This is how I do it … Lexan rc car body painted on both sides w/salt technique for a rusty look

[@k1ortia]

This should be tought in every school, pure art..

[@fullspeeddesign]

:-) Thank you Kyle!

[@k1ortia]

@@fullspeeddesign your welcome 👍🏽

[@pnwRC.]

I just got done watching the one for the fire department truck. I like this tutorial even more gooder!

[@fullspeeddesign]

Awesome ! Thank you :-)

[@invader_ren5974]

Gooder isnt a word

[@pnwRC.]

@@invader_ren5974 LOL! It is a word for us redenecks

[@rcsnapon2132]

Awesome video I enjoyed watching it my friend

[@fullspeeddesign]

Thank you!

[@rcsnapon2132]

Awesome anytime my friend

[@brianonthego]

That....was awsome. It really came together.

[@fullspeeddesign]

Thank you ! 🙏

[@andrejskamla9736]

Wow. Amazing Nico... After long years of waiting you showed us how it is done. I can not thank you enough... Thanks man.

[@matthewscheiper6973]

Absolutely incredible work! Thanks for the inspiration and help!

[@fullspeeddesign]

Thank you Matthew, glad to hear it helps!

[@BradHedges]

This is marvelous! What a fantastic tutorial. Well done, and thank you. 👍👍

[@fullspeeddesign]

Thank you Brad!

[@drummerdad80]

That is the best paint job i have seen i love the old style vehicles and this paint job is amazing

[@fullspeeddesign]

Particle Man Thank you sir!

[@drummerdad80]

@@fullspeeddesign did you brush the salt off when the paint is wet or dry?

[@fullspeeddesign]

@@drummerdad80 Brush the salt when it's dry, otherwise paint will spread and soften the effect

[@drummerdad80]

@@fullspeeddesign thanks!

[@drummerdad80]

@@fullspeeddesign this takes patience but it's fun, i am doing an old army truck, can i ask how long this took you to finish?

[@Castortransporter1]

Sehr, sehr geil !!! Im Vergleich zu der roten Karosse ... ein anderes Level ... Respekt und Danke für die Inspiration ... Tolle Arbeit. Gruß Robert

[@MikelangeloPhoto]

This is just... just wonderful work and great demo!!!

[@fullspeeddesign]

Michael Heliker Thank you Michael, more to come 😎

[@jordanwurz1024]

Looks awesome

[@fullspeeddesign]

Jordan Wurz Thank you Jordan!

[@Docdug]

That is just incredible!

[@fullspeeddesign]

Thank you !

[@130mky]

Dude you’re a frikin artist

[@fullspeeddesign]

Melissa Kyer thanks Melissa

[@marcushaas44]

Great stuff mate! Is there a vid on how you build that windshield?

[@michaelavery4427]

Truck looks good. If u were to do over would u cut windshield completely out since u cut most of it any ways or would be more hastle to reattach compared to masking.Thx

[@joethurman2712]

Pure skill

[@fullspeeddesign]

Joe Thurman Thank you 🙏

[@roadhazard6620]

Thanks for the instructional vid... I've just finished the ProLine '66 F100 cab, using your methods. Worked out AMAZING. I will probably never do a shiny, crisply detailed body again... Wish you could see some pics...

[@fullspeeddesign]

Thank you for the feed back, good to read your comment … and now show me your rig!

[@roadhazard6620]

fullspeeddesign I'd love to show you the truck... But not quite sure how... Got a good bit of work still to do on it, but the body same came out great. Thanks again... There's an RC related site called Magnatfied.... It's on there, in the "What did you do to your RCs today?" thread... Old rusty '66 F100 with a wooden stakeside bed on it...

[@roadhazard6620]

I've put a quick vid on KZbin of the truck... next one will be similar, red, maybe a little less rusty, but this is the way to go for me from now on... now I'm doing a Power Wagon for my buddy. They say imitaion is the sincerest form of flattery...👍🇨🇦

[@bobbyspenser7304]

Great video on doing that good job an I wish you would have just done it all with out speeding it up on all the best parts of grinding an shaping parts but none the less looks nice an I am trying my paint like this thank you for sharing your great video

[@cabojay12]

Wow amazing job..

[@fullspeeddesign]

Thank you Jay

[@DustyFingersRC]

Looks amazing 👍🏼

[@fullspeeddesign]

Thank you! 🙏

[@scal6871]

Super ta dépanneuse, je m'en suis inspiré pour construire la mienne et tes vidéos sont très instructives, j'adore ton style, Bravo!

[@fullspeeddesign]

Merci Scal !

