Now I know why my derailleur is not shifting precisely, its because of rust deposits on the metal spring. This video really helped me a lot! Kudos to you mate!
@mtb7172 жыл бұрын
Thanks! Nice to hear that.
@Kratos-zm7hz2 жыл бұрын
Thank you so much for this demonstration. I was completely terrified at the thought of doing this by myself. Now I have a little more confidence 😅
@mtb7172 жыл бұрын
Thank you! Glad to be helpful! You will succeed
@ryu_f Жыл бұрын
Great video, helped me out to do maintenance to my own derailleur 👍
@mtb717 Жыл бұрын
Thank you! Glad to hear that!
@guilhermecardoso9253 ай бұрын
Thank you so much. From São Paulo, Brazil...
@TheMartinchostar Жыл бұрын
Stunning job, never seen something like this before. Tiny parts disassembly, surgery accurate precission required to make it the right way. Well done!
@mtb717 Жыл бұрын
Thank you very much! Subscribe for more videos please
@DMack-rm6gi2 ай бұрын
Perfecto... Muchas GRACIAS
@robertbarton993 Жыл бұрын
Very detailed video. Thank you so much. Now i'll try to disassemble my RD 😁
@mtb717 Жыл бұрын
Thank you and good luck 👍
@inwestua747 Жыл бұрын
Good job! Thank you very much!
@inwestua747 Жыл бұрын
Nice job! Keep do it! Waiting for new videos
@tiagobel2 жыл бұрын
Excellent video! thanks
@mtb7172 жыл бұрын
Thank you very much!
@markjmaxwell9819 Жыл бұрын
Much cheaper than XTR and the jockey wheels can be replaced with XTR bearing jockey wheels... If l was going to upgrade or do a build this derailleur and a two chainring crank would be on top of the list. FANTASTIC value.......😃👍
@mtb717 Жыл бұрын
Agree with you
@tipsntricks1477 Жыл бұрын
thank u so much for this video can do more of this like fixing shifter/shifter indicator like that it'll help a lot of newbie bikers to save money like me thank u
@mtb717 Жыл бұрын
Thank you for watching! ❤️❤️❤️ Nice to help you
@candidoibarra9127 Жыл бұрын
I like to see todo el triperio all the parts of this single side is a lot of things to remove and putting back again, when I check my trek 3500. In the lands where I from, are dry and the dust rise from one side ends on the other side and that condition bring problem to ours bicycles specially this small thing but this video help me a lot, I enjoy watching, have a nice travel. I still learning this language i hope my words had been adequate I don't mind to hurt anyone
@mtb717 Жыл бұрын
I also like it! Thank for watching and nice to meet you on my channel!
@jullyjohnpanuelos3004 Жыл бұрын
Nice video very helpful ❤
@mtb717 Жыл бұрын
Thanks 🙏🏼
@senseisnotcommon453511 ай бұрын
New subscriber here. More servicing vids please!
@mtb71711 ай бұрын
Ok! I will. Thank you very much
@monchzaw4383 Жыл бұрын
nice
@jgbarre Жыл бұрын
You must be good at jigsaw puzzles!!😮😮
@mtb717 Жыл бұрын
😅😅thank you!
@dawbool955210 ай бұрын
Thanks for the detailed demo. Shouldn't the bolts holding the pulleys in the cage be treated with some thread locker before assembly?
@mtb71710 ай бұрын
Yes
@jasper5945 Жыл бұрын
shouldve recorded the cleaning process too.
@the__________ Жыл бұрын
I just got the 5100 groupset. Gonna save your video for when I need to watch this again lol.. How many miles with easy trail riding do you suggest doing the service?
@mtb717 Жыл бұрын
Thanks you. 1 year of riding. But if you often drive in the rain, you need to service it earlier
@DM-hw4cr Жыл бұрын
Waay too much work to keep a derailleur working. Just got slx 12 spd this year and was surprised how high maintenance the rear mech clutch is. Never have to deal with this using sram eagle.
@mtb717 Жыл бұрын
Yes, agree with you.
@user-lm8jl6nl1t5 ай бұрын
How can be remove that little spindle 3:16 if it stuck, what will i do to remove it? Thaankss
@AlexMTBVLOG3 ай бұрын
Its ok, you didn't service the jockey wheels
@marlonmendoza2882 Жыл бұрын
I just subscribed to your channel. My MTB Ibis Ripley AF Deore 12 speed rear deraileur inner cage bent and broke. Can i just get the inner and outer cage replaced or i need the entire derailleur replaced?
@mtb717 Жыл бұрын
Hello. Thank you very much! You can find Shimano cage separately for m7100 but it fit also to m6100. Number Y3FY98050 Y3FY26000 in Shimano catalog. Try it and write me else. Good luck
@yahir36054 ай бұрын
Alguien sabe si lo puedo usar con una transmisión tiagra?
@peteturner8493 Жыл бұрын
Is there only one position for the tension spring to go back or can extra tension be found / alternative hole spring position as in other Shimano derailleurs?
