USB Loader GX Issues FIXED! (No partition found & USB device not initialized)

[@toxincustomoutdoors]

I was searching for HOURS because my drives wouldn't work. I probably put in 9 hours of working, searching, formatting, downloading fixes, etc. all I had to do was use 2 drives and it FINALLY worked. Thank you a ton

[@funkyscott47]

glad i could help :)

[@jeremygreen2883]

Does this work for WiiWare titles, I can't seem to get it to recognize them. Also, would it be possible to partition a portable drive, so you could also store GameCube iso files on it too?

[@njshieet]

How did you do that? I can't :(

[@GermanSharkLP]

Thanks so much! I had issues with the sd and the usb at the same time but this video really helped me out😄 And for ya'll if you only see one game in usblgx try enabeling "multiple partitions" in the hard drive settings. That should fix it😉

[@funkyscott47]

I'm glad I could help and thank you so much for the tip 🙏

[@GermanSharkLP]

@@funkyscott47 👍🏼

[@akumapup]

Thank you! This right here helped. No other tutorial told you that you had then reformat the flash drive a second time. That was my issue

[@ninjago-zv1kr]

Thank you so much,I've been trying to mod my wii with no luck,but recently got it with your videos and this video helped me a lot when trying to play the games I downloaded,thank you very much!!!

[@roythereject5418]

Only took 4 days a million tries 30 of YOUR videos countless hours blood sweat and tears but i have you to thank youve earned a sub

[@michaelmarquez1285]

you made it happen for me brother i am now enjoing my wii because of you

[@funkyscott47]

Much love ❤️

[@fahadabbas2100]

​@@funkyscott47hey can you please help me on a problem on my Wii it's that whenever I load a game it takes me back to homebrew home screen please help

[@HACPOA1602]

​@@funkyscott47 I love how you post solution videos on how to fix glitches, many KZbinrs probably don't do that.

[@lucarosas6927]

MAN THANKS FOR YOUR GUIDE!!!seriously i was going crazy with others, u just saved my day!!

[@hosepink1124]

Just wanted to add: if you don't see any games, make sure that in hard drive settings you set "sd mode" to false and format game/install partition to be the new WPFS

[@unknownguest]

Thank you so much! Such a simple workaround. It worked.

[@Catguy0078]

i dont see a hard drive setting

[@joshwatts5869]

Dude you have no idea how helpful this was!!! Me and my girl had that error screen for months on end tysm!! You've got a new sub

[@samfrank910]

I doubt anyone will see this but I had this issue. I simply switched to usb port 1. Clicked default settings. Then changed it to usb port 1. And it worked 🤷‍♀️

[@corentin_Z]

I had this issue and I solved it thanks to a little thing you said « homebrew cant play apps and games on the same drive ». I had an « app » folder on my drive with the games. It was empty but that was the cause of the issue. Once I deleted it, and reset the parameters in loaderGX it worked just fine. You didn’t solved it but you did it anyway. Thank you.

[@der_d00de86]

Sir, your comment solved this problem for me. Thank you!

[@corentin_Z]

@@der_d00de86 glad my own problem could solve yours :)

[@dallinferguson994]

I wish this solved the problem for me...

[@The2010DC]

Im testing this now by I believe you may be right for an HDD/SDD. My Sd card has both and works

[@XxMugglesAndMagicxX]

BRO, THANK YOU SO MUCH. IVE BEEN SITTING AROUND TRYING TO FIGURE THIS OUT FOR 2 HOURS, YOU CAME IN CLUTCH, I AM USING 2 USB'S, WITHOUT A SD CARD. I AM SUBSCRIBING

[@DesiredRooster]

Thanks dude! I was curious as to what was going on to my usb drive until this video showed, appreciate it.

[@swordman128]

Thank you so much for this. I was worried that I was going to have to buy another usb drive

[@bindergrosgamingsale]

I just spent 3 hours trying to make my Wii recognize my Flashdrive, but to no avail. Your video saved me, you have no idea. I can finally go sleep. Thank you

[@aztrofitz]

Dude I was struggling for so long cause of this, thank you so much

[@KronoriumKid]

Thank you this worked for me after spending a whole day to figure it out. I thought id have to buy a new usb

[@ApocalypseKurtz]

THANK YOU!!! I was looking for hours and nothing worked until I found this video.

