BioHome Ultimate: Unboxing, Science, and Setup

I have waited a long time to finally use Biohome media in my aquariums! In this video I unbox, explain the science, and show you how to properly incorporate this media into your system. I give an honest overview of the costs and benefits of this advanced BioMedia.

[@sqrley]

New subbie today. Really enjoyed your Seachem Paraguard videos. Excellent intelligent information. Clear, consise and straight to the point without all the frilly nonsense cluttering up the message. Looking forward to binging on your channel!

[@EriksWorld14]

Nice! I've been using biohome ultimate for 2 years now (the duration I've been in the hobby essentially). When I first started keeping fish, I was obsessed with PondGuru's advice on youtube about optimizing your filtration needs, and would always advocate for getting the best bio media out there. For me, greatwave engineering's (the US distributor) customer service really solidified my choice to go with biohome, and I now run it on every canister filter I have practically. Biohome is definitely worth the money, and it does provide a habitable surface for anaerobic bacteria to develop, if enough time is given. The chemistry behind how it combats nitrogen is simple but fascinating. Furthermore, it doesn't degrade nearly at the rate that some of the other popular media does, which makes it an effective long term solution. I can't say enough good things about this product, and its awesome you are finally starting to get some! You should do another thorough video describing your experience with biohome after a few months.

[@JosephKarthic]

Does it really reduces nitrates to 0 over time?

[@burlisaquarien7568]

After more than 6 month I don't see any effect

[@nitehawkpearl8304]

@@JosephKarthic Not always at 0 but my nitrates usually is less than 5ppm which is very good for fishes.

[@nitehawkpearl8304]

@@burlisaquarien7568 what kind of tank do you have and how many pounds of biohome media do you have?

[@burlisaquarien7568]

@@nitehawkpearl8304 I have a 54 Liter (about 14 gallons) aquarium and an Eheim Experience 150. The top basket is completly filled with Biohome. But I want to remove all biomedia because I have planted tanks and it seems that too much biomedia can be counterproductive in planted tanks. It seems that not only Nitrite and maybe Nintrate will be reduced in the filter but also other nutrients for plants. I have to use much more fertilizer. Biohome might be great for Malawi tanks or other tanks with just a few or no plants, but not good for planted tanks. I removed all Biohome from 3 tanks without any Nitrite peek, so it doesn't seem that Biohome is necessary for nitrification at all

[@PACK-ge5gu]

I have been doing research im getting back into hobby thanks for video i am going to use biohome media when i set up my filtration system For those here buy from biohome direct A little better price!👍

[@walterotiepka1460]

I use bio home in my fx6 excellent product been using for 4 years and it does work highly recommended

[@wyzemann]

I love that homemade sump. I've been using biohome ultimate in my Fluval G3 for over 2 years now, and I haven't regretted it. I'm also using MarinePure by CerMedia in most of my HOBs throughout my "fish house". Lastly, Seachem Matrix because it is smaller than the previous two for some other applications. Thanks again for a well thought out overview; you are the best.

[@pc-cichlids4077]

Best Aquarium media ever. Using BIohome on my canisters from 4 years now.

[@DeepikaAditya]

What is your load, tank size, water change schedule, nitrate levels between water changes

[@ursanbear]

Wow, it's like watching Ponguru's videos all over again.

[@dannycastaneda1974]

Nice demonstration of capillary action. I think that's the big difference between the biohome and other products.

[@AussieAquatic]

More useful information for our hobby, is that the range of microbes able to live underwater includes "Anammox" bacteria. These are still quite new in our history of understanding the nitrogen cycle. These valuable bacteria, bypass the whole traditional cycle, and convert ammonia directly to nitrogen gas. We would all love these guys working for us!!!

[@AquaticLogic]

Thanks for the comment. Someone just posted an article regarding Anammox bacteria last week on my local aquarium club website, and I found their metabolic abilities scintillating. We have so much to learn in our hobby 👍🏼

[@AussieAquatic]

I find the microbiology of aquariums extremely fascinating and the natural world more broadly. Trying to grow aquatic plants well, really stretches the boundaries of glass box fishkeeping.

