1937 Lincoln Zephyr: Ian Roussel Plasma Cutter ASMR🤪 WE ARE BACK IN THE SHOP January 13th, 2025!

[@fullcustomIan]

Hey everyone! We are BACK! We took some time off for the holidays! We are in the shop TODAY and will be hitting it hard over the next few months to get Victor's Cadillac to him and get the minitrike out the door. Ian has plans to bring an old favorite that we started this channel with LITTLE JEWEL, with a bit of a different design. We missed all of you! We also have a new FB group that is run by us and is private. We are TIRED of the scammers. facebook.com/groups/1120180179697223/. We each only have one FB account with Blue Checks and this is the ONLY page we have on FB. We also have a new t-shirt/merch design coming out!!! So much exciting stuff for the new year! We also are safe from the fires and our hearts go out to those that lost their homes. So much happening! See you again this week! ~ The Roussel's

[@andygabb1749]

Great episode, but a shame it wasn't longe😮

[@mrfatbobrider1969]

Nice ta see ya nice … as Bruce Forsyth would say

[@Red71RallyNova]

Great to see you back! Anyone else see the little green orb?? At about 3:55, when Ian was talking about the exhaust manifold. Did you do that Jamie ? Aliens!

[@SRT-x9p]

I don't care. You are nothing special.

[@duaneayers6117]

Remove the gas pedal from the floor and put it somewhere in the steering wheel. Like a thumb paddle.

[@mickeyholt3868]

Hello Ian and Jamie is the smoke from the fire drifting down y’all way been praying for you guys safety look forward to another good show this year.

[@fullcustomIan]

Luckily no, it is quite windy today with winds coming up the canyon out of the East. We are further up near Bakersfield. We are moving the camper to the shop tomorrow, just in case. We have a plan in place for evacuation as well. We are deeply saddened by these fires.

[@cahfe66]

Yes, I'm praying for you and others that they would be safe.

[@SuperMickey57]

@@fullcustomIan Like we used to say when I worked in TV production, especially live TV, "There's no such thing as a hero, that's just someone with a damn good back-up plan."

[@larrybeussink7737]

I guess some heat shield material will be in order to keep toes from getting too hot. 😢

[@88kwthomas]

​@@cahfe66pray in one hand and use a hose in the other, see which one is more effective

[@nickmorrow3829]

I ask myself why do I click the like button before I watch the episode. My answer to myself is every episode of Full Custom Ian is worth watching. I would also like to say is Jamie from the very beginning somehow goes to exactly where Ian is talking about. She also ask very good questions.

[@fullcustomIan]

Thanks! We appreciate that. We're just happy to be back in the shop making stuff.

[@RileyRestorations]

Looking awesome guys!!

[@fullcustomIan]

We appreciate the love!

[@ronkay7893]

Years ago, I put a 302 from a car into a pickup. I had the same problem. What i learned was the car manifolds dumped out the back straight into the firewall, were the truck manifolds dumped more down. This info might have helped before you had to cut up your work.

[@65cj55]

Some you can swap sides so the exhaust goes forward a little and loops back, not sure on Fords though.

[@menone8532]

​@@65cj55 Nope.

[@jamiecartledge6891]

​@@65cj55seen the turbo guys do it on the LS engines to twin turbos

[@SteveYankovich]

Glad you are safe from the fires, the poor people who have lost everything 😢, great to see you again. Great to see the Zephyr moving forward

[@markchodroff250]

Well that’s why it’s custom ! Car looks great !

[@fullcustomIan]

🙏😎😎

[@OGMrMod]

Alright alright alright 👍🏻 ❤ welcome back love birds

[@fullcustomIan]

Thank you!

[@65cj55]

12 minutes dang, that was like when a friend pulls into your drive, you get all excited, and they say, ''i can't stay long and can i borrow your law mower.''

[@fullcustomIan]

LOL sorry about that. I just finished it and really wanted to connect with the community. We are in the shop all week, so lots of new stuff coming out. Thank you for watching ~ Jamie

[@65cj55]

@@fullcustomIan I forgive you, hope you're safe from the Fires.

[@lewissemajay8789]

You two are fabulous! Nice stuff.

[@fullcustomIan]

Thank you! More coming at you this week! We are glad to be back!

[@CJ-xl5rh]

I keep watching for an episode where Jamie fabricates and Ian films 👽🥰

[@shaneb4923]

Such A Rad Dude!!Thanks Ian Keep Up The Great Work!

[@fullcustomIan]

We appreciate the support!