[@arni7810]

Very cool, you Inspired me to paint my shell. I have a question. Do I need to use tamiya PS-12 silver also while adding the Tamiya PS-14? Or no? And why did you use it? 😮

[@gabrielromero5763]

😎👍Exelente video and great Paint job beautiful and truck

[@fullspeeddesign]

Thank you Gabriel, another one is coming soon :-)

[@crushingsnakes1972]

I just wanted to thank you for sharing your ideas. I did my first attempt at weathering and it looks awesome. Don’t get me wrong, I made a few mistakes. Some, I was able to call good mistakes others, I would not do again on my next one. I wish I could show you what you inspired.

[@fullspeeddesign]

Daniel Marcum I would love to see your work, contact me via Facebook (see on the « about page » of my channel) 👍🏻

[@toddwanke602]

Great video - thanks for all the detail!

[@fullspeeddesign]

Glad it helps! 🙏

[@ironcityrc2583]

Looks great!!

[@fullspeeddesign]

Thank you!

[@adventuretruckrc8863]

Great job👍

[@fullspeeddesign]

Thank you ! 🙏

[@anthonyganley5975]

Hi can you confirm the paint colours used? I couldn't tell from the video. Great work!

[@fullspeeddesign]

Thank you! Inside colors Tamiya PS-12, PS-14. Outside PS-6, PS-55

[@silentcontrol85]

awesome paint job! thanks to share with us & inspire other to be creative! 👍☺

[@paulcooper2897]

Incredible! Amazing how good it looks even close up!

[@fullspeeddesign]

IMagius IMagius thanks!

[@mirocapin4759]

Mastre work👍👍👍

[@fullspeeddesign]

Thanks Miro!

[@joliousvideous]

Awesome result...just ordered my Power Wagon body and looking for weathering ideas...perfect timing my friend :-)

[@DamsSmadRC]

T’es un artiste, ce travail de maquettiste et de peintre ainsi que de créateur, bravo ça le rendu est époustouflant 🤟

[@fullspeeddesign]

Waow, merci beaucoup ! Encore ! ;-)

[@dunetrash2500]

Thanks so much for the tutorial! Excellent work, I’m now inspired to get my own weathered truck going

[@fullspeeddesign]

That's the kind of comment I like ! :-)

[@roadhazard6620]

Hey fella. A merry Christmas to you and yours. And a big thanks again for the rusting/weathering vid. My truck looks great...

[@fullspeeddesign]

Road Hazard Merry Christmas !

[@michaelthomas3262]

AWESOME GREAT WORK

[@ryanli442]

Master !! great video shows essential technique, tks very much :)

[@fullspeeddesign]

Thank you! 🙏

[@dirtyhabitz2888]

Stunning work! I’m just about to paint a Proline F100 66 Ford cab, and you have changed my plan with it, I’ll try out your techniques now. I have also just started a ‘ground up’ build based on the VS4-10 chassis, that will be using the Mojave 2 four door hard body from RC4WD. I really didn’t know what colour to paint it, or if I should try and weather it, or not. You know I’m absolutely gonna try and use some of your techniques on that too! Thanks for taking the time to share 👍

[@fullspeeddesign]

Thank you! Drop a link so we can see your work 🙏

[@brianherskowitz3020]

Awesome work man!!Where did you get the windshield frame?? Please

[@fullspeeddesign]

Thank you Brian, I've cut the windshield frame in a thin sheel of steel.

[@stephenkeogh-hardy5548]

When you sprayed the first over layer did you let it dry before brushing it off?

[@fullspeeddesign]

Yes, otherwise paint sticks and leaves traces.

[@joshtonry4291]

Looks great, now I'm gonna try making mine look the way it should

[@keek66]

Great job! I'll try to create a tamiya 2CV like this. Thanks for the inspiration 👍

[@fullspeeddesign]

The 2CV is so nice ! Drop a link when it's done …

[@paulvanappeven3340]

Nice work. 👍🏻

[@fullspeeddesign]

Thank you Paul, happy 2019

[@stratobungle]

Incredible job, much appreciation for uploading these extremely helpful videos! Nice use of the Dremel and the Xacto blade "scratching", never would have thought of that in a million years... (one minor mention - maybe a little more footage of the finished truck before fading out to the end of the clip, so we can appreciate them even more without them being hidden since KZbin puts preview thumbnails up on top of the screen at that point?)

[@fullspeeddesign]

Thank you! And thanks for the end advice, I'll remember it for the next video 🙏

[@achillerc3483]

Bonjour, superbe travail !! Pour la base de fer , il y a plusieurs teintes vous prenez laquel fer , or , bronze, argent ?Merci d'avance

[@fullspeeddesign]

Merci ! Je mélange les 2, silver un peu partout et bronze aux endroits que je souhaite rouiller

[@brav020907]

What are you using to draw lines in between the body lines? Pencil, pen, marker?

