find you?

[@StangkilrProductions]

Look in the video description. Has all the ways to get a hold of me. Thank you!

[@eldelachevyblanca6197]

I got the same suspension kit for my obs and for some reason it rides really bumpy is that normal?

[@fucklife307]

How much was this build if you don't mind sharing that info ?

[@joe978]

What's up with the rear leaf spring mounts on frame are they going to be used or was it overlooked....

[@StangkilrProductions]

Using them for the exhaust. Wait and see

[@TeLaComes713]

Can I run that QA1 with a 12 inch reverse lip and shorten the rear end?

[@StangkilrProductions]

Possibly!

[@MarcoGonzalez-pv1dz]

How much was the kit

[@nbsted]

Does it have a roll pan? If not you should get one

[@nbsted]

Also, liking the longer videos

[@jakesmith7503]

So I know you broke down it’s 75k build, you mentioned 100k to sale. I don’t have that kind of money, I’m just curious how you get to that number, I’m not saying it’s over priced I literally have no clue, I’m just curious with your train of thought on it, just looking to learn a little bit.

[@StangkilrProductions]

75k MY cost and MY cost on labor being that I own the shop. It’s also not even done yet. I bet I’ll be another 8-10k in stuff before it’s all said and done.

[@TheTexorc1st]

What all is done to the 10 bolt to hold up against all the power? I know you mentioned its a truetrac carrier, but what axles and/or other mods are done? Just seeking info for my own swap.

[@StangkilrProductions]

It’s got the Yukon brand hardened axles, Eaton diff and Yukon gear set. C clip eliminators too

[@TheTexorc1st]

@@StangkilrProductions Gotcha, thank you!

[@nealfox1976]

Are the rear leaf spring hangers used for anything?

[@StangkilrProductions]

Going to be used for the exhaust

[@Kuhmar24]

Hey Justin what wheel studs did you put on this truck? I need some longer ones for mine.

[@StangkilrProductions]

610-509 Oriellys part number

[@Kuhmar24]

@@StangkilrProductions thanks I appreciate it

[@xxkiller59xx]

Did this gain or lose weight ?

[@StangkilrProductions]

Stayed about the same

[@joshuahalford4071]

Better be nice for 4K 🤷🏻‍♂️

[@StangkilrProductions]

I have spent a lot more and got a lot less before. The Ridetech kit is 2k more.

[@joshuahalford4071]

@@StangkilrProductions I plan on getting the same kit you got for my 97 I got from my poppa he bought it brand new in 97 and I just wanna make it look new and low with a good ride so I definitely think I’m going to get the same kit as you can’t wait to see it finished keep up the great work 💯

[@PORTHUDSONBOUND]

How do you determine what qa1 suspension kit you need for your OBS? @stangkilrproductions