[@Moshbearpig]

I don't think you can go wrong with biohome, substrat pro, marine pure, de*nitrate or matrix. I've had significant nitrate reduction with all 5 types, I even set up low flow canisters filled with de*nitrate and my nitrates are low for months on end. I've had luck with all 4 media brands and I usually just buy what I can find at the best price. Good review. Cheers

[@rogeraquarium6872]

I love biohome ultimate and the original biohome plus, I've used both for years. You cannot tell bacteria where to grow, it just grows. Try to give the bacteria lots of options. Moving beds, static , low flow high flow ect...

[@adnansayyed548]

Hey it’s been a while since this video came out .... how’s the media.. can you give us a review?!

[@nunyabizniss4580]

I packed approx. 9lbs of this in the 2 fx6 I have running on a 250 gallon and have never seen water more clear in almost 25 years I have in the hobby.

[@DieselMike]

Nice video pal. I am not going to sit here and read 145 comments. But the few haters I have read, I want to say to you: Good for you standing your ground and supporting your beliefs. Especially this tool, Jamie MacDonald. Any loser wasting his time arguing back and forth and trying to support his claims with his "professional" background is just good, pure entertainment for me. I personally make zero claims as I have no expertise. I watched PondGuru. He seems to know what he's talking about, so I went ahead and ordered a batch. The UK mate seems to be a quite industrious chap with a successful business model. Good for him. And good for you, Aquatic Logic. What's Jamie done?

[@TONY_FEZ]

I am sure this stuff is great but its also insanely expensive. I use Lava rock with is around $1 per kilo and my discus tanks are perfect.

[@lostmangos]

That is interesting to know, I have never had an external filter before and would have got biohome but apparently need 4kg of it for my 200L tank. 😬

[@rajadey4919]

In your canister filter? Your impeller can get damaged.

[@shanes.5392]

I like the video and you always give good explanations of how stuff works. Much appreciated. I bought some too. Honestly not too bad cost 75 bucks for 5 lbs on eBay.

[@AJBAdventures]

cracking video mate, richard @pondguru will be proud with how well you've demonstrated the simple process of how biohome works 👍 cheers Aaron

[@FireGate_13]

DID they WORK ??? did you see any reduction with the nitrates ???

[@ghostwriterinme5050]

Excellent channel

[@canecorsomolosser3294]

Definitely going to buy this filter media👍

[@magzire]

So how are your nitrates?

[@pellep4035]

That overhead sump is a great idea!! Im stealing that idea, haha

[@Mr.ReanuKeeves]

May I ask a question, I noticed you didn't have a bubbler. Is it necessary or not really?

[@tbj3677]

Great video. Have a qns. If my biohome ult isn't sucking up water through the capillary method, is it a sign that the media is too old? I had it for 3 years in my fx5

[@AquaticLogic]

The reason why its no longer showing capillary action, is because the pores are filled with (hopefully) bacteria and their biofilms, and therefore this would be expected.

[@a.ced.2052]

I guess what I want to know is that if it would be a good idea OR recommend to put a fine filter mat under your media???

[@lovinmzre]

Hthank you sir for all the knowledgeable details!

It was some time ago, but he told me that he couldn't ship to Canada. I bought Marine Pure instead. I hope that stuff works for you.

[@dmichaelsfishden]

Very interesting!! Not familiar until now.

[@bigs9030]

got a question, after 2 years to establish a solid study whats the verdict/results of nitrate levels with biohome?

[@suddhashilmukhuty8836]

Brilliant stuff

[@HalfManHalfCichlid]

I have been hesitant to try this media. Several independent scientific evaluations I have read have shown that this media clogs rather quickly and the water going through your filter essentially by-passes the media as a result, negating it's effectiveness in providing a large surface area for biological activity. What say you about these findings? I have remained with Poret foam since placing panels of this material in my sump forces the water through the foam (cannot bypass), and when it clogs it is easy to clean.