@mtb717 Жыл бұрын
Yes, only one
@angelojumigop346Ай бұрын
Hi, is there a way to adjust spring tension of the cage? My m6100 cage is so soft unlike my m5100 rd
@mtb717Ай бұрын
Hi. You may screw shadow plus bolt (1:46) to adjust tension
@wasabegaming40 Жыл бұрын
Is the bolt from the outer pulley cage removable? The one that’s connected with the rd body
@mtb717 Жыл бұрын
No, it isn’t
@mattpayne43736 ай бұрын
How did you remove the plate axle that the clutch sits on?
@mtb7176 ай бұрын
Hex key 4 mm
@BigWhiteCloud Жыл бұрын
Интересно, получилось бы провернуть лапку ещё раз, чтобы усилить сопротивление пружины, когда собираешь обратно?
@mtb717 Жыл бұрын
Незнаю. Врятли наверно, но есть муфта shadow+
@BigWhiteCloud Жыл бұрын
@@mtb717 та в том и дело, что у меня её нет, и чтобы поставить переклюк с муфтой, мне пол-байка придётся заменить😂 да и сама по себе база не заслуживает дорогих компонентов, у меня кинетик шторм) вот и выдумываю, как бы и где бы схитрить, чтобы всё было и тихо, и недорого))
@BigWhiteCloud Жыл бұрын
@@mtb717 спасибо за быстрый ответ ;)
@nickstabz8755 Жыл бұрын
Can you please do a video for Shimano Deore M5120 pls, thank you
@mtb717 Жыл бұрын
I will do when I’ll have it
@nickstabz8755 Жыл бұрын
@@mtb717 yesss, thanks! Hope you get it lol, ill be waiting :D
@mtb717 Жыл бұрын
But it have similar construction
@mtb717 Жыл бұрын
@@nickstabz8755 ok) thank you!
@nickstabz8755 Жыл бұрын
@@mtb717 ohhh, well every when do you need to maintenance an rd? I use my bike every other day and wash it 1x every other week.
@rafernjayquijanoiyog7892 жыл бұрын
how many KM you ride before cleaning it?
@mtb7172 жыл бұрын
1700 km
@carlmarxmanaog3132 Жыл бұрын
What is the name of the bolt on the Pulley cage???
@carlmarxmanaog3132 Жыл бұрын
Please notice😥
@cyruspomperada45352 жыл бұрын
Is it possible to replace its cage with oversized cage?
@mtb7172 жыл бұрын
You may try
@mtb7172 жыл бұрын
I think yes
@khryzclimacosa14262 жыл бұрын
how did you remove the axle
@mtb7172 жыл бұрын
Which axle?
@mjojrjr6231 Жыл бұрын
Is the jockey sealed bearing ?
@mtb717 Жыл бұрын
no
@jonitobaltar1354 Жыл бұрын
It is same process in Deore m5120?
@mtb717 Жыл бұрын
Not same but similar
@labolilaboli509311 ай бұрын
Derailleur 10 speeds Is it good for eight 8 speeds???????
@mtb71711 ай бұрын
No
@jeffqt4ever676 Жыл бұрын
How if I lost the thing you show in 1:03 is it okey??
@mtb717 Жыл бұрын
I think yes
@MerlinaEntes9 ай бұрын
How did you removed the spindle in 3:16 mark of your video sir?
@mtb7179 ай бұрын
just pull it
@MerlinaEntes9 ай бұрын
can't be remove to tight sir. Any suggestion? Thanks in advance. 😀
@mtb7179 ай бұрын
@@MerlinaEntes it should come out easily. it spins or is stuck?
@MerlinaEntes9 ай бұрын
done sir thanks, my another problem is that the pin that hold the lock out is loose, it doesn't hold the lock out,it keeps on dropping, in the mark 11:30 the small pin.
@hannes6114 Жыл бұрын
Why didn't you grease the pulleys?
@mtb717 Жыл бұрын
I grease, but not for video
@mtb717 Жыл бұрын
kzbin.info/www/bejne/o6uwkIGogNyjp9E there you can see)
@hannes6114 Жыл бұрын
Thank you
@permilonfrancisc.998 Жыл бұрын
Sir saan nyo po yan nabili?
@mtb717 Жыл бұрын
in internet shop here in Ukraine
@BrokeGalaxy41 Жыл бұрын
Thread on mine has already failed, you get what you pay for. Sigh.
@mtb717 Жыл бұрын
my condolences(
@BrokeGalaxy41 Жыл бұрын
@@mtb717 ye it was the b screw thread. I may of stripped the thread but the newer mechs deffo aren't as durable as the older shimano mechs. I have essentially had to sandwich the bolt with 2 nuts on either end but this has resulted in not having full b screw adjustment :(((
@conniebahinting27752 жыл бұрын
is that deore M6100??
@mtb7172 жыл бұрын
It’s Deore M5100
@mtb717 Жыл бұрын
But it have same construction that 6100
@francisbeladas5669 Жыл бұрын
@@mtb717 so I can use m5100 rd in 12 speed m6100 drivetrain?
@mtb717 Жыл бұрын
@@francisbeladas5669 no, but you can use m6100 with 11 speed cassette
@francisbeladas5669 Жыл бұрын
@@mtb717 they said it has the same construction just without the holographic design in logo and that is the only difference in both
@Piemsj Жыл бұрын
do you have facebook? so i can show my m5100 rd to you?