Finally a video for people that have never done crown molding most videos do not explain it nearly as well , I thank you for the confidence to now try it. GREAT VIDEO
@fultonfinewoodworks2 жыл бұрын
Thanks for the feedback! Good luck!
@sherylessenmacher505911 ай бұрын
The best by far video of installing crown! I followed your instructions and my room looks amazing. If a woman at 75 can do it anyone can. Thank you
@fultonfinewoodworks11 ай бұрын
So great to hear that it helped you out! Thanks so much for sharing!
@charisma-hornum-fries5 ай бұрын
If you can do it then I can too. I'm only 47 but that's not an excuse whatsoever.
@scottlowe40884 жыл бұрын
By far the best how-to video on crown I've seen. Keep up the good work.
@fultonfinewoodworks4 жыл бұрын
Thanks so much for the feedback! That was the goal, it’s a complicated concept to explain but once it clicks you have it! (I plan on doing a crown molding advanced techniques and tips next.)
@alanb.47592 жыл бұрын
This must be one of the valuable crown molding tutorial videos out there! The way you've documented each thing you've done, why you do it that way, and as a bonus, in an old house that isn't square and how to tackle that too. A huge Thank you!
@fultonfinewoodworks2 жыл бұрын
Thanks so much for the feedback, so glad it helped! Fyi I am currently planning a part 2 video to cover FAQs and additional techniques, stay tuned!
@jennyanimal90464 ай бұрын
My dad always said upside down and backwards is how you want to cut crown molding. My dad was a Master Carpenter master furniture builder master welder rail maker in a master hot rod mechanic. Rest in peace, Father
@HowardLangston-u3e9 күн бұрын
Same as my dad he always told me I was upside down and backwards that I would be perfect to do crown molding
@colosistvan2 жыл бұрын
Thank you for sharing all this, an essence of your 25 years experience, for free for all! It was insanely valuable in every detail, every second of it. First time in my 45y life I donated for any tutorial material :) I have been struggling with crown moldings and baseboards for weeks in my Budapest apartment.
@Zacharythorsen7 ай бұрын
Jesus Christ died for all of our sins. He died the death we all deserved. He was the perfect one who never sinned once, but he loved us so much he decided to die for us so our sins would be paid for and we can enter the Kingdom of Heaven before God the Father blamelessly. He is the living son of God who wants to know us and have a personal relationship with us. No matter what you have done no matter how far gone you think you are Jesus can and will save you. All you have to do is confess with your mouth and believe in your heart that Jesus Christ is your Lord and Savior. Believe that he died on the cross for your sins and had a bodily resurrection 3 days later. We cannot be saved by our works but by faith in Christ alone. Repent and turn to Christ. You will have joy, happiness, love, and peace beyond understanding.
@Adam-l8u4b5 күн бұрын
Awesome Video, I worked on one room today, then watched this video and realized all of the solutions to the problems I encountered. Thank you!
@fultonfinewoodworks4 күн бұрын
So glad it helped you out! Thanks for the feedback and for watching!
@JeremiahL161610 ай бұрын
I am a finish Carpenter and this was about the best video out on the internet for doing crown. I would do exactly the same. The only diff is i use a laser tape when alone and a sanding pad on a grinder to sand the cope after hitting it with the hand saw or jigsaw! Great video! 👍
@fultonfinewoodworks10 ай бұрын
Thanks for the feedback - I use a laser tape regularly as well it's very handy! I have about 5 Bosch ones mainly because I lose them and then find them later on after I buy another..
@JeremiahL161610 ай бұрын
I done the same. Ive bought 4 or 5 now and who knows where i left them! 😊
@ErgoCogita2 ай бұрын
Absolutely! Sanding pad on a grinder is one of my dirty little secrets. If you have a steady hand you don’t even need a coping saw or a jigsaw.
@drswife8458 Жыл бұрын
Thank you for saying build the outside corner first and cope the inside! Soo much easier!!! ❤❤❤❤❤
@tablet2016 Жыл бұрын
One of the best videos on crown moulding . Could be fewer ads buts worth it.
@fultonfinewoodworks Жыл бұрын
Thanks so much for watching!