[@andrewbenson9191]

Great video 👌👍

[@fullspeeddesign]

Thank you Andrew!

[@BITTERFLEA]

Amazing! Nicely done man!

[@fullspeeddesign]

Thanks man!

[@rcbitz4215]

Brilliant video and thanks for sharing.

[@Paul-815]

Awesome! Love it. Great job

[@fullspeeddesign]

Thank you Paul!

[@ThePontiacmann]

nice Work, looks great

[@FunTimezRC]

amazing video... great job!! 👍

[@fullspeeddesign]

Thank you !

[@badman187ification]

AMAZING!!!👍👍👍✌️

[@fullspeeddesign]

Thank you!

[@Jarhead1313]

Thank you so much!!! I've got a Proline 1966 Ford F-100 Body for my new Arrma Granite 4x4 Blx and am wanting to make an old clunker farm truck and didn't know where to begin but thanks to you I now know,but could I use Tamiya Corsa Gray instead of yellow?

[@danielkonrad1444]

No. This technique only works with yellow. Its impossible to change the colour.

[@seanmellows1348]

Very nice

[@fullspeeddesign]

Thank you Sean!

[@johnnyrainscustomrc]

That came out nice mate😁🤙🤙

[@fullspeeddesign]

johnny rains custom rc thank you! 👍

[@danielklock2225]

Incredible!

[@fullspeeddesign]

Thank you Daniel!

[@dirtydsrc]

Very nice work bud.

[@rcf1x301]

Wow, that looks freaking awesome man! I'm gonna try this out! :)

[@fullspeeddesign]

Thank you!

[@bobble1476]

dude you should make these and sell them they are awesome

[@fullspeeddesign]

Thank you dude! Is this an order? 😉

[@bobble1476]

Defo they look fantastic

[@thegreatoutdoorsnstuff]

That's awesome! Inspiring me to try it

[@fullspeeddesign]

Great! 🙏

[@eM4rio]

amazing video !!! what an effect, wow ! Do you remember what cutting wheel did you used for your Dremel? Can't find it anywhere on Dremel site, and those EZ click wheels are just to thick for me :/

[@fullspeeddesign]

Thank you! The cutting wheel is not from Dremmel, it came in an accessoiries kit from a cheap brand, I don't remind the name.

[@eM4rio]

@@fullspeeddesign thank you, keep up the great work! :)

[@ExtremeRC13]

What kind of tape did you use? I’ve been trying to find something like that to do for my RC cars.

[@JunKE70wagon]

Can i ask what you used to do the detailing at 6:30 in video, is that a sharpie pen or pencil?

[@fullspeeddesign]

A cheap Bic Mechanical Pencil, I perfer the 0,7 mm.

[@CarminesRCTipsandTricks]

Very Genial !!! I've used the two part Rust Patina in Model Railroading for YEARS, but never thought of using it on RC Bodies before!

[@sprather84]

Amazing vid brother i cant waitto try this on my next body

[@fullspeeddesign]

Let us see where you go !

[@blueborealis]

I love this. So well done. How well could it be made to stand up to actual use on the trail? Anything good to cover it with?

[@fullspeeddesign]

Thank you! As is it's not built for heavy hard rock crawling, more luke realistic cool riding

[@Sergeant_Cartmann]

Finally, after this long time of waiting

[@danielmcclelland9428]

Awesome paint job , really love what you did , where did you get the window frame ???

[@fullspeeddesign]

Thank you Daniel! Window frame is cut out of a thin steel sheet

[@OldIronRC]

very nice effect.

[@RcAVENTURE.V.F.R]

Extraordinary brother, good job brother, I like body, big like 👍 👍 👍 👍 👍, thanks for sharing

[@RobTheTechnician206]

Where did you get the window trim for the windshield bud I need one

[@fullspeeddesign]

The WICKED vaper Vape reviews I did it myself, cut in a thin steel sheet 👍

[@a.ndy.nonymous]

Impressive.

[@fullspeeddesign]

Thank you!

[@egoperest]

Great work and series! Inspirational! About that rust, is it harmful as the natural rust?

[@fullspeeddesign]

Thank you! That rust is made with real steel power and acid is used to activate it so you have to take precautions. Once it's done and dry you can protect it with varnish to avoid contamination. With pigment and salt you can have very realistic results too, takes a little more time and skills too ;-)

[@boko1901]

nice work, is the front window custom made

[@fullspeeddesign]

Yes, I've cut that part in a 1mm thick steel sheet

[@crushingsnakes1972]

Did you do something to break the surface tension of the water?

