My New Stunt Moped Build Is Insane!

About time I finished up this build and got this video uploaded! In this video I take my moped from a frame and an engine, to a fully assembled moped ripper! As you can tell, a Moped project is truly never finished, so of course we still have some more work to do to dial this thing in perfectly!
Links:
PrymeMX cleaning wheels~
www.prymemx.co...
Moped parts all purchased from Treatland.tv
www.treatland.tv
My Merch!
shopjway.com
Thank you all so much for the constant support! I love you!

[@BIKELIFEAP]

Go buy a set of black zip ties you will appreciate the final product and finish plus it compliments your painted covers

[@TwoStrokeJ]

Yep white ones is all I had at the time haha but I’ll probably switch to black at some point

[@wiesvanberlo7141]

@@TwoStrokeJ and maybe some sleeves for the wiring harness

[@0ctagon_]

im glad someone else noticed it too because it botherd me the entire time

[@stijn7804]

check your exhaust manifold it is probably 25mm you can go to 28mm it helps for higher top speed Good Luck!

[@ap-mr3st]

great welds for the it being your first time

[@TwoStrokeJ]

Appreciate it!

[@kylebeckett2935]

thats what im saying dude those welds honestly are amazing looking

[@nightrunnerstv]

Factual

[@thunderlessemoto1209]

FUCK YEAH FINALLY MAXI CONTENT! Dude keep the maxi videos coming.

[@TwoStrokeJ]

There will be more brother!

[@davessparetime83]

The welder, use more heat and slow down the wire feed a little. Yopu need more penatration in the welds. The weld should look more dished than the raised bead. Get a Magnesium plate (Sparks) for the wheelie dragging. You want more RPM then increase rear sprocket size.

[@TwoStrokeJ]

Thanks for the advice brother!

[@dirtbikemike2956]

@@TwoStrokeJ you can hit the piece you want to weld with a blow torch before welding, it will help with, penetration😏

[@steammartian7705]

I’m not a great welder. But metal I pick up on pretty easy. That angle iron u could cut the sections out u want for flat stalk. And make it all one unit. Cut your pieces at 45 to make a 90. I think ya didn’t pretty well. I’ve only got down welding mufflers. So your doing better than I am 😂 thing it’s pretty cool. I give it to all of us who ride small bikes and make them wheelie. Doing the impossible. I stunted out a gs500 bud. People think I’m crazy and ask me all the time how I do. Know how buddy.

[@Jamal_sml]

Were back boys

[@TwoStrokeJ]

can't believe I always leave you guys hanging for so long

[@THISLOVETHISHATE99]

@@TwoStrokeJ u should switch to the Runleader Digital Tach Hour Meter Engine Temperature Gauge so u can also get RPM and TEMP and u may want to pick up the permakit cdi box from treatland i plan to get it for my kinetic tfr usa once i get a needle bearing crank and 46mm kit

[@noahsvejstrupharre6857]

well if you want more power a inner rotor ignition would help alot, trust me im danish. not that there is not more then that you could do, but its a good starting point (other ting you should/could adjust are: the Needell and jets, the ports in the cylinder, get the right squish, flow optimizing the block, stuff like that you know😁)

[@Rkoeb555]

Puch Maxi all over the World . Nice build .

[@NotVxlux]

Yo bro a year ago I hated these old mopeds and begged my dad to buy me a scooter then I found you and saw your Puch Maxi videos and I fell in love with these mopeds and you inspired me to get one and I finally found the one its a Tomos a35 yr 2000 and im going to get it on Monday. Thanks for uploading these moped videos

[@TwoWheeledPotato]

I'm not one for mopeds myself (i ride a vstar 650) but anything on two wheels is fun and i can get behind anything. enjoy and stay safe my friend :)

[@NotVxlux]

@@TwoWheeledPotato thanks You too :)

[@domcxz8643]

Your channel is a banger. I built myself a motorized bicycle because of you. Thanks bro ❤

[@TwoStrokeJ]

Thanks for the praise man! All love, hope you are enjoying that bike!

[@gabybikelifepr9188]

you know ia good day when J uploads a video

[@keksiman7203]

Damn that bike sounds good! My old finnish puch engined moped could never 😂

[@scarmanee]

the sounds remind me of when i use to take my 50cc motorized bicycle to high school.