[@65bugnut]

Happy to hear that you are going to use Smithy mufflers, they sound great. Sorry to see the floor getting cut up, but you just have to roll with it.

[@fullcustomIan]

Smithy mufflers are the best! They sound amazing.

[@kingjames1586]

I’m a retired metal fabrication & welding engineer and would love to help tinker with this current project. Ian always seems to take on fun projects many of us would enjoy 👍

[@richardspears3033]

Welcome back!!!

[@fullcustomIan]

Thank you!

[@mrbill8542]

Ian, a set of block hugger headers would fit easily in that and the collectors point straight down from the middle, and they are cheap, too !!

[@fullcustomIan]

Thank you!

[@floydbecnel3434]

@@fullcustomIan Thats what I used on my Model A with the 302 . I had problems with the bulky manifolds when fitting my steering rod and joints . Ian and Jamie keep these interesting videos coming . This is a great build. 😎 Happy New Year!

[@ArchieKnuckles-i4p]

Glad to see you all today good show, I'm snowed in and hibernating just what I needed.

[@fullcustomIan]

Thank you! We will have a week full of stuff coming at you including possibly a live. We are just finding the flow this week. Stay safe and stay warm. ~. Jamie

[@jerrybailey5797]

Great to see you back from your holday, lan and Jamie. Good to see things moving forwards on the Zephyr project. 👍

[@fullcustomIan]

Thanks 👍

[@ericfallis6202]

Hello you 2 missed you 😊

[@toddclark332]

Zephyr progress going to be good have a beautiful week you too❤💕

[@fullcustomIan]

We hope you have a great week as well! 🙏

[@crankyoldman65]

Always a shock when you come home.........can 't wander down to the beach and sit in the cabana chair sipping on a Hawaiian Sunset.....I'm so glad you had a safe trip. It's always educational and entertaining watching Ian work.

[@fullcustomIan]

Thanks, we had a great trip and we are glad to be back in the shop!

[@andrewstalinski7193]

Welcome back you guys where truly missed

[@jamaltoufiq]

Hi Maestro Missed your art

[@roywhitman7109]

Love this build!!!👍❤️

[@fullcustomIan]

Thanks for the love! 🙏

[@charleslawrence7194]

Whatever it is, you're going to figure it out. I like your style. Glad you are safe from the fires.

[@ivanxavierdesouzasouza9278]

Bora pra mais um episódio pra conta

[@Spartan902]

Alright! I just woke up and there is a new Ian Roussel episode. Happy New Year Ian and Jamie.🍻👍❤️🇦🇺 I love my grinder with the cutting wheel on. Cut away my man!

[@fullcustomIan]

Happy New Year to you too! Thanks for watching, glad you enjoyed the new episode. ~Jamie

[@ZonDog]

Another great lesson guys!😊

[@fullcustomIan]

We are happy to be back and making videos again!

[@Matthew-x9d]

Oh heck yea! l’ve missed my favorite builders. I have been having withdraw symptoms. Welcome back dynamic duo! Oh yea!!!

[@fullcustomIan]

Thanks! We're glad to be back.

[@chrisb2557]

Welcome back you guys! Hope you enjoyed time away.

[@dave-uf8ir]

Coming along excellent guys cheers 🥂 😊

[@DanielBennett-e5x]

Welcome back! Hope the holidays were a joyful one! Yaaay! The Zephyr is getting closer to completion. This is easily my fave project. Can't wait to see it finished!

[@fullcustomIan]

We’re so glad to be back too! Thanks for watching.

[@DanielBennett-e5x]

@@fullcustomIan 🥰😘😁

[@davemcreynolds6012]

Glad you both are safe !

[@paulcarter7061]

Great to see you guys back. Missed you all and been hanging out for the next awesome episode of the Roussel’s. 🇦🇺😎👽❤️

[@fullcustomIan]

We missed you too! 👽

[@jamesrankin9833]

Glad you all are back! Stay safe, at least it looks like the winds are at your backs. Good stuff!!

[@fullcustomIan]

Thanks! We're so glad to be back in the shop.

[@Telephony954]

Glad your'e back guys. progress like comedy isn't always pretty. thank you for sharing. Be well.

[@fullcustomIan]

Thanks, we appreciate you!

[@odysseymachining]

Sooooo glad you're making content on your own!!!

[@fullcustomIan]

Glad to be back too!

[@lesliehanson-g7h]

Nice job

[@fullcustomIan]

Thank you! 🙏

[@deangraves9757]

Hope you guys are away from the fires. Glad for videos.

[@fullcustomIan]

Thank you, we are safe.

