Fully Rebuilding My DREAM STUNT MOPED

[@TheMrCherne]

Never felt so jiggy watching a build vid this music was fire

[@TwoStrokeJ]

Gotta get you up and grooving

[@lauraiss1027]

Some look for music videos, some for informative stuff. Man this music is annoying and almost every time totally our of mood for the content and way, way too loud for the content. Probably good as a background sound when working, but on the other hand, here's a guy removing engine head while low grade synthpop blasting through earphones. It's ridiculous to observe frame of vintage moped while nostalgia induced synthesizer default presets keep handling the mood. You make informative/entertainment videos or you make music videos. Yeah, I know, I can just not watch this, I show myself out.

[@Callofdutyjoey]

@@TwoStrokeJwheres the Honda elite? Did you get rid of it?

[@aaronmedvedskiy1303]

2 strokes are awesome.

[@TwoStrokeJ]

Very much agree

[@Swappy-il7ug]

Greta who?🥱

[@BrickEngines]

Yet 4 strokes are better.

[@Veloxxtekk]

​@@BrickEngines nope 2 stroke is better faster sound better and have more power

[@BrickEngines]

@@Veloxxtekk all of those claims are false exept MAYBE the power, it highly depends on the engine quality and cylinder amount, but the sound is far superior for 4 strokes why? well you probably havent heard about tis bike: kzbin.info/www/bejne/i3mXi3ypjN5niac

[@dabitoyatodoroki6985]

Yes yes yes yes yes I miss the Puch Maxi moped it's one of my favorites

[@TwoStrokeJ]

me too! So glad I could finally bring it back

[@JerzyMichał-o3d]

me too

[@Ralle3330]

In my country in the 1980 all had a puch of some sort funky little bike

[@DasChrazy]

its just so nice seeing someone doing this in america. i live in austria and 50cc tuning is everywhere

[@TwoStrokeJ]

Yep they aren’t huge here in America but there is a small scene of people who really enjoy them!

[@lukausaj6818]

Love those mopeds. Now that the puch is almost finished please do a tomos build too.

[@TwoStrokeJ]

I've been thinking about a tomos build. Maybe in the future once this bike is completely done!

[@nevioroth328]

Actually your new zylinder is for Tomos mopeds J

[@zdenekberan7002]

A nice rebuild, I love using reed valve kits on these engines as well. I'm also impressed by how well the stock clutch held up. Just a quick tip for the next time - if you heat the bearings up, they just slide onto the shafts without any additional force. Using a press on either of the shafts is a huge risk. The output shaft is actually made of two separate parts and you could press the large gear out of position. The crank is even worse in this regard, without the webs supported, you could squish them together and the crank will no longer run true.

[@TwoStrokeJ]

Interesting, I didn’t know that! Thanks for the advice, hopefully I didn’t mess mine up doing that!

[@jonathanparker123]

You're so underrated man, i love scooters and mopeds and there's not that many project videos out there

[@TwoStrokeJ]

thanks man! I agree though, I love showing the progress on these builds so Imma keep doing them!

[@BrayDen-v5d]

Bc mini bikes exsist

[@jaydentarantaal4362]

I stumbled upon this channel out of boredom. I always had a passion for cars but this channel, Two Stroke J. A new fresh passion was born. Thank you. Keep up the videos, I love them and each day I learn something new and gaining knowledge.

[@EddieTheH]

For tapping drain plugs, I always heat the metal to it's normal operating temp first, that way it doesn't weep when the engine warms up.

[@kroketfilet]

as u dutch guy who races on puch maxi's it's very fun to see this, you should def look at some videos of it, especially the ones from puchshop itself or from pascal mussche, those are some FAST bike's , with the fastest hitting about 120 km/h, KEEP UP THE PUCH BUILD AND STUNT VIDS, MUCH LOVE!!

[@TwoStrokeJ]

I've watched a ton of those videos haha that's where I've learned most of what I know! Thanks for the support man!

[@nevioroth328]

As a Swiss, where almost every tennager has a moped, its so nice to see an american drive and work on his Austian moped. So entertaining👏

[@zman_bman]

Love the content, man! Keep it up. Until I stumbled upon you, I didn't know how cool 2-stroke was!

[@TwoStrokeJ]

thanks for watching and glad you enjoyed! Just trying to share the fun with everyone!

[@btgmoto]

Congratulations! Lots of love and hours gone into that. Can't wait for the next update!

[@TwoStrokeJ]

Thanks man! Super excited for the project to be finished

[@kedann]

so glad if found you back when you posted a video with you and your buddy building talks mopeds in a apartment. channels came such a long way and i’m glad i’ve been here for the whole thing

[@TwoStrokeJ]

Thanks for the long term support man! I really appreciate it!