[@jakelol5119]

This worked on the vWii on Wii U too! Thanks!. Using an SD Card via a USB Reader making the Wii U (vWii) think it's a USB inserted which now works great after making the drive a WBFS partition

[@isaacchavarria4026]

Have u tested the last priiloader version to apply patches to the wii menu on wii u?

[@DasherDaGreat]

@@isaacchavarria4026 how?

[@zenithxzx]

Bro i love you i have been figuring this out for a good 6 hours didnt know i could format the usb to wbfs!

[@Revyrun]

I had a ntfs 1tb drive and had to repartition it into two parts (100 gb for wbfs and 900 for the rest in case I wanna use it for something else) . this worked like a charm, thanks man

[@funkyscott47]

woah, I didn't know you could split it like that! Very cool :)

[@spitefullymy]

Hi, what’s the max hard drive size I can use for this wbfs format? I got this same issue on vWii and this video solved it for a 128gb usb stick, but I want to upgrade to a hard drive. Is 2TB too big?

[@Revyrun]

@@spitefullymy try partitioning a part of the drive to something like 128 gb to NTFS and then formatting it to wbfs with Wii backup manager. Usually 2 TB drives use GPT format (instead of MBR) which some platforms don't support.

[@spitefullymy]

@@Revyrun ohhh thanks for the tip

[@spitefullymy]

@@Revyrun so what’s the biggest size drive that can be MBR?

[@MayhexxGT]

Thanks so much!! Every tutorial I've found says to use FAT32. Turns out the fix was just doing it the classic way. USB Loader works perfect now!

[@funkyscott47]

No problem I'm glad i could help 😁

[@giovanniaraujo3097]

Faz 5 anos que comprei o meu Wii eu tinha tentado de tudo pra fazer os jogos rodar no HD vi vários vídeos e desisti, só conseguir rodar o GameCube pelo Nintendont no HD, mas pelo USB Loader GX não funcionava nem jogos de Wii e nem de GameCube, mas hoje vendo o seu vídeo conseguir fazer rodar os jogos de Wii, muito Obrigado

[@SM-du1zv]

There is a way to fix it, once you're in USB loader GX you can just go into the settings and click hard drive settings and make sure to go to the very top where it says (game/install partition) and make sure it says what it is(you may need to click it) then head back go to tile sources at the top where it looks like a file thing and press Wii games and all of them should pop up

[@21tavish23]

Thank you ❤

[@itsrafagam7216]

Thank you so much!!! That fixed it for me

[@FleshyMeatGames]

when i try to change anything from hard drive settings it will freeze, any idea?

[@vidak.antonio]

@@FleshyMeatGamesfix?

[@somegoofykidontheinternett]

OH MY GOD THANK YOU, I HAVE BEEN TRYING TO FIGURE THIS OUT FOR 2 WEEKS

[@elmaspapuu]

yo, how do you use the Usb loader if the usb only has the games?

[@universalpiano_]

THANK YOU!!!!!!!!!!! I tried to mod my wii for so long with one USB stick and tried everything, when the solution was this simple, thanks so much :DDDDDDDDD

[@smorified]

I realised my usb stick was 3.0 so instead of buying a new one I used a sd card reader and another sd card, IT ACTUALLY WORKED LOL

[@funkyscott47]

you're a genius :D

[@robertjames6697]

I wish I had read this comment 4 hours ago 😭

[@arianaqueen4evaxoxo390]

wait u can’t use usb 3.0?😭

[@xxspiritgunxx632]

@@arianaqueen4evaxoxo390 if u still wondering u can have any kind it will just work as a 2.0

[@JamesWBerkley]

It honestly takes me back to the home screen

[@jose-naves]

Thank you so much man ! My son is happy again!

[@funkyscott47]

so glad to hear that! :)

[@Ninj4Squirtle]

i followed this and the cIOS dx installer with the settings inthe pinned comments, im using a 64gig sandisk SD card, ive transfered several Europe version games (console is E) but when i load USB GX installer, i still get the "no wbfs or fat/ntfs/ext partition found" message, ive repeated this step several times and nothing.