@thomasglenn49553 жыл бұрын
Man...you're an awesome guy to let us in on your magic. Your work is beautiful
@fultonfinewoodworks3 жыл бұрын
Thanks so much, will be releasing some additional videos soon!
@JK-kf9juАй бұрын
I finally found a video well explaining on measuring the distance and where to mark it on a crown molding! Thank you!
@MadamePele-dr6yh7 ай бұрын
Beautiful video - you slowly and carefully with great detail, explained exactly how to do crown molding for someone who has never even done it. Even a professional could learn something from you.!
@LukeKamely7 ай бұрын
Dude, you are a legend. I've probably watched 1.5 hours worth of crown moulding installation videos tonight and came out of each one of them with more questions than I did going into it. You explained everything perfectly. I particularly appreciate the info on measuring to the wall side and how to do a mid wall joint.
@jeffakin8231Ай бұрын
I Thoroughly enjoyed watching this video. Thank you and keep em coming! You seem like a Rad dude..
@trevortoms Жыл бұрын
Best video that I have seen on this subject. Thank you!
@fultonfinewoodworks Жыл бұрын
Glad it was helpful!
@sandramatthews59865 ай бұрын
Thank you so much for making this video and keeping it up. Thank you for taking the time and explaining everything very well for a beginner to understand. Really appreciate it.
@Alex-nc3yk Жыл бұрын
This explains crown wso well! I can now understand it so much better!!! Thank you for taking the time to make the video and posting!
@fultonfinewoodworks Жыл бұрын
So glad it helped! It's a difficult concept to explain but it does get easier with some practice!
@docdoctme6 ай бұрын
Wow! One of the best crown molding videos. Thanks for sharing your talent.
@bobjerman59811 ай бұрын
Great video for the beginner on installing crown moldings. Thank you so much for a very informative video.
@fultonfinewoodworks11 ай бұрын
Thanks so much, I am currently planning a part two updated video, it will answer many questions I have had since posting .
@jonjoygaba3 жыл бұрын
The best demonstration I’ve seen so far. Thank you for this
@fultonfinewoodworks3 жыл бұрын
Thanks for the feedback glad it helped!
@stephangonyo77732 жыл бұрын
I just finished Placing crown molding in my master bedroom. This is a log cabin and my crown is clear finished. The ceiling and walls are very uneven. Several places I had to use wood putty to fill in the cracks. But I sure wished I would of viewed your video before I started. Very well explained. This was the third room I crown molded. ^The other two room were small enough to have no seams. I would then measure with measuring sticks, that was the only way I could get accuate measurments. Great job.
@ModdedProfessor5 ай бұрын
Thank you. For your knowledge and careful break down of the steps and processes and why they're necessary
@josephfaubion87105 ай бұрын
A very good explanation and video. I had two 90 degree angles (Headboard) and so 45 cuts worked perfect... Thanks...
@revon052110 ай бұрын
Excellent work. I find caulking more efficient by pushing the tube along the work rather than pulling; seems to fill the gaps better. Also, coping can be done effectively on a table saw and fine tuned with a 4-in-hand rasp and utility knife. Thanks for sharing your expertise.
@husky48292 жыл бұрын
Excellent..I watch a ton of videos, this guy knows how to explain things
@fultonfinewoodworks2 жыл бұрын
Thanks for the feedback, glad you were able to follow, crown molding can be so confusing without a doubt!
@sky2k3162 жыл бұрын
Awesome!! Now I feel confident enough to finish my renovation. I just started base board and window/door trim finally got a hang of it. This is by far the best video I've seen on KZbin for doing crowns 👑 cheers!!
@fultonfinewoodworks2 жыл бұрын
Thank you so much for the feedback glad it helped!
@peacehameline9419 Жыл бұрын
Thank you! Your instruction is straight foward and easily understood. Thanks again.
@fultonfinewoodworks Жыл бұрын
So glad it helped! Thanks for the feedback!
@DiannaAtherton3 жыл бұрын
I had to watch your video a couple times especially the flipping over before cutting. I got it. Thanks
@fultonfinewoodworks3 жыл бұрын
Thanks for the feedback, it’s a confusing concept but once you get it, it’s like riding a bike once you pull it off you get it. It gets easier the more you do.