[@dahlmasen3084]

Nice restoration👌🏻 Always nice to see old mopeds being restored instead of just destroyed👍🏻 I don’t really like the overall look of the bike with that seat and the modern lights, I like it more old school, I guess mopeds isn’t looked at the same in the US as in Europe though… But I’m not hating, it’s your bike and if you like it it’s a job well done👌🏻 And I understand that it’s a stunt bike and built for that and not for the looks😅 Everyone should do their build the way they like it👍🏻 I hope you’ll get the clutch and rpm problem sorted out soon and that thing will be so much faster! Mine does 49km/h with just an 3,5hp Airsal 50cc cylinder and a 28mm exhaust

[@jokestrokes]

Yeah puch maxi vids 🎉 greets from austria 🇦🇹 bout to get myself a maxi soon 😂🤘🏼

[@TwoStrokeJ]

Thanks man! All the way from Austria! Good luck with your own moped some day

[@pllepolle8162]

a suggestion to the power problem, based on my own experience, would be the gaskets leaving the piston too far from the cylinder head at TDC, sometimes the gaskets they send you are ironically too fat, the exhaust you have could also create a weird powerloss, due to it being a large exhaust on a bike with a crank and port setup for low-mid range power, definitely check for air leaks at the reed valve, the gaskets there are annoyingly often not good for the puch tuning parts, the channel "Puch Praxis" is german but has extremely many videos (with English subtitles) that are super valuable to anyone who wants a maxi 1 or 2 speed that can rock 50mph reliably. personally I've had a few maxis and other old mopeds, the best results I've seen on a maxi was 65cc polini mixed with a swiing cigar exhaust, 15mm carburetor and some offbrand electronic ignition, ran 45mph on a dyno with 6.5hp

[@kadenwhite9992]

those welds are accually really good for youre first time

[@naviramos]

Doing great!! 👍 Taking it there.

[@TwoStrokeJ]

Thanks man!!!

[@fightingfanproduction]

I love this channel. Great videos have been watching for a long time

[@wc7568]

double check your timing and spray down for air leaks. 16x44 with a treats reed, proma and powerdynamo should be HITTING hard at like 4k. Sounds a little lean to me. What temps are you hitting?

[@jesse4210]

Great video. Love my Tomos!

[@TwoStrokeJ]

I’ve been thinking about building a Tomos! Seems like it would be a fun alternative to my puch

[@Stolas1777]

Man my streetmate got rained on I have to fix so much there is not better feeling than balling down the street on a Tomos

[@billyking722]

You go for it young blood we all started somewhere you are doing bloody well enjoy the next project I am sure there will be many from UK

[@charlesgraham9954]

looking sweet bro, and sounds awesome. be safe, but have FUN.

[@timu_3727]

Fire video🔥much love from switzerland

[@TwoStrokeJ]

Thanks bro!!!

[@elchefe4586]

Vid was fire 🔥The rack looks sick! The maxi is looking sooo fresh 👌🏻🙌🏻💯

[@TomasCatarino]

Today is a good thay finnaly 2 stroke jay video!!!! Now we need the rmz 125 :D

[@TwoStrokeJ]

Coming soon!!

[@iwanawithyou]

yes, rmz125 in the puch 😆

[@Hellsatanx]

welds look good actually, nothing to worry about

[@shintokatana17]

I love this build. Very cool. I wonder if you can get your hands on a Simson S51 over there. Thats the number one old school moped here in Germany. Lots of tuning and huge aftermarket here.

[@TwoStrokeJ]

I’ve seen those so much and I would LOVE to build one, but they literally don’t exist here. It would be very expensive to import one, and all the parts for it, but maybe someday!

[@RDRISLOL]

Watching for 30 minutes is worth ❤❤

[@graffie]

That exhaust is 100% the issue. The tail of that pipe is like breathing trough a straw.

[@RanouttaTalent]

2 Things: a sandblast cabinet from HF will pay for itself in a few projects. Secondly they sell naked crimp connects, which along with some glue filled marine heat shrink, is the best of all worlds. It's what they gave us for factory harness repairs as a Ford dealer mechanic.

[@jonahcowans9073]

I have two original mopeds from Peugeot and Motobecane. The best way to get power is to put a racing centrifugal clutch on it in both 75cc, and 99cc setups water-cooled or air-cooled. Also run the original throttle they work amazing

[@Locos-del-oeste]

Fantastic video my friend like and Greetings from Argentina 🙋🏻‍♂️

[@loganclark9111]

Hey when your spray painting spray off the side of object then walk the sprayer to the object your working on and keep walking it until your off the object and then stop spraying. This will help you get less dripping and runs. Also those welds are realy good just keep practicing you will get very good at it also whatch videos on welding it will help.