[@crystalzues4712]

I sware every video of yours is just a rebuild video, and Im here for it. Love the process.

[@Tedotato]

I dont understand why your channel haven’t blown up yet, the content is amazing ✨

[@derekrebel3384]

Wooo, another 2 stroke J video. Always a good day.

[@TwoStrokeJ]

Appreciate the kind words my guy!

[@Mankikuski07]

im really excited for the next episode of this series! You just cannot beat the sound of a 2 stroke. BTW that is a sick build.

[@TwoStrokeJ]

me too, can't wait to have this bike fully finished

[@mattcleary9522]

This right here is a weekend summer project my 78 just hit 1000 miles so it's worth doing everything rn while I need to do scheduled maintenance

[@TwoStrokeJ]

love to hear it man! Can't wait to get mine fully finished!

[@Gugugaga2234]

Please make soon another video about moped stunting, LOVE IT!!!

[@TwoStrokeJ]

100% will once this build is done!

[@Jack-ct7gg]

Sick build🔥🔥 Few tips just in case. I think you spaced out the seal on the stator side from the bearing. If not I would do that otherwise the bearing won’t get lubed by the 2 stroke oil. Second thing is if the clutch side cover starts leaking oil I found tightening the clutchcover and the cylinder first before all the case bolts helps align the cases because the e50 doesn’t have any dowel pins that can help eliminate that problem. Love to see the builds keep up the good work💪🔥

[@TwoStrokeJ]

Thanks for the advice man! I made sure to leave space between that seal and the bearing for the 2 stroke oil!

[@maxmulder396]

Damn that thing is full (dumps it in the garden)

[@TwoStrokeJ]

Haha it was in a fire pit and we used it to light a fire

[@GwnSerchan]

what carb size do you have on there? i think for a 70cc 2 stroke u could use a bigger carb i would think. same for the exhaust

[@TwoStrokeJ]

19mm carb. Could maybe upgrade it eventually but it works great for now

[@GwnSerchan]

@@TwoStrokeJ ive got some friends who are into 2strokes and most of em say carbs and exhaust help a fck ton when u have a 70cc. then again parts here are a bit easier to get i think

[@meromere8339]

I like the way the block looks clean and not new

[@thatchernelson3762]

Inspiring me to finally get mine running agian. Sick build great edit. Keep it up🛵🛵

[@TwoStrokeJ]

Bro yes! You should it’s so worth it

[@difficultkunt4050]

13:13 Lol.. Epic 80s music to go along with the build..😊 Similar to when the A-team build one of their contraptions where they stick AK 47's on everything every week towards the end of programme..😂

[@TwoStrokeJ]

hahaha so true

[@Outback69]

Hey Two Stroke J, your area looks a lot like central PA 717. I have a 1978 PUCH MAXI that I just got a major bearing service and brake job done. I also started to rebuild my engine. I need to take it slow but it'll get there. I wanna be riding this summer atleast- W

[@TwoStrokeJ]

Hey man! I’m still working on finishing this build but I’m the same way, just want to get it finished up for summer!

[@Outback69]

Nice, I'm converting mine to 12V​@@TwoStrokeJ

[@Outback69]

Got the bad bitch running! I am using the 70CC for the people kit. It hauls ass! Especially with a 14t sprocket. I gotta time my motor yet other then that we are almost good to go. I am using the 12V AC ignition with Pietcard CDI 2041. I just need to get the head lights and tail lights working. Other then that I am happy with the bike! I just acquired a pre bug 98 Zuma with a 70CC Athena engine for a rebuild!

[@itstomsgarage]

Love the Puch! Glad to see it getting a new life! 🙌

[@TwoStrokeJ]

Oh yea, gotta revive everything I get my hands on

[@nszabados]

i have that same red gas can. it’s really nice up until i have to fill it. that strainer inside it for some reason doesn’t let the gas drain into the can fast enough so it just shoots out a lot of the time when im filling it.

[@TwoStrokeJ]

Yea bro I hate that gas can haha I wish it didn’t have the fancy valve thing on it

[@nszabados]

@@TwoStrokeJ i got a briggs n stratton one for my chinese diesel heater from rural king, way better.

[@mitarbeitermarcelhering6487]

Saw that you still have the stock clutchcase, it could be possible that the gear that is pressed in it could strip an come lose, i would reinforce it by welding it on the clutch side around or buy a new racing clutchcase. Cuz happened recently to mine 70cc puch maxi

[@TwoStrokeJ]

dang that must have been pushing some power to break that off! Good advice tho man!