@Hugh2132 жыл бұрын
Thank you, thank you, thank you! I’ve created a lot of scap wood in my attempts at crown molding. This vid was worth the time to view and get relative instructions. I finally applied your methods and successfully completed my first room.
@fultonfinewoodworks2 жыл бұрын
So glad it helped you! You have to burn through some expensive material but once it clicks your mistakes go way down! Congrats on your first room!
@addisonbrown26642 жыл бұрын
Best video on the subject. Very thorough. Thanks.
@fultonfinewoodworks2 жыл бұрын
Thanks so much for the feedback, glad it helped!
@creativebill20124 жыл бұрын
Great explanation of coping. You make it look easy :-)
@fultonfinewoodworks4 жыл бұрын
Thanks! I am glad it helped, once you understand the concepts it can be easy with practice.
@ringsidejudge4302 Жыл бұрын
Excellent demonstration and explanation of this process . The only thing that I am not sure of is the backwards element . Upside down is easy understood but the backward part always has confused me . The idea odfthe two sample cuts is great tip and is fool proof for me as a DIY er . The last small job I done left me frustrated as I started off with a good length of moulding and was panicking after I messed up most of it .
@drswife8458 Жыл бұрын
Outside corners grow bigger then your measurements!!!!! Omg omg my brain finally said Ahhhhhhhh!!! Thank you!!
@fultonfinewoodworks Жыл бұрын
You are so welcome!
@WilliamPrince-19654 ай бұрын
22:56 First, thank you for a great vid and instructions. Some, like myself, enjoy learning something new. I’ll never be a professional, but nevertheless, I love doing new things. My question is about a double cope. You said to measure wall to wall. When I did this, it was about 1/2” too long. I cut my first angle, then when I measured the length on the crown, I moved the end of the tape over to 90 degree line on bottom like you did when measuring for your outside corner. I did cut the bottom at 90 degree while doing the cope, as instructed. Can you give me a little more detail on how to measure for a double cope? Thanks again
@bobjackson37353 ай бұрын
I have the exact same question!
@robertboeckmann111110 ай бұрын
Very helpful - masterful work explained very clearly. Thank you!
@fultonfinewoodworks10 ай бұрын
Glad it was helpful!
@frankdelao34522 жыл бұрын
Thanks for the info, 😊this video is 100% excellent.
@fultonfinewoodworks2 жыл бұрын
Glad it was helpful!
@AngelaLowe-w7o4 ай бұрын
Thanks, this is a great video, and I learned a lot.
@ErgoCogita2 ай бұрын
Excellent demo!
@fultonfinewoodworks2 ай бұрын
Thank you! Glad it was helpful!
@SableSunsets5 ай бұрын
YES THIS IS WHAT I NEEDED THANK YOU!!!
@timlawlor51449 ай бұрын
Very Good Information, excellent tutorial.
@fultonfinewoodworks8 ай бұрын
Thanks, so glad it helped! I have a part 2 on my to do list for the near future
@mattkasicki3014 ай бұрын
Excellent explanation !!
@macshabaz14634 ай бұрын
excellent teacher, best video FIVE stars
@BD_Ozarks5 ай бұрын
Thank you for the video (3 years ago). Do you nail the top edge of the crown to the ceiling?
@JesusMartinez-bx8dh7 ай бұрын
Can you install crown molding on a room with a cathedral ceiling design and find the angle if possible! Thanks a lot. Your video is so helpful!
@jblood982 ай бұрын
Excellent Video! Do you only nail on the wall side and not on the ceiling? If ceiling too, do you nail into trusses or joists? What about edges where a ceiling joist is not available (i.e. parallel)?
@docdoctme3 жыл бұрын
Great video with detailed explanation! Thanks for sharing.
@fultonfinewoodworks3 жыл бұрын
Thanks for the feedback, glad it could help!
@zachshott78332 жыл бұрын
This is definitely tricky business, but you give a very detailed explanation. I have my work "cut out" for me
@fultonfinewoodworks2 жыл бұрын
Ha ha! As long as you take these concepts and practice it, you will become proficient fairly quickly with it!