[@AquaticLogic]

I would love to read the independent scientific evaluations you have found! Its cool that someone has actually taken the time and money to evaluate it properly.

[@HalfManHalfCichlid]

Here is one by Dr. Kevin Novak. Try to grind through the science stuff, and wait for the conclusions. Putting aside the science the experienced aquarist knows that water flow will by-pass clogged media and that sintered media will clog.

[@HalfManHalfCichlid]

kzbin.info/www/bejne/lYK3oGxpiNOsjJI

[@AquaticLogic]

Thanks man I will check this out.

[@wyzemann]

HalfMan HalfCichlid Thank You for the link. I listened to the entire presentation, but my impression is that like anything we buy and place in our tanks; ceramic & sintered glass media should be recharged or altogether replaced to prolong their usage. Much like all mechanical & chemical media; eventually, even sponges and other biomedia need a thorough cleaning and/or repurchased. This hobby is always about selecting that which is best for YOUR particular needs....as with anything you purchase.

[@jc49fishniner4lif7]

awesome job and great ideas👍👍

[@a.ced.2052]

Do you think that as the glass from the Biohome breaks down the particles will get into impeller and mess it up??? Rookie question, please forgive my ignorance and curiosity🤔😎

[@varanidguy]

Have you noticed any impact on your nitrates?

[@redking1831]

what a great review. I am getting this stuff because of this vid.

[@captainaxlerod1297]

Where did you get it from

[@johnnimmo4114]

Been running this alongside identical filter filled with siporax and there are zero differences in this versus siporax regarding water parameters for last two years

[@danstanford89]

The amount u need to establish these bacteria is super high pond guru suggests 2 kilos for a medium stocked tank of only 100-150 litres

[@MasterAquatics]

Are you going to make more videos?

[@AquaticLogic]

Yeah sometime soon here. Just finishing my basement (carpet went in a few days ago) and will be moving my tanks back home (from my parents house) soon. Its hard to make videos when my tanks are not at my house! Thanks for the question!

[@neils4501]

Great stuff man, best media out there. I’ve been using this stuff for about a year on a fluval HoB and it’s just awesome. The only thing is those bacteria balls do not break down, I still have some stuff floating around.

[@madusonkeeper]

Bio balls for freshwater only

[@DEXTER-TV-series]

So what do you think about this "ultimate" media now, 4 years later ?

[@eliavedri7876]

It's been a while since I'm interested in this media ... The cheapest I've found is like 14$ per 1 pound is that a good price? , how many pounds of it was in the packaging? Thanks

[@jamesrogers4674]

Greatwave engineering has it for $18.32 per kilo. That's less than $9.00 per lb. Shipping isn't bad at all in the states either. I ordered 3 kilos and after shipping was $65.00. Got a little bit over. Was 6lb 15oz when I weighed it with refrigerante scales. Not bad at all if you ask me.

[@quinnsouthwell1311]

So... How is the tank doing with the new media?

[@AquaticLogic]

Pretty awesome so far. Tanks are coming back home from my parents house next week because my basement development is finally done. Hoping to post update video next week.

[@quinnsouthwell1311]

Aquatic Logic awesome. Another thing. Are tropheus skidish? Like if you walk by take and what not... do they spook easy?

[@VideoGamingPlanet]

Very helpful!!! But how do you sleep with that noisy water dripping in the aquarium?

[@bxkid7]

lower your out put hose 3 inches below water level.

[@VideoGamingPlanet]

@@bxkid7 Yeah I could figure that out...Just wondering whether he applies this suggested method or would face noisy ambience.

[@raymondolivares1093]

I have the biohome ultimate media when i was keeping African cichlids. But switching to saltwater keeping and was wondering can i use the same biohome ultimate in a saltwater application instead buying the marine version biohome.