[@RealDealah]

Try to see if your USB/SD Is corrupted by putting it inside of your computer, if it isn't try to put it in the bottom slot of your wii, and if it still doesn't work, try to get another SD/USB.

[@mydv9305txdied]

Thanks. Couldn't get it to work no matter what using fat32 but this worked.

[@mapping_bl3740]

Thanks a lot man you saved me. Works with no issue

[@Juhgul]

My games wont start everything is good and show up but when i click start it just takes me back to homebrew channel

[@nukeavailable2358]

Same

[@limitlessboy6423]

U might use the wrong game id

[@17JordanHM17]

​@@limitlessboy6423i have same problem but it works on a 16gb flash drive but same file on a 2tb hard drive wont load

[@MrGame9NL]

Check if u installed cios

[@fahadabbas2100]

Same man how did you solve it I also did everything and whenever I load a game it takes me back it's just so frustrating

[@heidipark883]

You're videos are brilliant helped me massively

[@funkyscott47]

Glad i can help!

[@Chicken__Noodle]

Dude your a freeking legend I was about to send my wii flying out the window. As my games loaded then kept going back to the dam menu so started again with this method.

[@booom2314]

My Wii controller input freezes when I try to open a game and I have to restart the Wii to reconnect it can someone help my with this problem? Also the disc slot lights up wen it freezes.

[@riskydolchey1951]

Okay so guys I was breaking my head also for a sec but the thing is that if you used a sd card you will need a additional usb stick to put you’re games on and usb gx loader together with the wbfs folder I have the wad also on the usb stick and the apps folder with some yawmm and usb loader gx and on the root the wbfs folder with the games put them there with the Wii backup manager when I converted them from iso to wbfs if you don’t know how to convert to iso from rvz use dolphin there is a video out there hope this helped a bit as I was stressing all Sunday to get it right lol

[@xnonstup]

thank you so much man, you are the GOAT

[@Jamie_16]

I love you bro, you always help me out and i appreciate it. Keep it up! ❤

[@funkyscott47]

Thank you

[@RizkiAnjani]

Thank you, now I can play all of my games!

[@eimanfikri8420]

Thanks bro, this really helped me, much appreciate it

[@SpinyHead5]

Muchas gracias!! Me funcionó formateando con Wii Backup Manager. Like y sub

[@BurrtoDaApe]

So for example if i use 1 USB Drive and 1 SD Card on which port do i put the usb drive? The SD Card is already obvious

[@animosity3771]

0:34 I got this error and got super confused until I saw this video and turned Wii Games on and it fixed. Thanks. Btw the reason I got that error is because I use an SD card and accidentally went into HDD mode. Switching to SD mode turned off the Wii Games setting for some reason and turned on Nand Channels. Weird.

[@XtremeTeamLeader]

DUDE THANK YOU SO MUCH IT STILL WORKS

[@Jamie_16]

Yayyyy my sandisk 128gb usb 3.0 works now!!

[@skchee962]

hi. i am using a 64gb kingston flash thumb drive to store the games. The flash drive is formatted as FAT32 where all wii format files are transferred using Wii Backup Manager. My problem is GX loader can load the games but when I tried lanching each of the games, it went to a black screen and these games were not running. Any ideas for such error? Thanks in advance.

[@thenameicantfind]

Did you manage to solve your issue?

[@Lucamaz04]

Your files might be too large

[@thedecpder]

I have an HD which is already WBFS but is not being recognized by the USB Loader nor Windows, should i assume it's dead? It still displays the led as on however.

[@TheBubbyBubs]

You can try to go into Create and Format hard disk partitions in windows to find the usb drive

[@speedrunner1763]

So I’m no longer getting the usb not initialized error but the games are just not showing up even though I have wii games selected to show up. Do you know what I could be doing wrong. And the usb device is lighting up signifying it’s connected.

