Reverse Dyed Rainbow Tie Dye Sweatshirt

[@ShaunTroy]

Hi Angie. Im 13 and really like your videos, I will try and dye a hoodie the way you have. Thankyou for the clear and easy to follow instructions on all your videos i have watched so far.

[@FunEndeavors]

Hi! You're welcome - I hope you enjoy tie dyeing. Thank you for watching!

[@iknowheis]

It’s really nice. A great amount of black and bright colors!

[@FunEndeavors]

Thank you! 🙂

[@markruffner9143]

Angie, you are amazing. Love your vids and results

[@FunEndeavors]

Thank you so much! 😀

[@KillaManjaroh]

I don't know how to explain how calm and fulfilling your videos are to me. I love your logo design ( it's simply brilliant!) and the unique ideas you have for all of your videos. I feel so inspired and grateful. Thank you, thank you for sharing!

[@FunEndeavors]

You are so kind - thank you! I'm glad you are enjoying the videos.

[@alan_whoneedstiedye]

Turned out great. I haven't tried this yet but have the 2 packages of Ritz color remover.

[@FunEndeavors]

This was my first try at reverse dyeing a sweatshirt myself. I was concerned since it is so thick that the Rit Color Remover might not work very well. Since I didn't untie it in between the color remover and the dye, I was concerned that the middle of the sweatshirt might all be black with none of the color removed. I was very pleasantly surprised during washout. I love it when that happens!

[@kmessmore17]

Tried the color remover on the first shirts I tied up the other day with great success! Don't love the smell but love the results. I untied mine to wash, but was going to re-tie some to try and put color on and hope the color turns out how I want it to.

[@FunEndeavors]

Great! Yes, it is stinky stuff - I think it kind of smells like the old time perm solution from the 80's - ha!

[@maureenmomof3]

Love this one!!

[@FunEndeavors]

Thank you! 😊

[@J.R.Psych74]

This sweatshirt is so gorgeous. I have questions. Before dying, can I use Arm and Hammer washing soda instead of soda ash? Is Jacquard dye any good? And finally, how much would a shirt like this be priced for? ✌😊

[@FunEndeavors]

Thank you! Yes, it is sodium carbonate, but I'm not sure if it has any other ingredients. I haven't ever used it though so I'm not sure if you use the same amount to make your solution. The pH of your soda ash solution should be approximately 10.5. You could get some pH paper and check your solution. I haven't ever used Jacquard dye either. It is the same type of dye that I use, but I haven't used that particular brand.

[@sibelizquierdo5226]

Beautiful! What kind of string do you use?

[@FunEndeavors]

Thank you! I use artificial sinew. Here is a link where I purchase it from Amazon: amzn.to/2EF28Lu

[@coconut2323]

Gorgeous!

[@FunEndeavors]

Thank you! 😊

[@benjaminkiesov3459]

Good morning Angie, I had an idea about a reverse geode t-shirt. A black shirt tied like a geode and then using bleach as like you would a die on a regular geode. And leaving it like that. But I've had problems because the bleach tears at the fabric of the T-shirt. My question is do you know of any kind of products that you could use like bleach like a liquid but not have the same damaging effects of bleach?

[@FunEndeavors]

Hi! I've actually made a shirt like that before, but I didn't video it. It turned out looking really cool with the orange/black combination. I don't use bleach much anymore because it is so damaging to the fabric. I prefer Out White Brite laundry whitener or Rit Color Remover. For this sweatshirt I used Rit Color Remover. They both are very similar, but the Out White Brite works much faster than the Rit Color Remover. Out White Brite doesn't damage the fabric and it will get the shirt much lighter than I've been able to with bleach (it goes to a taupe color). If you aren't familiar with Out White Brite, here is a link: amzn.to/3ix1UWF Also, here is a link to a reverse geode shirt I made using the Out White Brite: kzbin.info/www/bejne/gZKzf5uLp7Nkr5Y

[@benjaminkiesov3459]

@@FunEndeavors thank you again Angie for your reply. Sorry mine has taken a while. I will most definitely check out the Out White Bright Laundry Whitener. Thank you for your time and your videos.

[@benjaminkiesov3459]

@@FunEndeavors I've actually really been trying to experiment with different bleaches, I know that none are up to par as far as fabric being burnt up but have had some good results using a regular strengthened bleach diluted to enable the fabric to be saturated through to the center of the geode then a gel like consistency bleach to coat the outside of the fabric. Let sit for not more than an hour, washed amd dried with my sinew still on. Then untied, rinsed, washed and dried. It's held up pretty nicely, not what I'd like but decent. Idk just sharing my experience. Have a good day.

[@FunEndeavors]

@@benjaminkiesov3459 that's great! I'm really glad that you've found a process that works really well for you. I love how versatile bleach is, but I really don't like how damaging it is. I don't use it too much any more though since I've been using Out White Brite.