[@thijsrehorst4040]

yo man fan from the netherlands here, as a clutch setup here we use ktm clutches from the 50cc ktm's hope this helps

[@shaquille_oatmeal125]

on danish moped they ship with a limiter by the variator maybe check that btw its a sick build

[@whirlybirdrc]

What you need is a KTM SX50 clutch set adapted for puch. Or a 3 claw atleast. The stock (even the ''upgraded'' ones are garbage) Like the look of the puch, that classic brown color is perfect! Greetings from The Netherlands. 😎

[@TwoStrokeJ]

thanks for the advice man! I wasn't sure if the 3 claw clutches were better or not. I did see the Kim clutches, I bet those are the real deal

[@Jeekinz]

Fab a mount for the TrailTech. Zipties are cheesy.

[@Nuketowngt]

nise man I Just Built My TTR 110 With a BBR 130 Bore Kit and i love it Nise Moped

[@TwoStrokeJ]

That’s sick man I bet it rips

[@Nuketowngt]

@@TwoStrokeJ dude i just Finished Watching your vid my Fav part Is The Wireing i thot it would be a pain in the ass I guess not Tho Pretty cool that its 2 stroke Nise build Probably the most sick Moped there is

[@Diodibrando]

Great job, your content inspired me to buy a moped and modify it,

[@TwoStrokeJ]

Good luck man! It’s hard work but very rewarding when you get things done right!

[@Diodibrando]

@@TwoStrokeJ Thank you, if you want to know what moped i chose, it's a Piaggio Zip Fast Rider from 1994 2 stroke 50 cc(yes I'm from Europe). For now i've done a 86 cc kit, bigger carb, clutch bell and weights(Polini), clutch springs (Malossi) and digital dashboard. Stock it does 35 mph, modified 67 mph which for mi is enough

[@CoyotePathkiller1998]

For never welding that practice weld was beautiful

[@jonahcowans9073]

After seeing where your at with it. Add heavier ball bearings to the clutch they should travel farther allowing you into the 60mph range

[@FutureKLX300SMowner]

i was just rewatching your old moped vids today! Was hyped asf when I saw the post noti 😂

[@TwoStrokeJ]

Let’s gooooi

[@swissjanu3455]

hey man, you got the proma cc exhaust on this bike, its a good exhaust for 50-65cc but not for your 70cc kit. The proma exhaust is only good for mid rpm power but not for high, and your cylinder is more for high rpm made. put a homoet p6 exhaust or something like this on it.

[@mandel4889]

Try upjetting until it 4strokes then go back until it stops. After that adjust rear sprocket

[@Hyrax_Matoi]

It seems you have a Proma CC 25mm exhaust. E50 70cc kit engines tend to run better on 28mm pipes. I would suggest trying a Homoet p6, or a Technigas Next. These exhausts pull a little slower, but tend to have higher RPM's. Might want to play with your gearing aswell. Hope this info helps you! Love your vids on the Maxi.

[@RDRISLOL]

Bro I actually love your videos ❤❤❤ I Fukin love it❤❤❤

[@neoolsson3697]

Ayee finally a new vid🔥🔥🔥🔥 Lowkey thought u was dead

[@TwoStrokeJ]

I thought I was too low key. Gotta get more consistent with the uploads

[@OLDSCHOOL-MOTO]

I myself have a puch maxi, all original and it hits about 30mph. and you have a 70cc, yours can go much faster if you tune it right 👍i think you can make it!

[@OLDSCHOOL-MOTO]

its not all original i think: 50cc 12mm carb 12 in front and 45 in back

[@_wolfwastaken_]

love the build and mostle the helmet never seen anything like it .

[@TwoStrokeJ]

Haha thanks man! I love my helmet too

[@Omgkhii]

The algorithm still loves you man😂🔥

[@TwoStrokeJ]

I hope it does haha glad people are seeing the videos still!

[@piinanen]

Have you mached ports? And I think it is running too lean but might be your mic but check that. Is your ingition timing correct? I might test different sprokets too. Good luck with that bike.