[@funkyscott47]

You could try the other USB port and also Check that all your games are wbfs format

[@speedrunner1763]

@@funkyscott47 don't worry I was able to get the games to work by using wiiflow and putting the games on my sd card

[@funkyscott47]

glad to hear you found a way :)

[@robert_martino]

Hey dude when i scroll through games with plus and minus the game boxes kind of glitch is there any reason this might be?/ a way to fix it

[@BaconWolf088]

The games are on my USB. I followed all of your steps and got to the wii menu inside USB Loader GX, but none of my games pop up. I made sure the wii games box was check off and it was. I even unchecked it and checked it again and the games still did not pop up. It says "Games: 0" at the bottom. Do you know how to resolve this issue?

[@bridgettemilligan2257]

I had the same issue, after messing around I was able to fix it by going into Usbloader gx settings, then hard drive settings, and switching SD card mode to ON. not sure why this fixed it, but give it a shot if ur still having issues!

[@BaconWolf088]

@@bridgettemilligan2257 will this work without an SD card? I bought a Wii off eBay and it came with boot mii and homebrew already installed but no SD card came with it. I don’t have an SD card to use at the moment so I just want to confirm if this works

[@madjuub9062]

Thank you so much! I thought it was my usb device the problem

[@derblondehans3588]

Thx for solving my Problem.

[@symzo]

Im having a weird problem where my pointer works like normal but when I try to play Wii sports the sensor doesnt pick up the remote properly

[@Antojao]

i need help mine stays white and just shows up the outlines of the gui nothing load up and no errors idkk i need help

[@donathomas590]

I have the same issue 😢 so I changed the port and now it says usb not initialized 😢

[@tazrichie3650]

me too

[@donathomas590]

I know it might be a bit late but I found the solution (atleast it worked for me). The usb i got was wrong; it only works with a 2.0 not a 3.0 usb.

[@TheRealBoloci]

A question, do you also have to put your GameCube games in the WBFS usb drive/sd card?

[@funkyscott47]

no, you can find out how to set them up in this video kzbin.info/www/bejne/eKjTd2aXmr99grM

[@ruffledwings]

I'm having another issue, two specific game on UBS Loader GX will straight up not appear, those being Mario Kart Wii and Wii Party. They worked before, are the correct versions, and i have done what was needed with d2x. I tried removing and readding them but they won't show up and I don't know what to do

[@danielgrace7408]

how can I get it to read from Sd card for downloaded codes and other stuff? only saying usb8 in custom paths. plus it will not save it to the path when I reset it.

[@funkyscott47]

What do you mean downloaded codes?

[@AsianBoiWillie]

this video saved my life. thank you

[@peachlai0222]

Works like a charm! Thank you so much!

[@ra.9859]

It worked thanks a bunch!

[@HughtheManatee]

THANK YOU! Great tutorial

[@overkast6841]

Doing this on a Wii U. I have USB loader on the SD card and it loads. But whne I click wii games I get the error, USB device not initialized, switching to channel list mode. Is that because I may need to do the DX cios thing? This is working on the Wii, I'm trying to switch over to the U

[@AhmadMohammad-f4q]

Guys i have a problem when launching a game from usb loader gx it turns me to homebrew challenge what should i do??

[@wakefulcvt23]

me too bro, idk where too look for what to do

[@slowwpo8995]

Found a fix?

[@nouk5006]

What about the vWii? I’m having the same issue, but I can’t use a wfds formatted usb on the WiiU and now I’m stuck EDIT: nvm I fixed the issue. You have to use Ustealth to hide the usb from the WiiU

[@Playamane22]

How can you even call this a fix? I've been following your tutorials the last 12 hours straight and they've led me to here which is frustrating because this video completely contradicts the other videos of yours I've watched and it has made this whole experience SO confusing I want to pull my hair out. What's the point of modding a wii if you can't play gamecube games? From my understanding, gamecube games can only be played in iso format and if it can't read iso than wouldn't that mean this only works with wii games? this CANT be the only solution. and it CANT be the sd card because ive tried 3 different SDs and 2 different flash drives. All were fat32 formatted prior and still nothing. Saying the wii doesnt recognize the usb/sd doesnt make any sense to me considering all the apps for homebrew show up when the sd gets plugged in. So we know the storage device can be read. Its got to be a file issue. I know im one of many thatve followed your tutorials and are now stuck at this exact point. We desperately need a real fix for this. what a nightmare this has been.