[@kariann226]

Please do more long sleeve tutorials! Lol

[@FunEndeavors]

I will - it's long sleeve season again and so I've been working on a few.

[@kariann226]

@@FunEndeavors I found a lot more listed under a diff section on your KZbin, I was missing a lot actually! Thank you!

[@tracyfrogandfuzzy]

This is beautiful!

[@FunEndeavors]

Thank you!

[@Blackdog4818]

Do you add anything to the dye like casoline oil or urea? Your colors seem like they're brighter than most tie-dyes.

[@FunEndeavors]

I do add Urea to my liquid dye, but I don't add calsolene oil. The heat is what helps me to get the bright colors. I made this sweatshirt last August, and I live where it gets really hot during the summer. I put my tie dyes on metal racks down inside of plastic containers and then place the lid on the container and put them outside to process. Inside of the plastic container they will get really hot, but they won't dry out because with the lid on the container they are in kind of a mini sauna. After leaving them in the heat (we have a heat index of over 100 degrees Fahrenheit here today) for 24 hours, the colors will turn out really vibrant.

[@TheWVbear]

Looks Good! 🙂👍 I too was surprised at the color saturation. Have you ever tried Dharma's Dyehouse Color Remover? It looks like it uses the same process.....🤔

[@FunEndeavors]

Thank you! I really kept pouring the dye on trying to make sure it was well saturated. I'm really happy with the way it turned out. No, I haven't used any of Dharma's color remover. From what I've read they are chemically different, but they both remove dye.

[@karinvaleri7130]

So u r using a procion mx dyes?,can this be done with rit all purpose dye if u mix dye,water and salt?

[@FunEndeavors]

I haven't ever used Rit dye so I'm not sure.

[@samanthadalton9588]

I've done 2 rounds of rit color remover and my sweatshirt is still black! Any suggestions? Do you think the brand of black crewneck matters?

[@FunEndeavors]

Color removers just don't work with some items. I think it has something to do with the way the item was originally dyed. It's kind of bizarre. Is your sweatshirt cotton? The color removers work best with cotton items.

[@amyhall3123]

I'm trying to decide what size dye to buy. Approximately how much do you use per item?

[@FunEndeavors]

That's kind of a tough question. It depends on the color and the method you are using (ice or liquid dye). Dharma Trading Company has some great resources available that may help. Here is a link to a group tie dye materials list. One of the paragraphs addresses how much dye to purchase. You can use that guide and scale it to match how many items you would like to dye. I tend to be fairly heavy handed with dye application and so I usually use a little more than they suggest, but that should give you a good starting point. www.dharmatrading.com/techniques/tiedye/tie-dye-materials-what-you-need-for-a-group.html

[@gianaseppanen]

I am loving all of your videos! Thank you for sharing your knowledge! I am wondering how long the dyes are good for once they are mixed?

[@FunEndeavors]

I've had difficulty with black losing it's intensity after a few days. However, most other colors will last at least a week or more if they are kept where it is cool. I know some tie dyers refrigerate them. I don't, but I keep them in a cool room and haven't had any issues. I actually used some dye that was about 3 or more weeks old on a damaged shirt just to experiment and I was amazed how vibrant it was. I was expecting the color to be more muted.

[@gianaseppanen]

@@FunEndeavors Thank you so much!!

[@FunEndeavors]

@@gianaseppanen you're welcome!

[@hespie3579]

I used old dye in the (vain!) hope of producing more muted, pastel colours and ended up with probably one of the most intense shorts I’ve dyed! Going to try the diluted dyes next.

[@aadamernest6038]

this looks so sick! what’s the background song?

[@FunEndeavors]

Thank you! The song is Tundra by Tomas Novoa.

[@bankaibillions]

Love it👍🏼❤️

[@FunEndeavors]

Thank you so much!

[@jhonscj]

hi i have a question, is color remover the same with bleach?

[@FunEndeavors]

No, it's a different chemical. It removes the color, but doesn't damage the fabric the way that bleach does. It is very stinky though (bleach is too) that's why I use the color remover outside.

[@toluwaleyiabayomi3165]

This is soo cool!

[@FunEndeavors]

Thank you so much!

[@brianarevalos]

This one is 😎

[@FunEndeavors]

Thank you!

[@childofthelight9071]

You rock! 🎸

[@FunEndeavors]

Thank you!

[@RD-vz6cc]

It turned out nicely. But you can get better results with starting on white and applying colors on one side and black on the other. You eliminate the unnecessary color remover step And multiple washes.

[@FunEndeavors]

Thank you! You're right you can start from a white shirt and put black dye on the back. I dye shirts that way too, but I've been having fun experimenting with reverse dyeing. The reverse dyeing does give a different effect than just using black dye. It does take a bit more time to do though.