[@jayinspain]

Yes

[@josephkool8411]

good job young man

[@AQUAGUYUK]

Hmm issue i have is you can blow through it meaning gas can enter and leave also if oxygen cant get in the middle how does nitrogen get out ,,,having said that it is a good media for canisters ,,,,,pumice stone is just as good and half the price ,,seachem use it as matrix

[@hkja99]

Great video! Thank you

[@b1olsola]

Best media ever

[@WCxColosus]

How much would I need for a 29 gallon aquarium

[@willd5377]

WCxColossus I just got as much as I could fit in my filter

[@pedrofigueira1967]

With biohome ultimate the water get any type of coloration?

[@dcretu146]

Not if you rinse it well.

[@joec2174]

I like my capillary action with garlic and oil !!

[@KoushikPaulliveandletlive]

Brick chips has the same ( a bit slow) capillary effect .

[@thomashaapalainen4108]

And lots of unknown dissolved solids in unknown quantities. efflorescence is the white salts you see rise to the surface of bricks. It's best to avoid putting unknown water soluble solids in a tank.

[@Denim_____Dreams]

Thank you🙂

[@madusonkeeper]

Bio balls are for freshwater have to buy separate ones for saltwater. And as a general rule you should only replace part of your filter media at a time so you dont wipe out all your beneficial bacteria at once..

[@jeffmeisterr]

How long do you need to replace this media?

[@matthewholt145]

Never

[@shivampatel6190]

Would this work with a reef tank?

[@wyzemann]

Most definitely, Biohome has a specific type for reef/saltwater: greatwaveeng.com/shop/media/biohome-ultimate-marine-media/

[@shivampatel6190]

ok thanks!

[@proshjice]

I'm putting my Biohome Ultimate in my FX6.. Alright moneybags no needa flex.

[@suktuckng]

hello, u just clean it with tap water? any concern if the tap water contain chlorine?

[@giveitsomepain]

Only for the initial setup, once mature it should only be cleaned with dechlorinated water or tank water or you will kill the bacteria thats there. To be honest i would have washed it in tank water off the bat. He could be using water from a well though so that would be OK.

[@suktuckng]

@@giveitsomepain thanks! What about the used sponge filter. U clean it using aquarium water or tap water?

[@giveitsomepain]

@@suktuckng in tank water if the sponge is still usable there will be some bacteria left in it once rinsed.

[@darrenzilisch2214]

so what does the nitrate get converted too?

[@Sam.osborne__]

Nitrogen gas

[@eramirez1014]

How often we have to replace biohome media? Please help

[@lostmangos]

8-10 years he says on his videos

[@vincentdaly6715]

You should watch the Pondguru’s video from his pimp my filter series. Where he upgrades the FX6 giving more mechanical filtration in the ring of sponges freeing up the top tray for polishing pad and even more Biohome ultimate. This video also explains the path the water takes in this particular FX6. I see by the comments a lot of people put the mechanical foam in the bottom tray. kzbin.info/www/bejne/r6OyopmOfJehgpI

[@condorX2]

It weird, but the way I see things as I get older. You're a warden / janitor who need to clean after your inmates for life with no fault of their own.

[@gilx.9886]

Can you just wash it in tap water? Aren’t the chlorine and chemicals harmful to the beneficial bacteria?

[@AquaticLogic]

Parrott Aquatics It’s brand new...

[@gilx.9886]

Don’t mean to be annoying or any thing thanks

[@chefpinot45]

I agree Parrott. I wouldn't rinse mine with chlorinated tap water either.

[@magzire]

It would have been better to soak it in dirty filter water for a couple of hours so it cycled faster, but it was new media so it doesn't matter once he has a decent declor.

[@Hallofgondor]

What is your opinion on sponge filters?

[@MasterAquatics]

Jamie Hall sponge filters are great. Especially for baby and small fish.

[@DVCkoto]

Link please to buy for Canadian 5 kg for $125 CAN?