[@Nurburgring-Nordschleife90]

you can also buy tomos moped like for example tomos apn 4 which has a gear shifter. Tomos mopeds are known to work even after 60 years. They are a work of art

[@Sky_Betahh]

wait till bro finds out that a beta rr 50 track exist

[@jurrevanveen2377]

Probably doesnt care that much, as the beta is expensive to buy, mod and very boring to ride

[@2AABEATS]

SVP bro,can you pls help with an advice on my yamaha scooter cc 100 1998 bike, the speed is 160 but it runs very sloo about 80 km and I usually hear noise from the back clutch ❤❤❤pls am watching you from Ghana Accra

[@difficultkunt4050]

13:13 😂 Its like an episode of MacGyver with the music..😂

[@DylanGoebel]

US market got screwed on crappy crankshafts. That's the first thing I upgrade when rebuilding an e50. Also noticed your oil seal was reinstalled backwards on your driven shaft.

[@tysonbus]

Do you think it would be possible to do a similar build on a Jawa Babetta 210?

[@TwoStrokeJ]

I’m sure it is! I’ve never researched one though

[@stephanb5945]

in the Netherlands/Europe the 25KMH models only had a brass ring and the 45KMH models had a needle bearing around the piston pin ;)

[@rasmuslangberg4489]

LOVE THE PUCH VIDEOS, KEEP IT UPP MAN🤘🤘

[@TwoStrokeJ]

thanks man I will!! All love!

[@KyleMoto]

nice video! cant wait to see you shred it again!

[@TwoStrokeJ]

Same man, next video with it I should have it finished up and riding!

[@blueman46]

new subscriber here from the uk, love this and cannot wait to see the test ride and hope you will do a top speed run? with stuck bolts i found that if you knock the heads side to side instead of directly on top the seal breaks easier and will help

[@TwoStrokeJ]

Ah that’s some good advice man thanks! I will definitely do a top speed test once I get it all finished! Thanks for subscribing brother!

[@NordbyFPV]

Damn dude now I miss my Maxi KL! Should've never sold that thing. Love the build man!

[@mr3_def]

20:33 why do the new clutch pads look more used then the old ones?

[@TwoStrokeJ]

They are just different, they have way more clutch material and it’s grippier so it looks old and dirty but it’s not

[@mr3_def]

@@TwoStrokeJ ohhhhh, okey. Thanks!

[@venharselmani4550]

Great content always,Big respect from Albania

[@TwoStrokeJ]

Appreciate it my guy, way out in Albania that’s dope!

[@Toxic2T]

Will you port the exhaust port tho? A custom exhaust for that setup would be killer aswell

[@RobertHatfull-df4ch]

Had quite a few of these in the 80s Thomas ,garelli ,puch and many others I used to get them for between £10 /£25 and they where great fun think my last one was a 72 puch pedal and go . Great content fella and a good luck getting your ped as you want it 👍

[@TwoStrokeJ]

Thanks!!!

[@Ace01010]

I swear rebuilds like these are just about having the right tools to get started hahaha, I’d be half way in and realize I don’t have xyz tool then my project would be halted for some time negl.

[@TwoStrokeJ]

this happens to me all the time haha it's the worst. Then the project gets delayed for a week waiting for some specialty tool to come in the mail

[@huerosantos7563]

I was going to buy a PUCH back in 78 when I was 17, but got a Honda 125cc. (A bit faster and manly). So now at 62, I'm excited to see this rebuild of a bike that came from back in my day. 😎✌🏽

[@creamyvr1862]

i love mine its a 2003 yamaha vino 50cc and im gonna try the 70cc kit for mine

[@miguelpagansr6128]

Hey j it's been a while since I saw the bike, the steering bearings do you know what size the frame tube is? And do they come in different sizes. And a link please, thank you.🎉

[@MaxiMoller-zp9hk]

Where did you get the stearing stam from? 22:50

[@relaxingpill7525]

whats that foamy substance you spray for cleaning?

[@joona1603]

you should get a racing ignition for the moped🔥🔥Sick bike man!

[@pritamsoulrider350]

It's awesome dude,,well whats that cleaning spray you are using while cleaning that suspension.

[@Dave_Rides]

Here early bubba , miss you

[@TwoStrokeJ]

Miss you too bro! You are still out here killin it, keep it up!

[@h0pzy798]

Hey, what did you use to clean the frame?

[@keksiman7203]

This makes my need for a moped project even worse haha. Planning on taking a rieju mrt 50 and making it look nice and maybe go fast.