[@smokyofstormwind420]

18:28 those beads looked fine to me, but a grinder and paint makes me the welder I aint :P

[@TwoStrokeJ]

Ain’t that the truth

[@jeroenyoutube5621]

Puch maxis here in Europa are the shit

[@dillpickle_6931]

I’m 16 and recently put a 70cc kit on and I had your same problem only going 32 , try going up on your jet size in your carb bro I did that and added 15mph to my top speed. I went from 52 to 74 main jet it makes a huge difference try it bro I would love to see more vids of the moped!

[@lukaslaeng5413]

Go to switzerland there are a lot of moped riders there. I'm a moped rider myself and I love your Puch. Please answer me when you come to Switzerland. I would like to meet you.

[@Klemzi6945]

Ne 2stroke jay vid 🔥🔥🔥🔥 i legit got my first bike from the last vid to now

[@TwoStrokeJ]

lets gooooo I hope you are enjoying it!

[@starstencarl9110]

I think you need to choose a leaner main jet. If the Spark plug is already dark Brown, then try to set your egnitiona bit later. If anyone has any other tips, please comment. :) following you since 2 years, love your content

[@TwoStrokeJ]

Thanks man! I think it could be either the jetting or timing, maybe both. I will be checking to see how the spark plug looks

[@mikkelnageljespersen7399]

In damnark we love mopedes

[@TwoStrokeJ]

I love them too!

[@GwnSerchan]

Lets goo dude! Sick video. I stil think the exhaust would be a great upgrade also 19mm carb it could be bigger but then also might run hotter quicker

[@TwoStrokeJ]

thanks man! I was thinking about a custom exhaust., may get one in the future

[@nic5696]

Change the pin on the carb, put it 1 lower and look what it gives, its like it doesn´t get enough fuel at high rpm

[@Printcz_official]

Amazing video🔥🔥🔥

[@TwoStrokeJ]

Thanks man!

[@82puchman]

try diferend exhausts this one seems to limiting the rpm's probably due to the narrow tailpipe. and please shorten your cables to the right length, that looks so much better

[@TwoWheeledPotato]

28:19 read plugs and see what your mixtures are like, you probably need a larger main jet (maybe even by 3 sizes)

[@TwoStrokeJ]

yea I am definitely going to check the jetting

[@alekboi4016]

Hey man, I am restoring an old Yamaha ag100, all electricals on it is shot and its hard to find original parts, plus they are expensive. A video on how to do custom wiring harness would be good😅

[@stormer24]

idk why but it seems like the speedometer is the most fun part on a vehicle for me, if i dont see one its like all the life is sucked out of it JUST because i cant see how fast im going xD

[@TwoStrokeJ]

Haha I know why you mean. Maybe I’ll get a digital speedometer for it

[@stormer24]

@@TwoStrokeJ i think it would definitely improve your riding experience

[@IsacJo-jk6es]

Think it needs a bigger carb. When i have been tuning mopeds a 19mm was what i hade on 50cc sport cylinders

[@ThatGuythatComments_]

Twostroke carbs are super touchy it seems like its running a little rich

[@shortbus]

Great going! I'm slowly getting my 1978 Maxi looking and running new like yours. Hey, about painting the frame, what paint did you use and can I get the main decal onliine?

[@TwoSmoker]

We need an RM lot day video 🤣👌

[@dominik555666]

That exhaust limits it alot

[@joppy232]

That chamber is definitely going to limit your speed. My heavily ported gilardoni kisses 70 with tall gearing. You might want to conisder. Ive seen those 70 reed kits hit 50 with no problem as long as youre thorough on your case matching .Keep at it. Youll get there

[@morelcultivation9339]

try a bigger jet in the Carburetor or try move the needle.

[@waldmeier5788]

Just as a advice, buy a 3 jaw clutch (HK or DMP), then a better exhaust with a 28mm manifold (personally I rate some homoet p6, a cigar exhaust or a MLM) for your setup. Good luck and best regards from Switzerland✌🏻

[@TwoStrokeJ]

Thanks man! I may try a 3 claw clutch, maybe that could help! I want a different exhaust eventually too, but for now I’m going to work on perfecting the jetting and the timing first

[@BeamBinge]

That exhaust is made for low rpm, you'd probably be better of getting a different one. Loved the vid btw!!