[@MarkFries-o7n]

Glad y’all are safe and had some time off!!! Welcome back!!!!

[@fullcustomIan]

🙏

[@jayrutledge8714]

Glad to see you guys back I truly enjoy watching such a creative mind in function. Hope you guys enjoyed your Honeymoon. Stay safe from the fires I don’t know if you’re close or not. Good luck and stay safe.

[@fullcustomIan]

Thanks for the well wishes! We are safe 🙏

[@henryallisonsr8318]

Hi Jamie and Ian hope you all are having a great day and hope the smoke is not bothering you. Ian you are the man with the smile and seems like you enjoy what you are doing. Good are bad you always manage to joke and smile at what you are doing and that makes me feel better. God bless and have a blessed evening and night

[@fullcustomIan]

Thank you for the kind words!

[@martyb.1291]

Home from work to catch a new video always makes a good day! Sending thoughts and prayers your way you two stay safe!!🤟👽

[@fullcustomIan]

Thanks so much, we appreciate it!

[@marvinjuly3990]

Become back, you two !

[@marvinjuly3990]

Welcome back u two !!!

[@marvinjuly3990]

Ian is this a cruiser or a hat rod ?

[@marvinjuly3990]

Hot rod?

[@fullcustomIan]

Thank you!!!

[@65cj55]

@@marvinjuly3990 Cruiser daily driver.

[@BillMulholland1]

Hi guys. Welcome back. Hope you had a great vacation 🍻👍

[@fullcustomIan]

We're so happy to be back in the shop 👽👽!

[@The.Real.Timmii]

welcome back!😁

[@fullcustomIan]

Thank you!!!!!

[@rickmaynhart6812]

I would like the exhaust coming out of the openings above and behind each front tire. Zoomie style! Oh yah!!

[@klatt4057]

Welcome back ❤!

[@fullcustomIan]

Thank you!

[@oklahomahomesteading.7813]

1, shalom everyone

[@garyseaton4619]

Loving the music...

[@donmelvin7102]

A little more clearance around the exhaust will keep the floors from getting too hot. Good job Ian!

[@fullcustomIan]

Good call, we will be sure to address that next time.

[@stevetravels6160]

Welcome Back!!! Thank you again for sharing your time.

[@fullcustomIan]

We're glad to be back too!

[@DanielSilva-ws5cq]

Always something. As usual, you adjust an move forward 👍

[@shanewright6958]

Looking good 👍👍

[@jericdublin68]

Best music so far

[@SchmokesShop]

Dangit I missed the live 🥲 I was filming though so that's good...

[@fullcustomIan]

It was edited...but live chat...no worries...just wanted to post to let ya'll know we are ok and back at it for 2025...glad you were filming ~ Jamie

[@SchmokesShop]

@@fullcustomIan Hope y'all had a BLAST!!!

[@LandercraftSTL]

Glad you’re back! Gotta take a little time for yourself. Enjoying all the builds!

[@fullcustomIan]

We’re glad to be back too! Thanks for watching.

[@daveboatman4024]

Geez, I’m exhausted! Bet Ian is too!

[@bobapplegate8969]

Going to need to insulate that area on the floor really well.

[@alanhartley173]

Welcome back.

[@launceherron]

Awesome

[@davegallucci9327]

Good job, getting the Exhaust ready.😊

[@jnorth568]

I'd have to say probably one of the only things that I can appreciate without biased on newer vehicles is the weight reduction in parts😅 everything else about new car mechanics in frustrating most days😊

[@johnkranz4004]

Good choice on the exhaust manifold Looking good Ian and Jamie

[@fullcustomIan]

We’re happy you think so! 🙌

[@donaldhalls2189]

Great start to the New Year, thanks for sharing, all the best to yous and your loved ones, Wishing yous a Healthy and Prosperous New Year

[@tims72demon]

Looked like you visited the Big Island. My wifes family is from Hilo. Spent alot of time hiking and spending time at local sites. Good place. Bet the shop inspectors were glad to see you 👍

[@Friskee62]

Well, thaat was short...hope yall had a cool time on your H M.

[@fullcustomIan]

More this week 👽

[@jamescnorris]

Always nice to watch Ian & Jamie. Y'all stay safe w/ all the fires. Much luv from Florida! 💪🏼🐻❤️

[@AussieJase]

Plasma cutting sounds very space age 😂 The zephyr's coming along nicely!

[@fullcustomIan]

👽👽

[@ShelbyCarrigan-u8z]

Glad you're back.

[@fullcustomIan]

We're excited to be back too!