[@TwoStrokeJ]

yea man build that thing up!!!

[@keksiman7203]

​​@@TwoStrokeJ My dad didn't allow it 😢 Will most likely build a wheelie scooter instead.

[@deaddzi9445]

You always make my day dude! Keep it up❤

[@TwoStrokeJ]

thanks for the support and kind words man!

[@IAM2CAN]

I love how it sounds, and i didn't know that people had puch maxi's in the states, i remember when i had my puch maxi. its hard to kill one, but starting a puch takes quite a bit haha

[@muzamilzaman8772]

Bro i love this video and your bike. Amazing work.

[@hinkendunken3468]

I rebuilt my brothers puch maxi engine and got it going today, good video cant wait to see you wheelie it again

[@TwoStrokeJ]

Thanks man!

[@DerAnderee1]

Im from Germany and the puch Maxi is one of the most iconic mopeds of Germany Austria and Switzerland

[@Joschi746]

Ja ist es wirklich ❤ Wo kommst du her ?

[@TwoStrokeJ]

Absolutely man! I’m glad they sold some of them here in America

[@DerAnderee1]

@@Joschi746 nrw hier gibts leider nich so viele Leute die noch moped fahren

[@Thijmpje]

When is the honda elite coming back? (You really inspired me with it, i bought an kymco dj-y50 and put the same set up on it for less money 😊 and now i can also auto wheelie) so i would love if you would make another video about it 👋🏻👋🏻👋🏻

[@TwoStrokeJ]

I would love to make some more videos on it! May do a couple more upgrades and obviously some good rides once the weather is a bit nicer!

[@Thijmpje]

@@TwoStrokeJ sureee thankss

[@angrydoraemon4390]

i love this kind of video..may be you can do a suzuki v100 next

[@DanielRenkert]

Where did you get a Puch in the USA? Always thought they were only popular in central Europe (Germany, Austria, Switzerland maybe). Really cool

[@nickschippers968]

Down here in the netherlands they race with puch mopeds. Some of them are crazy fast. Nice build keep up the good work👌

[@TwoStrokeJ]

Yep there are some small scenes that do that here too! Not nearly as much as the Netherlands tho. Thanks for the support!

[@nickschippers968]

@@TwoStrokeJ youre welcome, theres nothing better then the sound and smell of a 2 stroke

[@Arden_-qk1hi]

finnaly new video please more from the moped

[@TwoStrokeJ]

imma keep em coming bro!

[@RichardGilmoreDronetech]

The notch is most likely for the steering lock. Awesome video. I had one of these puch's 24 years ago when I was 16. Sorry I sold it now, as I want one so bad. Lol

[@wiebebosgra6219]

You simply never dissapoint, great rebuild

[@TwoStrokeJ]

Thanks man! Glad you enjoyed it

[@christianvlogs8277]

Leuke video ,met wat voor spray heb je het blok en de onderdelen schoongemaakt Ik hoop snel op een nieuwe puch maxi video

[@TwoStrokeJ]

The block I just used gasoline to clean it actually. Most of the other parts I used zep foam degreaser

[@Waltervazquez599]

Fantastic video my friend like and Greetings from Argentina 🙋🏻‍♂️

[@zoutewand]

Hey man i highly recommend getting a t grip screwdriver. Its perfect if you want to increase torque/grip

[@6Twisted]

There's no better feeling than fresh bearings and grease.

[@case_puma_1608]

Ist das ein tomos Zylinder? Und welchen Schaum reiniger nimmst du da?

[@osnariderz5075]

Ne puch aber Zubehör aus Amerika

[@xBardy]

Finally ❤

[@TwoStrokeJ]

yessssss

[@nathanw5747]

What size tires are you rockin?

[@Benjimotofinla]

MAN I LOVE YOU!

[@TwoStrokeJ]

I love you MORE!

[@rfmurray1]

Sick video on the process! How big of an upgrade is that stem bearing? Would you recommend?

[@TwoStrokeJ]

100%. Even with the upgraded forks I had, the front end was loose and had a lot of play in it just from those shitty stock bearings. Now its 100% tight. Haven't done much riding on them yet as the bike still isn't fully finished but I would for sure recomend it

[@rfmurray1]

@@TwoStrokeJ shiii say less. I'ma have to do it too then while I'm putting my EBR forks on. You got it from treatland?

[@larsvegas1505]

pretty sure u coudve just pressed out the copper bushing without disassembly of the engine/replacing the cranckshaft. just replace t with a bearing.. comes with the cilinder kit most of the time. WHole rebuild s better offc..the 65cc polini cilinder kit is what ud want for this..