[@AquaticLogic]

www.AngelFins.ca

[@GSP-76]

Biohome is great stuff but hella expensive!

[@jamesrogers4674]

$18.32 per kilo at Greatwave engineering. That's $8.33 per lb. Shipping in the states isn't bad either. I ordered 3 kilos and shipping was $10.

[@GSP-76]

@@jamesrogers4674 That's much cheaper than what I paid...I paid $26 USD for 2lbs.

":A tonne of bacteria"? Just how many filters do you own?

[@megarafjogos]

I don't think that this is the way to go. This stuff is seriously expensive, and it can take months before it starts to work, IF it starts to work. This is a solution to a problem that has never been a problem. Stuff your filter with cheap lava rock -> get lots of nitrate from aerobic cycle -> Plants consume nitrate -> end of problem.

[@mik310s]

I use it in my bed to remove the pee :D

[@401kdub2]

My girl is a super squirter I think I’ll invest in some 😌

[@krs306]

Bro put it all in a bucket of your TANKWATER and pick it back out washed, this is best. .

[@lostmangos]

Apparently I would need 4kg of it, which would cost £60+ it is quite expensive

[@danstanford89]

I use a mix of bio home and seachem matrix half and half works great for me, dont see a need to ever change it ive had cheap Chinese media last me 8+ years

[@lostmangos]

@@danstanford89 Which filter do you have Dan? I have never had an external before

[@danstanford89]

@@lostmangos I've got a fluval 307 for my 55 gallon, i find its not quite enough for my over stocked malawi tank, so i run an internal along side, if i was to do it again i would get a 407 or fx4, but a bigger tank over 75 gallon id recommend an fx6 or the highest flow sun sun filter from all pond solutions

[@lostmangos]

@@danstanford89 The thing that is confusing me is I have a small pond with 4 fancy goldys in it but want to bring them inside as I never get to see them. I was going to get the fluval 307 (£130) for a 200L tank for them. The pondguru video suggests when keeping messy fish like goldfish that 2kg biohome per 100L will be needed (4kg =£60+). The fluval 307 only has 3 trays I gather and the bottom 1 should be used for sponges so that just leaves 2 trays which each hold 1kg biohome. Is he saying I would need 2x 307s?!

[@danstanford89]

@@lostmangos for 4 gold fish 2kg would be plenty i have 10 6" fish in my 200l, just 1 307 would be plenty if u could stretch to a 407 even better. He is talking about the full cycle which removes or majorly lowers the nitrates in the tank, i do 40-50% water changes a week so dont really have to worry

[@pp4009]

P dah rame

[@erniedoesthings9167]

Seachem matrix has 2x the surface area of biohome, also has a bigger anoxic (anaerobic) area than biohome, also has better flow, and is wayyyyyyyyyyyyy cheaper

[@AquariumAdventures]

What makes you think that (2x surface area)?

[@erniedoesthings9167]

Aquarium Adventures I'm a biochemist and have a 3 year degree in geology, the pumice from matrix is Scotia pumice and has 312,000 ft2/ft3 and matrix is 162,000ft2/ft3

[@ThePaulpope]

I don’t quite understand why people don’t get how all these “new” media’s like biohome and marine pure etc are actually WORSE then Matrix... you put Matrix in a low flow zone and you will get exactly the same ( actually greater) effect on nitrates .... biohome ultimate is in fact NOT inert in a low ph freshwater tank either. I can kill nitrate easily... use a reactor, a deep bed, a planted refugium whatever... but what’s LESS work is just doing a water change. Turn a tap to drain... turn on the pump to refill ...