@EddieCamacho-q4z2 ай бұрын
Awesome technique
@goodtobehandy2 ай бұрын
One thing I would add. Is where you place the scarf joint. You've done the stud layout. So pick where the joint will sit over a stud. That way you can put a nail on both sides of the joint. A 1.5" to 2" pin nail at the top and bottom works great. Shot the pin at a slight angle to the center of the joint.
@fultonfinewoodworks2 ай бұрын
Good point, I am working on a v2 crown molding video to answer a lot of common questions and additional info. I will be sure to clarify this point
@terrypapineau69936 ай бұрын
Dumb question. Toward the end when about to do the coping cut on the inside corner you put an initial mitre cut (prior to coping). What was the angle
@mackyhowy8581 Жыл бұрын
Thanks for sharing. Much appreciated. I'm a newby to crown and got through my 1st project with a just a few mistakes but recovered well. I found that coping was a hassle and just measuring the cuts so the inside corners blended / flowed into each other was much easier. Just wondering why you did not just cut the insider corners vs coping? Again to me it seemed much easier to just make the cuts. I messed up more crown trying to fiddle with coping the insides. Thanks
@fultonfinewoodworks Жыл бұрын
I double mitered forever nothing wrong with it, I have just found I can spring a joint much tighter with coping. Another nice thing about coping is say a inside corner is 88 or 92 degrees you can still cut at 45 and cope and it will fit. You also get to cut one with a flat cut which saves time. Double miter requires exact and the wider the molding the easier it is to have a gap at the top or bottom. Coping also allows for future wood movement and makes any separation less noticeable.
@danielpullum19075 ай бұрын
Nit pickin, the sound in that empty room did not work well on my computer... Thanks for taking the time and sharing your experience...
@fultonfinewoodworks5 ай бұрын
That's was about 3 years ago, my audio game has improved now, I hope to make a part 2 video this winter to go along with the original video - stay tuned
@RoadKing225 ай бұрын
Great video. What is the portable table that you use? Thanks
@fultonfinewoodworks5 ай бұрын
Thanks. It's a Paulk style workbench that I made, Ron Paulk sells plans for it if your interested.
@jaymoreira348611 ай бұрын
I do crown for long time, but, thanks a lot for your video
@fultonfinewoodworks11 ай бұрын
You’re welcome 😊
@nicholasrichardson23308 күн бұрын
Fantastic video! I’m fairly handy but have yet to tackle crown moulding. Now I feel ready. My only question is what are the pros and cons to using wood crown moulding vs MDF. MDF looks like it might be easier to work with when coping with an angle grinder. Thoughts???
@fultonfinewoodworks8 күн бұрын
Thanks, glad the video helps. Mdf is more brittle and dustier, it's also softer when coping, I prefer solid wood or pre primed finger jointed softwoods. Recently the big box stores started calling mdf trim "Premium" which makes me dislike MDF trim even more.
@jamesderoc67172 жыл бұрын
that scarf was not on a stud? i guess with the glue its not necessary. im installing around cabinets in an old house. the ceiling is over an inch off from one end to the other . i need to hold a level line because the cabinets are level. would you rip the crown where the ceiling is low or start from the lowside and leave a gap to the ceiling where it is higher? excellent instructor thank you
@d1nonlysnshn Жыл бұрын
I don't believe a scarf needs to be on a stud. That wastes time and material. Molding is fairly lightweight and has generally many other fastening points on studs where the effects of not having the scarf over a stud is fairly negligible.