[@fullspeeddesign]

If you mean around 4:00 before applying the salt … no. With the spray I have various sizes of drops. I don't want water allover the surface, neither too regular.

[@fitritv]

Wow. Amazing i try

[@MrGes536]

Well done.

[@fullspeeddesign]

Thank you!

[@rjbronson01]

Very nice! So you use a pencil to outline the doors?

[@fullspeeddesign]

Yes a simple graphite pencil. You can erase it if you make a mistake 👍

[@jahmenrcbuildingasone4254]

Very nice brother!!

[@fullspeeddesign]

Thanks!!

[@montana4069]

No... thank you....looks real....im going to try to do it on my rig....👏👏👍👍😎

[@jordanschmidt5044]

Just. Wow.

[@fullspeeddesign]

Thank you 🙏

[@wyattduerr8830]

What is that trim piece you have in the windshield

[@fullspeeddesign]

A steel piece I made 👍

[@mini_worx]

Artista!

[@fullspeeddesign]

¡Gracias! Feliz año

[@showroomhobbies482]

I see that you painted over the salt did you sand till most of it was gone?

[@fullspeeddesign]

It depends of the quantity of salt you put, I like to put a little too much salt and leave some between the paint layers … it adds texture. If you sand down all the salt your paint will be flat … it coold be cool too, it just depends of the project. The best is to try on an old body or plastic bits you have left.

[@kevinbailey1632]

How can one achieve the broken glass look with lexan?

[@fullspeeddesign]

Quite easy, find a picture of a broken glass you like on Google and replicate it on the lexan window using a sharp hobby knife. Always easier with a good example than from scratch.

[@kevinbailey1632]

@@fullspeeddesign thank you! I will attempt it on my rusty c10 crawler

I missed you, my friend. Nice build.

[@fullspeeddesign]

Lucas Martínez Parra thank you! Where have you been ? 😉

@@fullspeeddesign You're welcome. Well, I just chillin' myself. You know, relaxing.

[@Tok_Karo]

Waw.. amazing...boss

[@fullspeeddesign]

🙏 Thank you!

[@jyc29]

Merci pour ce tutoriel !!

[@fullspeeddesign]

Content que ça aide !

[@TannerG1989]

What is this background music? It gives me Tool vibes.

[@fullspeeddesign]

Babylon - Disco Ultralounge by Kevin MacLeod :-)

[@mickeygoldmill3965]

Will this work on die cast car

[@fullspeeddesign]

Of course, salt technique can be used on plastic or diecast models too !

[@FrankygoestoHobbywood]

a very nice result.!

[@eskimojoe6564]

Amazing man :)

[@fullspeeddesign]

Thank you Joe!

[@tracerjournalofrcphotograp3129]

You are the best

[@fullspeeddesign]

There are a lot of talented modellers out there but your compliment is heartwarming 🙏

[@joshuahealy6974]

where did you get that front windshield

[@fullspeeddesign]

I made the windhield frame out of a steel sheet.

[@spork861]

What's the purpose of "purging your spray cans"? I googled it and nothing came up

[@fullspeeddesign]

This way paint doesn't dry in the cap and your spary will still work fine later

[@spork861]

@@fullspeeddesign thank you for the info/reply, I wasn't sure what the purpose was but now that you mention I do understand it now. It's to purge the remaining paint out of the nozzle and since the can is upside down it wont draw additional paint from inside the can.

[@fullspeeddesign]

@@spork861 your explanation is perfect ! 👌

[@prepperpov5852]

This is VERY cool

[@fullspeeddesign]

Thank you

[@TSully2013]

Impressive happy new year

[@fernsolo]

Excellent 👍🏻

[@fullspeeddesign]

Fern Solo thanks! Happy 2019

[@crushingsnakes1972]

At what point did you paint the grill?

[@fullspeeddesign]

Around 5:00 :-D

[@crushingsnakes1972]

fullspeeddesign what did you do the frame around the windshield with? Was that 3D printed?

[@fullspeeddesign]

@@crushingsnakes1972 I made the windshield frame out of a steel sheet.

[@crushingsnakes1972]

fullspeeddesign thanks for answering the ?? I appreciate it. I’m a noob to the scale side. I picked up a new kit the other day. Can’t start the build yet, waiting on some stainless screws so I’m researching the weathering paint methods.

[@fullspeeddesign]

Daniel Marcum Awesome! In scale projects the only limit is your imagination ... lot of fun for sure