[@rathman4601]

ErnieDoesThings I’m doing research on biohome before I purchase. I’m hearing all the pros about it but you need 1-2 kg. per 26 gallons according to the manufacturer’s recommendations. That’s 2-4 lbs per 26 gallons. That’s a lot you have to fit in a filter to be effective. How would you even fit almost a pound in a 5 gal filter? I’m leaning towards Matrix. 5 gallons - .84 lbs 10 gallons - 1.69 lbs 20 gallons - 3.39 lbs 30 gallons - 5.08 lbs 40 gallons - 6.78 lbs 50 gallons - 8.47 lbs 60 gallons - 10.17 lbs 75 gallons - 12.71 lbs 90 gallons - 15.26 lbs 100 gallons - 16.95 lbs 120 gallons - 20.35 lb

[@kjeldlarsen912]

Whatever the sheeps will pay whatever they will pay

[@joekowalski182]

Lava rocks work best crystal clear water and cheap.also you don't have to unbox lava rocks

[@AquaticLogic]

You have to unBAG lava rocks and that it not as fun ;-)

[@JohnT2088]

When ya say better. Its not like it makes a huge difference night and day. Just marketing lol. I used to work for one of the largest company that makes those medias. Of course their is some engineering to it with more pores for beneficial bacteria but if its expensive its not worth it at all. Regular media with weekly water change is enough.

[@muhammadalisiddiqui2690]

you reversed the mechanical filtration it should be like following: 1st coarse media 2nd medium and lastly fine media

[@AquaticLogic]

The type, sequence, and placement of the mechanical media is all correct. Go review the flow in an FX6.

[@muhammadalisiddiqui2690]

No need to get offended, please watch this kzbin.info/www/bejne/gmapnIaKjtB4d6c video (16:01 How to set up a canister filter for full cycle filtration) it is helpful when setting up canister filter. It was supposed to be a friendly advice for a fellow hobbyist.

[@AquaticLogic]

I was not offended and the video you are referencing is not a Fluval FX6, and thus you keep trying to reinforce your error. Please watch a video (my video for example) on how the water flows in an FX6. I will give you a hint! Not all filters flow the same way. I appreciate friendly advice, and now please take mine ;-)

[@erniedoesthings9167]

Lol a moss ball would remove more nitrate than this. I'm a biochemist so I'm know my shit. This media has a 1-25 Anoxic to noxic ratio which means that if you have 40ppm of nitrate with no more input and you have biohome (cycled) it will take 48-52 hours to to lower by 3ppm. Which is good if you have no fish... fish(on average) will create triple that in the same time. People get confused because everyone thinks that anaerobic means no oxygen but it doesent, Anoxic means no oxygen, anaerobic means no oxidizers which means nitrate, nitrite, phosphates and pretty much 70% of organic chemicals found in water... biohome ultimate Is good but not worth it for the money, if you had a substrate of 4 inches(10cm) of you will get quadruple that of biohome which means th a if you have pa 4 inch fine substrate like sand you will get more nitrate removal then nitrate added and there for you don't need water changes(but it I still recomended)

[@AquaticLogic]

Where are you deriving all your data? Anoxic to (sic) noxic ratios? Fish creating "triple that" (3ppm)? Quadruple the nitrate removal?

[@erniedoesthings9167]

Aquatic Logic I'm a biochemist, I have some of this and I checked so 1 in every 25 millimeters squared is Anoxic so I did some tests with my equipment (from my work) and did these tests but I'm not saying biohome is bad its better than normal media

[@AquaticLogic]

Moving past your appeal to authority fallacy (Trust me I'm a biochemist), your taking for granted that your tests were accurate and your methodology was correct. Citing specific numbers without proper evidence is a huge red flag for me.

[@erniedoesthings9167]

Aquatic Logic but I used proper protocol at my work for it, this is literally my job

[@ioannissais6973]

Looks like sausages! Lol

[@theone5404]

You didn't have to go through all that. If you would have used Seachem Stability for 7days, it would have cycled the new biohome.

[@magzire]

Or soak them in dirty filter water

[@GSP-76]

You will NOT achieve anaerobic colonization in a canister filter... even if you fill it up entirely with biohome ultimate, it won't happen...you need to put the media in a very low flow area...a sump is good for this as you need the flow rate of the water to be 75gph or less...if your using a canister, buy lava rock or pumice and save your money.