[@luisbecerra5384]

You need nintendont for GameCube games

[@akilluminati47]

Lmao facts​@@luisbecerra5384

[@tunx222]

Did you ever fix this issue or no? It’s been a year since you made this so I’m kind of curious ngl

[@Playamane22]

@@tunx222 nope my Wii is bricked

[@tunx222]

@@Playamane22 Oh damn sorry abt that

[@amorchis0671]

I got a problem, my usb loaders stopped reading the games all of a sudden, so I followed every step on this guide to make it work again, installed everything as he said and had no issue, even formatted the usb to wbfs and used only wbfs games when transferring them, and I tried the same two games as he did and they worked nicely, but the problem is that when I came back to install other games with the same usb and through the same progam (backup manager), I went to put it back to the wii and every other game didnt appear except for those two that I tried at the start, then I tried by formating my usb again to wbfs, even tried with another usb, but every time the only two games that appear where wii sports, and wii sports resort, even if those weren't even installed in the usb, which is curious. I'm jus wondering if its a problem on my end or was it made on purpose?

[@jonashofstätter]

I have a problem. When i trie to open wii party in the UsB Loader GX, it either throws me back to the wii menu or teh homebrew app. Please help me

[@JordiumZ]

I tried upgrading my 64 to 128gb usb but it didn't work until I made the 128gb to WBFs, is there any way to get my gamecube games to show since wbfs is just wii?

[@michaelpaoletti8588]

THIS did it for me also. I've seen nothing about formatting in this method.

[@funkyscott47]

It's usually a backup method since it's best to have fat32, but it's good to know in case that doesn't work! :)

[@SillyGamingYT9796]

I did this as it wasnt recognized but now its recognized but doesn't see any of the games on my drive

[@SillyGamingYT9796]

I fixed it by enabling multiple partitions

[@woahkiddowhatsup2306]

How ?​@@SillyGamingYT9796

[@marceldebeer6387]

Hi man so far all your tutorials are really helpful and worked. I followed your steps as in the video however some games don't show up on the wii but on Wii backup manager you can see it did transfer, do you maybe have a solution?

[@funkyscott47]

Double check that they are the right format and the proper region for your wii

[@bryantdavis7617]

Why when I try to load the game goes to a black screen

[@Cringegod27]

Hey im having a problem where it shows some games i have, and then some are just blank but still show up. Then the rest of the games don't even show up . Any fixes?

[@mjernix7656]

If you're using a vwii on the WiiU: - make sure to use Wii manager to format your usb stick. - make sure the usb stick for your vwii is in the TOP port in the REAR. - do not put your WiiU hard drives/usb sticks in the rear, only use the front, this can confuse usb loader. -check the usb loader settings and click on the initialize button, it'll select the available drive. Enjoy

[@vikingpg3d]

Your saying putting at top port in the REAR and after your saying only use the front ones what?!

[@Vortex-Pocketowy]

@@vikingpg3d i think he meant that we should no put WII U hard drives like formated hard drive for wii u game that wii u wans you o format after powering it on wih his hard drive

[@CrazyLexi09]

THANK YOU oh my goood this finally fixed it for me!

[@antoklaric-jozic2967]

Thank you, video is very helpfull!!

[@luven666]

Before I tried loading games on my device, I managed to get he loader to mount my device. I had it formatted to FAT32. I think this was before installing the custom os. Now when I plug it in with a game loaded via wii backup manager it loads into sd mode. I have my apps etc installed on a SD card and my games on a wbfs formatted usb stick. But I still get the same error... I am not sure where I went wrong

[@troylollysaf9311]

Fixed!!😂 i went to hard drive settings, turn Multiple Partitions to ON.. and all my wii games show up. Im using fat32 usb stick tho👍

[@dennis_7271]

Do you know other ways how to possibly fix it?

[@PJforchipwithpotato]

Dude your the frickin goat

[@martynkilroy5125]

Hi great tutorials much appreciated. I've got a tdk usb only 4gb format fat32 works great. Did the came thing on 128gb SanDisk usb games show on loader. But when I press start the wii locks up. Is it just a case of incompatible usb. Thank you for your time.