@splanzza6 ай бұрын
Holy guack is this a helpful video! 👍👍👍
@gizmobently2 жыл бұрын
Thank you for sharing your experience installing crown molding. I appreciate it as everyone has their own methods. I can only say that doing white crown allows for a much easier application and time. I am by no means a crown expert, and defer to your experience. A few things to mention and ask if doing this already prefinished with varnish. I am currently doing a house that requires crown application in a natural finish and varnished. I am varnishing prior to cutting and putting on. I seem to have problems with the alignment in wall to ceiling. If you were going to do a job that required no filling of joints since it was going to be a varnished finish, how would you best keep that crown running nice and true, as once you get to those corners, they have to be sitting in plane to one another to get that perfect fit since you are not going to be able to do any filling in, other than caulking the crack from the walls or ceiling imperfections? Would you snap any lines on the walls at all? I do let my inside corners run un-nailed until I meet them up. I also have been butting any long runs together with biscuits to get a perfect fit and keeping it perfect when nailing, as I cannot touch the joint to fix anything once put on. I guess there are different ways of doing crown for different applications. For your job, you did the best thing. For me that would not work well. For cabinets or small one piece rooms, I would not do any coping and would fit and nail before putting on the cabinet tops. I also have to use a cutting jig as those cuts cannot be off at all since I cannot get any cuts not fitting perfectly. And my most important tool that is absolutely necessary is a number 49 and 50 Nicholas patternmaker's rasp. I could not do this type of work without these rasps to dial in the fits. Any comments or suggestions or doing pre finished varnish crown? I guess you could always do it unfinished, but I have tried it that way also, and it is too time consuming to go back and sand and varnish up that high for me anyways. The inside and outside corners still have to fit good as you still cannot caulk them up and varnish over them without it showing terribly. Man, that white finish is a lifesaver for us carpenters anyways.
@fultonfinewoodworks2 жыл бұрын
Hey sorry for delay I missed this one. For stained molding I always cope inside so I can get as tight of joint as possible with minimal chance of opening later. I make sure I am very accurate with measuring the outside corners so they are tight as well. I make sure the molding is level all the way around the room on the walls and I ignore high places on the ceiling and leave a gap. This gap can be filed in with mud on the ceiling and feathered out but for minimal gaps caulk can be used and no one will ever notice. It's noticeable when the wall side is not level however thats why it gets priority.
@d1nonlysnshn Жыл бұрын
I did not see him address the part regarding varnishing prior to installing...it would be near impossible, difficult and messy to stain, sand and varnish. I stained, sanded and varnished all the crown molding for our older house reno in early 2019 BEFORE we installed it. I shudder just thinking about doing it after...I chose to match the stain to the floor, which is Jacobean and ebony mixed together...what a mess on the ceiling and walls, then the sanding with dust everywhere, and the weird way of working with your arms overhead...yikes...and very unsafe to boot. Better to do all the staining, varnishing and sanding BEFORE installation. You can keep all the mess confined to your work area and be safe and comfortable to boot.
@theofarmmanager2673 жыл бұрын
Excellent video. I was told that you should always go for one “butt” cut and one cope cut on each length where there are the inside corners of the room. That avoids having to do a double cope which is the hardest of them all. The walls I’m about to start to cove are masonry which makes life a lot harder; I don’t know of a better way than to use fast grab adhesive on the back of the cove and use masonry nails into the wall representing the line of where the cove hits the wall. Effectively, you have the masonry nails as a temporary shelf to lean the cove onto until the grab does it’s job. Please tell me better ways!
@fultonfinewoodworks3 жыл бұрын
Thanks! Your on the right track that will work, one other option you could install a piece of wood against the brick fastened with Instagram and tapcon screws around the perimeter that allows the crown to sit over it. Then when you install the molding you have a nice place to nail into. If you rip an angle on the wood you can get even more wood behind it. Just make sure you allow a space inbetween so it doesn't get in the way of the molding.
@theofarmmanager2673 жыл бұрын
@@fultonfinewoodworks wow, that was quick. Could you please give a little more detail on using instagram as a cove adhesive? Seriously, my next coving job is a complex (multi-part) solid oak (home moulded) cove around the entrance room in the barn now nearly fully converted. There will be dentil, bed, cove mouldings all combined in a Tudor style. For this, I am planning to put up a softwood form that goes behind the oak mouldings: it will triangular but with clipped corners - something like 1” vertically down from the ceiling; 4” at an angle and then 3” horizontally from the wall. I’ve yet to make final decisions on the mouldings and I need those before making the form that will support all the mouldings. But, if I get the form right, it will make fixing the oak much simpler. One issue with real timber is that caulk and paint isn’t an option.
@litmim413 жыл бұрын
0 itty
@ezautorepairs5 ай бұрын
Thanks for the informative video.