[@AquaticLogic]

Your comment is asinine especially prescribing a flow rate of 75ghp. What if I do 75 gph through a drinking straw? Will that suffice Mr. Microbiologist?

[@GSP-76]

@@AquaticLogic Listen genius, you obviously don't know anything about anaerobic bacteria...show me one canister setup that has it growing inside then we can talk...having an anoxic zone is the EXACT opposite of what aerobic bacteria needs to live which means anoxygen rich enviornment. So how do you propose that bacteria that can't survive in an oxygen rich enviornment somehow grows inside a canister that's pushing oxygen rich water through it at almost 1000gph?? I won't hold my breath for an answer.

[@AquaticLogic]

@@GSP-76 Your lost so I will help you find yourself again. The spatial organization of ammonia-oxidizing and nitrite-oxidizing bacteria is predicated on -=BIOFILMS=-. They form these to better control their environments. This BIOFILM can and does (given sufficient time) cause anaerobic conditions in the middle of the media. Then anaerobic bacteria set up shop . Its fundamental microbiology, which I learned in second year biology.

[@GSP-76]

@@AquaticLogic you didn't answer my question...it wasn't hard. I'll ask again - How do you create an anoxic zone in a highly oxygen rich water flow enviornment? I'll give you the answer - you don't. Your filter isn't reducing nitrates whatsoever. Pondguru's idea of achieving this in canisters is by simply loading the canisters up to the brim with Biohome Ultimate in the hopes that 6 months later the very innermost sticks create a tiny amount of anaerobic bacteria because they don't get hit with as much water as the media on the outside...it's a joke and pretty stupid ideology that simply doesn't work....good luck peddling the nonsense. You'll still be doing massive water changes until you get a sump that has separate sections that has very little flow. Even that is minimal after colonization unless your packing it with 20lbs of media which is buried under a substrate to further reduce flow. There's only about 1000 videos all over KZbin explaining this but I'm sure you and your biology class knowledge has it all figured out.

[@AquaticLogic]

@@GSP-76 Ok I will lay this out for you because your really ignorant, and have never taken a basic microbiology class before. 1. Obligate/facultative aerobic bacteria colonize media. 2. In colonization they form biofilms like most bacteria on Earth 3. The biofilms clog the pores of the media, and create anerobic zones in the middle of the media through A) lack of water flow and B) metabolization of existing oxygen. 4. Facultative Anerobic bacteria move into the anaerobic niche... This happens in ponds, rivers, lakes, streams, literally all natural aquatic ecosystems. This is basic biology/ecology.

[@marcusbraun7606]

Biohome is good, but not better than Biomax.

[@AquaticLogic]

Why?

[@marcusbraun7606]

Aquatic Logic it is the same. No need to change from one to the other.

[@AquaticLogic]

Biomax has no anaerobic zones. Thus they are not the same (as per my video).

[@shanehewlett1404]

I have both. Biohome outperforms biomax and is a much better media.

[@Quepiid]

That guy is a scammer. That shit disintegrates over time in the filter. He don’t even have fish tanks he just makes money off of the hobby. Ask Joey about him.

[@AquaticLogic]

+quepiid The dude ran a fish store for many years, and has a massive pond in his backyard.

[@Quepiid]

Aquatic Logic right. A STORE. He never had tanks.

[@pc-cichlids4077]

scammer?? Using Richard Biohome 3 years know not one ever broke. Joey didnt buy Biohome on Pondguru . This people are really dumb.

[@pc-cichlids4077]

You dumb

[@pc-cichlids4077]

Thats why the fish from your friend Joey are always dyng?? Cause he is a expert??lolololol

[@Hartwig870]

Man, canister filters are such garbage.

[@AquaticLogic]

Yeah thats why millions are sold each year, and people keep buying them because they are such garbage.