[@TwoStrokeJ]

Thanks man! And that’s true, this exhaust is way better for mid range power, not top end speed. Would be interesting to experiment with different exhausts eventually

[@leandroklancar9051]

hey im from switzerland and mopeds are really big here i got my self a puch maxi with a 75ccm italkit maybe try using other clutch springs i would try the blue one with 15% harder then origianl i dont know if u got the same color but just look for 15%.

[@buildbros2088]

Need a cross brace from the seat post

[@LeePackers]

I was waiting for you video for so long finally I am happy keep on going please please you are the only youtuber who is notification is on in my device

[@LeePackers]

Love you so much brother from India

[@LeePackers]

I am watching your video from 2 years finally

[@TwoStrokeJ]

this is amazing to here man! Your got me motivated to start working on the next video!

[@TwoStrokeJ]

all love brother

[@TwoStrokeJ]

I appreciate that!

[@AnthonyMalik-ls4ni]

Should’ve painted the exhaust black too

[@crazybannanas7430]

Anybody else find these videos underrated for what their worth?

[@TwoStrokeJ]

Glad you enjoyed man! Thanks for the kind words ❤️

[@jokerop9589]

Love you video brother

[@nszabados]

look forward to these uploads :)

[@TwoStrokeJ]

So glad I got you guys to watch my hard work!

[@nastynatesscooters9896]

Cool video

[@DoktorANuBiS666]

maybe a 3 pad clutch and new clutchcage will do the job. but look for some racing cage,in my original one the brass center gets eaten all the time. :D

[@TwoStrokeJ]

Yep I replaced the brass center but maybe a 3 pad would help

[@Double_Platinum_Dante]

Hot Rod!!!!

[@2T-projects]

dude after watching this video I cant decide if I should buy a supermoto or a moped

[@TwoStrokeJ]

My opinion is a supermoto bro! Mopeds are fun second bikes but I’d rather have a supermoto

[@2T-projects]

Aha ok thanks I was thinking about a Rieju mrt 50 is that good or should I pick something else. I kinda want a 50cc cause they are the best little rippers

[@2T-projects]

At the same time I’m limited to have a 50cc legally

[@smyles829]

pls buy more puch or maybe ciaos and tune them to the max keep it up!

[@zelousrpw]

it could be the exhaust size or/and ignition like the stator CDI or coil it can be a problem

[@pascal1823]

Really cool build. But i just dont like the led headligh. There are round ones that just look soooo much better

[@TwoStrokeJ]

I prefer the round look too. I tried an LED bulb in the stock headlight but it still just was not bright enough. The current light bar setup is wayyy brighter but I still want to find a more stock round looking LED light

[@jelleroom9425]

Let’s go your a legend

[@TwoStrokeJ]

No u

[@Poulsen8900]

an electronic ignition would definitely help it rev more with no rev limiter and pick up speed faster 🙂

[@TwoStrokeJ]

it has one man! The power dynamo ignition is electronic, its just not an inner rotor

[@Poulsen8900]

@@TwoStrokeJ oh my mistake thougt it had a platnium ignition😅 but on Old mopeds like a puch maxi you have to decide if you want bottom end, mid range or top end since it is only one long gear its not like a scooter where you Can change all the cvt and male it pull all the way unfortunatly but great work Been watching your videos for a couple of years now and im happy that you startet uploding again greeting from denmark🇩🇰

[@jesse4689]

i got the same problem with my clutch been at it for like 2 months hahaha

[@TwoStrokeJ]

yep welcome to the moped life

[@maki2543]

I would try adjusting the carb.

[@TwoStrokeJ]

I think I will. thanks man!

[@youngphil8766]

Sick bro

[@TwoStrokeJ]

Thanks man!

[@bormashinata1789]

check your exhaust manifold it is probably 25mm you can go to 28mm it helps for higher top speed IM NOT THE ONLY ONE WHOS GONNA TELL U THIS

[@sido9537]

I recommend you change the gear on the wheel for better acceleration and more rpm's

[@loladiner2758]

In switzerland every 14 year old country boy has one 😂😂 me too I have a sachs 503 gt 2 speed hand geared those are legendary and the manual clutch grips better so you can make better and easier wheelies 😅😊

[@spongeimperium126]

Do you think a menarelli gas bike cylinder would fit on there?

[@jordandoesmx9862]

dont you just need really tight clutch springs to make it rev faster off the go? get some stage six ones like they put on mopeds

[@ikonatafun681]

Legend is back🎉