@Melfius6 ай бұрын
How did you get 47°? My saw maxes out at 45°.
@brandonleneave46512 жыл бұрын
So every corner will be butted to the wall with one coped side?
@fultonfinewoodworks2 жыл бұрын
On inside corners, I try to always do that correct
@juanojeda29822 жыл бұрын
Did you have to cope that piece? Could you if just did a normal miter on the inside corners ?
@fultonfinewoodworks2 жыл бұрын
Not a must to cope, you can do a normal miter on inside corners. I just like how tight I can get it when coping also its great for stain grade moldings, as caulk is not an option.
@olsonlr2 ай бұрын
I try to take into consideration which way most people will view the cuts and make the straight cuts on the most visible walls and the beveled or mitered cuts on the walls sloping away from the main view direction. This way you cannot SEE INTO the cracks.
@fultonfinewoodworks2 ай бұрын
Very good point, I have learned this trick over time as well. I am working on an updated crown video this winter. I will be sure to include this.
@dinacarroll9211 Жыл бұрын
Excellent video
@fultonfinewoodworks Жыл бұрын
Thank you very much!
@chefabhishek16 Жыл бұрын
Hi, If I need to cope both ends of the crown then am i measuring from wall to wall or end of the butt crown to the opposite end? Hope it makes sense. First time doing crown and your video is helpful. Thanks Abhi
@fultonfinewoodworks Жыл бұрын
All your measurements are referenced on the bottom of the molding. While on the saw because the molding is upside down this will be the top. This is handy because it's easy to see your mark and where the blade needs to cut. To further answer your question you measure from the butt to the location where it will touch the end of the wall the angle does it's own thing either growing or shrinking past that point.
@MaxArline2 жыл бұрын
solid explanation. thank you.
@davidlindgren76053 ай бұрын
Ronnie, do you ever use a backer in the corner to nail to?
@fultonfinewoodworks3 ай бұрын
I sometimes do when stain grade, but when painted and knowing it will be caulked where it meets wall and ceiling, it's not going anywhere as that acts as a glue as well.
@davidlindgren76053 ай бұрын
@@fultonfinewoodworks ok, thanks, good point about the caulk also acting as a glue. I also liked your tip about shooting the nails at an angle, which should help hold the crown in place better than nails shot in straight, especially if they are only going into drywall or plaster.
@jeffsimpson19992 жыл бұрын
Great video - quick question to confirm my understanding of the correct miter angle setting when cutting for an inside corner. For the piece the will later be cut with a coping saw, are you setting your miter saw to 45 degrees to make the initial cut to length?Thanks!
@jeffsimpson19992 жыл бұрын
Or in other words - what angle is the miter saw set to at 17:30 of the video? Thanks
@fultonfinewoodworks2 жыл бұрын
Thanks. You are correct that cut would be a 45 for a standards inside corner that is being coped. You follow the same rule as cutting half of the actual angle and the other side is cut at 90
@DustinMercer Жыл бұрын
excellent job
@fultonfinewoodworks Жыл бұрын
Thanks!
@DonJulio464910 ай бұрын
What kind of dance style is this called ?
@fultonfinewoodworks10 ай бұрын
Crown yoga?
@thenexthobbyАй бұрын
I like the logical process of miters first, copes second. "Make the inside cut ..." always 45 degrees, yes? And the coping takes care of the rest so that you don't even care what the actual inside angle is, is my understanding.
@fultonfinewoodworksАй бұрын
You are exactly right issue a 45 on a relative 90 angle then the cope covers the rest.
@RelicAgent2 жыл бұрын
Great video best way said
@carlboudreaux Жыл бұрын
Do you know the difference between looking into a joint and looking over a joint.....and most people frown on putting a joint so close to to another joint...on a 14 foot span the joint should be around 7 ft mark
@fultonfinewoodworks Жыл бұрын
That's totally subjective on almost every install I do the 7' mark would place it at the center of the run. I would much rather put it somewhere in the first or last third of the run. If installed correctly the seam shouldn't matter anyway.