[@Junkxt]

Its so crazy to see "mofas" in america as an german😂 Beautiful bike man 🤟

[@TwoStrokeJ]

Thanks man! I’m glad I can represent the culture here in the USA

[@nic5696]

YESSSS FINALY !

[@TwoStrokeJ]

whooooop

[@teamhardracer]

Love your Videos👍🏼

[@TwoStrokeJ]

Thanks man! All love

[@jackson_ay4848]

Where do you got the steering bearing from ?

[@mooz111]

Amazing video

[@TwoStrokeJ]

Thanks so much

[@ispartacus0877]

Thanks J, I've asked for a Video with the Puch and I love those vids. Love your content, keep going💪🔥

[@TwoStrokeJ]

Thanks so much for supporting them man!

[@jonasmader]

Hi, Could you share where u got that nice headset bearing kit from? i want that for my maxi! Kind regards!

[@TwoStrokeJ]

Got them at this link here. you have to use the specific EBR forks though with them as well. www.treatland.tv/TAPERED-headset-bearing-conversion-for-30mm-EBR-p/tapered-headset-kit-maxi.htm

[@jonasmader]

@@TwoStrokeJ Thanks alot! I just found them in EU, same kit as u linked. Funny because i thought EBR forks was 28mm. I cant find a 30mm fork in EU, got any help here?

[@skilow3590]

Loving the puch content 👍

[@TwoStrokeJ]

Thanks man!

[@nevioroth328]

Such a great vid! Waited long for that and it was do entertaining. Even for me, I saw something I never seen before or even knew this existed and I work on my mooed everyday . That stearing bearing from Italkit. I didnt knew Italkit had one of those. Keep it up!🫶 I'm exited for the next vid!!

[@TwoStrokeJ]

the steering bearing kit is actually from treatland.tv! But yea man, working on these things is so fun!

[@ericpoliste8802]

i love the 80s vibe music palying in the background while you work on it #80sforever❤

[@TwoStrokeJ]

Thanks man! I felt like it fit the moped vibe haha

[@jensond6851]

u got a link for the bearings u put in the steering.

[@LappemitPuch]

i saw that you upgraded your clutch but on an moped website i saw there is an specific clutch for an kickstarter that even has 3 sides sides idk how you in america call this but im only saying that there is an clutch for this

[@ZanPajnic]

i wass faking waiting for moped concent thanksss❤😂

[@TwoStrokeJ]

glad I could finally provide haha

[@cole2917]

J has like the sickest collection of casios and seikos!

[@TwoStrokeJ]

Haha so funny that people notice that! I got into watches about a year ago and so far Casio and seiko is basically all I have

[@cole2917]

@@TwoStrokeJ That sounds very similar to where I am in the hobby too. I have the same blue seiko 5 as you!

[@st.coiled]

great project! build a 100cc piaggio ciao next!!!

[@TwoStrokeJ]

100cc would be crazy!

[@st.coiled]

@@TwoStrokeJ dont know if you recieved my last reply or not but you can actually get a full 100cc engine kit with almost not having to do any adjustments to anything. would recommend it. its name a Simonini 47.6mm kit

[@osnariderz5075]

It does not have 100cc tho, its more like 85 or so​@@st.coiled

[@st.coiled]

@@osnariderz5075 yes, yes there is a 100cc kit. i have it installed on my ciao too...

[@jurman6000]

sick build🏍️🏍️

[@TwoStrokeJ]

Thanks man! Still a work in progress but it’s going to turn out sick

[@adham4770]

m not even into motorcycles yet m loving these videos

[@pepe_schnuerschuh]

why no upgrate to a 100cc kart cylinder and motoplat ignition?

[@moh4m4deerf4n.__4]

in asean you can see the best moped that 125ZR in my country have many moped 2 stroke we have RXZ 135,RR150,TZM150, and more 2 stroke moped in malaysia

[@XK4153RX]

Your smooth little barbie hands working on bike is hilarious 😂😂😂

[@DeanZandijk]

Im building one myself love it keep it up

[@TwoStrokeJ]

good luck!

[@pieterdealcoholist1493]

Man i love puch, and your channel ofc ❤

[@TwoStrokeJ]

I love you for showing support! Thanks man

[@benzinepomp7943]

Yeeheess, love from the netherlands

[@TwoStrokeJ]

The Netherlands inspire me with my moped builds!

[@benzinepomp7943]

Thats nice men, i have a tomos 50cc, my 65cc broke

[@woodlabstore]

come to indonesia bro... many moped out there... btw nice bike. cool