[@donbocci1227]

Keep up the good work Ian

[@dlux703]

It's too bad those manifolds aren't like some, where you can swap the left to the right side etc. so the outlets dump down in front of the engine and then loop rearward, or enable turbos to be added.

[@jimgreen262]

Back to the grind

[@stevecarlson7483]

I was thinking maybe some mid to late 80's Mustang 5.0 factory header manifolds would give you more room? They tuck in closer to the block.

[@ROBByJONEs-2]

love these videos.

[@billweinholtz154]

Welcome back and I hope you are safe from the fires out there. Just a thought when you put the exhaust manifolds in for good, maybe take out the spark plugs it should be easier. Thanks for sharing with us. Much ❤from Lansdale PA.

[@fullcustomIan]

We're back in the shop and the fires are a concern for sure, we're sending our thoughts to everyone affected. 🙏

[@kevinhicks2444]

Shoot, never got notified so joining late

[@fullcustomIan]

I finished editing it and posted it right away. Apologies. ~ Jamie

[@kevinhicks2444]

@fullcustomIan when I saw the video I thought it was a live at first. Then realized that it wasn't. I love what you guys are doing though, it inspires me to work on my 1951 pilothouse dodge after I beat my cancer

[@troydakotasp7whynot]

Could u change the manifold pipes . Put them forward. Switch sides . Have done it on one of my dodge builds . That put the exhaust coming down in the front instead of the back. Just a thought .

[@menone8532]

Ian, crank up the air on the plasma cutter. You will get way cleaner cuts. You'll love it better than a cut wheel. I had a really sweet one a few years back. Had to sell it for fast cash back then,(the economy back then)that really sucked. Looking to buy a new one this spring. I didnt use it often but when I did it saved so much time and clean up.

[@garylankford9306]

Ian using a plasma cutter? I almost hit my head when I fell out of the chair. By golly, it must be the year 2025! 😊

[@IvanHughes-g2d]

Could the manifolds have been swapped to avoid cutting the floor board?

[@mrfatbobrider1969]

I just named your plasma cutter… The. Marsmacutter Project is looking good Guys 👽👽

[@ajlacostewm]

What happened to the body lift you had outside at the other shop.

[@fullcustomIan]

Still there

[@JenningsMarshall-g1q]

Could you reverse the headers left to right right to left and have the dump be in the front instead of the back? I don’t know just a question.

[@charlesgalanek5835]

LOTS OF WORK BUT WELL WORTH IT

[@Bob-cu8no]

Wow you should watch Bello’s Kustoms. Yep that would be a real good idea.

[@fullcustomIan]

Thanks for the suggestion!

[@MrSeptcarr]

You need more videos

[@fullcustomIan]

We got you!

[@andrewbuchanan6130]

Can you swap sides with the exhaust manifolds !

[@bluedog373]

The horse has left the barn, but did you condsider swapping the manifolds side for side putting the outlets forward and then done under the car. You could have also put them down side up.

[@toddsmith7367]

You need exhaust manifolds for a Cobra 2 1977 ish.

[@SuperMickey57]

I had a 1976 Cobra II and you're right those stock manifolds are some tight, compact little suckers! And stylistically, not that that really matters, they're swoopy and the lines compliment the Zephyr better.

[@MorleyRigged]

Out of curiosity, what is recommended to keep heat down? Build your own heat Shield? Wrap? I hope I'll get to see the Zephyr someday! Love you guys.❤

[@TonyGrondelle]

Heat shield stick on from CAR BUILDERS AUST..

[@nancyporter6800]

Glad to see your putting ford motor in ford product I think that if it has CBC it shouldn't been shown in car show as ford

[@Danbo56-h9h]

Old school American Know How!

[@EarlMack-l7q]

They make a block hugger header with a center drop exhaust. Might work better for you, but you do.

[@stephenhjerpe3949]

❤

[@fullcustomIan]

❤

[@jpotter4899]

Dang that is a bummer, but I guess it was a fairly easy fix.

[@murphysgarage]

I don’t do much tin fab, talk about patience and talent.

[@mesasavage]

Its confusing that you use "Plasma Cutter ASMR" in the title, but there is music playing over the plasma cutting??? Huh? Great episode by the way, you guys are cruising to 200k!

[@fullcustomIan]

The music is just background, but I think the sounds of the plasma cutter are ASMR!

[@califuturist]

👍🏾👍🏾👍🏾👍🏾👍🏾

[@dalewyatt1321]

And the molten sparks fly into the engine.

[@johnt.848]

If the engine can't go forward to accommodate the exhaust, move the foot well and dash back.