@fultonfinewoodworks Жыл бұрын
On looking in and across the joint, for sure joint direction matters and is always something to consider
@carlboudreaux Жыл бұрын
@@fultonfinewoodworks I believe most trim carpenters would disagree
@carlboudreaux Жыл бұрын
@@fultonfinewoodworks addiñg info on dirrection would have been a nice addition.....or maybe an idea for a future vid
@fultonfinewoodworks Жыл бұрын
@@carlboudreaux this trim carpenter does it this way, it's nice to be my own boss!
@davidmontalvo6560 Жыл бұрын
How about those huge gaps between the wall and the ceiling? That’s a lot of caulking that would have to be pumped in there no?
@fultonfinewoodworks Жыл бұрын
Sometimes a gap in the ceiling is unavoidable when the ceiling has a dip or is uneven. What I have found is always keep the molding running in a straight line and deal with the crack in a few ways. Caulk if it is under 1/4" and painted. Another option is to float the ceiling with drywall mud to level out the spot that goes in.
@davidmontalvo656011 ай бұрын
Thank you my brother@@fultonfinewoodworks
@reygm3639 Жыл бұрын
Is there any difference cutting it flat ?
@fultonfinewoodworks Жыл бұрын
Cutting it flat requires you to bevel the side to side bevel of the saw blade as well as rotating the angle of the saw. This requires a compound miter saw and the bevel angle depends on the type of molding being used. I find it much easier to cut it in the manner I showed. This is called cutting it in position.
@bobbycrider1996 ай бұрын
You started out stating how important it is nailing the molding on the studs, then you put the splice between studs. The double out on top of the studs is low enough to use. Glad you be leave in coping inside corners. I am a retired carpenter of forty years. I was taught to, first, build a miter box. I hand drove my nails for many years. When using a miter saw, I always cut flat, even in odd angled corners. I always left that bottom tab on. Leaving it on, will make others thank that it is a mitered corner. Glad you take pride in your work. Most carpenters now days miter all joints. Time is more important to them, than quality.
@govnor2 жыл бұрын
Great no nonsense and easy to follow video! Thx! BTW I love your work bench top, where did you find it?
@fultonfinewoodworks2 жыл бұрын
Thanks! I made the workbench, it's based on a Ron Paulk design you can search for a video on it on his page.
@grocerylist2 жыл бұрын
Great video! Would you be able to give me pros/cons of using wood vs MDF?
@fultonfinewoodworks2 жыл бұрын
Thanks. Wood is less dusty than MDF and lighter. MDF can break. The advantage of MDF was at one time it was half the cost of wood trim but at some point store started calling it "premium" because it was smooth and charged more than wood so wood wins in my book. If it will better painted finger jointed pine or poplar usually a great choice.
@ProGreenNRGIncTemecula11 ай бұрын
10% of the folks watching would ever attempt to carve the meat out with your method, we do though. Nice video brother.
@mr.m26953 жыл бұрын
Great video
@fultonfinewoodworks3 жыл бұрын
Thanks! Glad it could help!
@brandoncyoung2 жыл бұрын
Great video thank you
@TheWpruss7132 жыл бұрын
This video really helped me alot! Thank you also what kinda watch is that? ORIENT?
@fultonfinewoodworks2 жыл бұрын
So glad to hear it helped! It's a Rolex Explorer 2
@TheWpruss7132 жыл бұрын
@@fultonfinewoodworks OH Wow! Boy was I off. Lol
@fultonfinewoodworks2 жыл бұрын
@@TheWpruss713 it's been a great watch worn everyday for 20 years!
@TheWpruss7132 жыл бұрын
Sure looks nice and u deserve it! Maybe one day. Thanks again!
@fultonfinewoodworks2 жыл бұрын
@@TheWpruss713 good luck on the install and let me know if you run into any problems. I am going to make a part 2 video soon that I am going to cover answers to the FAQ's from the video
@averyslife63142 жыл бұрын
What’s a appropriate price for hanging crown molding? About 300 liner feet
@fultonfinewoodworks2 жыл бұрын
The cost could vary wildly depending on the overhead of who is doing, the variables of the job, the region the job is, the logistics of the job, so many factors
@brendadunn91094 ай бұрын
Thank you
@bucky50635 ай бұрын
Great video thx
@teodelfuego3 жыл бұрын
Good job
@fultonfinewoodworks3 жыл бұрын
Thanks! Hope you found it helpful.
@marlothecontrarian6747 Жыл бұрын
Thorough. Thank you.
@fultonfinewoodworks Жыл бұрын
Glad it was helpful!
@BigmoRivera3 жыл бұрын
Great Job Nicely Done 👍🏽🔨📐
@fultonfinewoodworks3 жыл бұрын
Thanks 👍
@Adam-ui3ot Жыл бұрын
Superb.
@fultonfinewoodworks Жыл бұрын
Thanks a lot
@Rogueknowledge8 ай бұрын
Thanks
@christopherhubbell90053 жыл бұрын
Exactly the way my father taught me 40 years ago. Upside down & backward. Cut off the face of the inside corner and push it into the butt cut piece. I tried to explain this to an experienced carpenter who uses the presets on the miter saw and never gets a good corner!
@fultonfinewoodworks3 жыл бұрын
Your Dad is smart man! Awesome to hear! I get comments about double mitering inside corners is better but I have installed both ways many times and this way I have found stands up to test of time for sure. A lot of trim carpenters never see the work they install 1 or 2 years later. I learned in my own home and experienced the surprise cracks 1 year after install. Led me to finding a better way.
@MoldyKumquat711 ай бұрын
3 years and still having new views lol I was about to cut crown and after messing it up SO many times at my previous house I decided to figure out the right way
@danthechippie44398 ай бұрын
27 degrees is half of 94??
@fultonfinewoodworks8 ай бұрын
This video was posted 2 years ago, your going to have to give me more than that, I don't recall that info being in there.
@danthechippie44398 ай бұрын
@fultonfinewoodworks hi, sorry i thought you mentioned that the corner wasn't or never is at 90 degrees, so you mentioned the true angle which was more than 90 , but you said half the true angle was 27 i think
@CTRwannaB2 жыл бұрын
I do Crown once in a blue moon and yesterday and today I struggled but finished Wish I knew these tips earlier 🥲 Tough using a 7 1/4 miter and rigging up scraps and a jig 😂🤦🏻♂️
@fultonfinewoodworks2 жыл бұрын
Thanks for watching and glad it can help!
@Json5472 жыл бұрын
I’m not really understanding why you have to turn it upside down. Can’t you place it up against the fence right side up and cut it that way?
@fultonfinewoodworks2 жыл бұрын
The angle and measurement always starts from the wall and that's where the mark is on the molding. The angle then grows or shrinks from that mark. If you did it in reverse you would have to calculate the distance plus or minus length and cut back to the actual dimension. It would add a difficult extra step to be accurate.
@Json5472 жыл бұрын
@@fultonfinewoodworks thanks going to try to tackle a small powder room. All inside corners was going to try to miter cut as the angles are pretty good in the wall corners but maybe I will try coping. Thanks
@fultonfinewoodworks2 жыл бұрын
@@Json547 I mitered it forever before I started coping you can have success with that method but caulk is sometimes more required. For stain grain molding coping is almost a must. To save material cut two 1' pieces and test out the corners before cutting the full length. Remember to follow straight lines on the wall and ignore uneven ceilings that can be caulked filled in later.
@Json5472 жыл бұрын
@@fultonfinewoodworks Thanks
@al522692 жыл бұрын
Great video Thanks for sharing New subscriber here
@fultonfinewoodworks2 жыл бұрын
Thank you and thanks for subscribing, I am currently working on a part 2 of the crown molding video to answer frequently asked questions
@Santos-ek8md2 жыл бұрын
I noticed in this room you only nailed the bottom detail of the crown but never once nailed above also. Why is that?
@fultonfinewoodworks2 жыл бұрын
This was a really old house with plaster walls the nail gun can make the ceiling flake or chip shooting at the angle so I nailed into wall only and the caulk line at the top also acts like a glue.
@TheBismila1Ай бұрын
i WILL HAVE TO PRACTICE A LOT UNTIL A GET IT, THIS IS JAPANESE FOR ME, AND I NEED TO INSTALL THE CROWNMOLDING IN MY HOME WINDOWS AND WALLS