[@funkyscott47]

yeah i think thats the same one i used and it did the same thing so it doesnt seem to work

[@Clyde__Frog]

Would this mean I would only be able to have wii games on the usb set up for wbfs?

[@fjl05]

I had the USB initialize problem. Turns out I just had my hard drive connected to the wrong USB port. I was on the bottom USB port on the back of the Wii U. I moved it to the top and it worked fine after that. Hopefully others find this simple issue too.

[@jasondillon2462]

I'm having an issue where installing a game from disc to my USB flash drive in USB loader gx doesn't work. My wii just freezes everytime i try it. I can install games to an SD card just fine but not the flash drive for some reason. It is detecting my flash drive but it won't install games to it. Are my USB loader gx settings wrong or something?

[@aaronchalden7209]

USB drive shows up on the Wii and it reads the available storage correctly, however my games show up nowhere on the usbloader. The files are in wbfs and in the correct directories. The Wii games box is checked, the thumb drive is compatible and in fat32 format. The file is named correctly and in correct GameID. I need help

[@bectorman6568]

For SOME reason, I followed another one of your tutorials, but games don't show up, even If I put them in the wbfs folder. Any help?

[@Leronus]

Didn't work for me sadly. Once I plug in the second USB (formatted as wbsf) it won't load the bootloader in Homebrew. I tried swapping the slots too but that doesn't work either. Using one USB led to the USB device not initialized error.

[@funkyscott47]

I'm not sure how to get it working with 2usb drives inserted at the same time. I take one out when I use my usb loader GX one

[@lachsoos7387]

Thank you, with 2 usb sticks it worked for me, but sticks are going to bend cause they are very near to each other. I tried to use an sd card, i installed the both apps onto it, but they dont get recognized. I can only format the sd card to NTFS or exFAT... I used exFAT right now, but as i said it didnt work. I cant launch the usb loader gx

[@funkyscott47]

what size of SD card is it? if it's above 32gb you need a software to format it. I have a video on that kzbin.info/www/bejne/rXS8nIlonqxgna8&ab_channel=FunkyScott47 :)

[@fabio-coel3828]

BRO THANKS I LOVE YOU!

[@funkyscott47]

[@TheHomeROYShoppingNetwork]

Hey, I have 2 consoles in which both have been modified. Why does my sd card work with no problem but when I put it in the other console it shows the back ups but when I try to play them it just returns to the apps menu? Is there a video on this

[@Darkmanzdogg]

Thank you! Great content! I'm having an issue when the games are transferring to the destination drive. At the 4:23 mark, when you mention that the transfer will take some time, it doesn't for me. Also, after the (very short) process completes, the results are in red, indicating an error in transferring. Any ideas? I've tried multiple source files and locations, after the initial drive format to wbfs, of course.

[@alexafhal]

same, did you find a solution?

[@Darkmanzdogg]

@@alexafhalnope

[@alexafhal]

@@Darkmanzdogg I fixed it. My issue was that I was trying to load GameCube games into the Wii backup manager when I was supposed to be using GameCube Backup Manager software instead

[@blackpanther13665]

still comes up with the same usb device not initialized error

[@lucreciatatsumoto]

My Wii doesn't even get that far, I hit USB loader and it just turns the screen black and shuts off my controller?

[@Papa_Productions]

I have a problem. I did everything you said and then I got to the drive part. I started the format with the correct setting and it did it but it would never recognize it after that. It does recognize other smaller ones but the one i used is a 1TB one and would like to be able to access it again but I don’t know how.

[@wakefulcvt23]

same here

[@TheRealArtDoctor]

Hey all I have are GameCube games and usb loader gx stays stuck in initializing devices. How do I fix that issue?

[@funkyscott47]

Try the other port first, but if that also doesn't work, that type of usb stick might now be compatible

[@sude2653]

I have one sd card and one usb. I use usb for games and use sd card for apps that we needed. I am confused where to put ''covers' folder to. The sd card or usb? Can you help me?

[@Balla_Bricks]

My Wii had the error where it put the Home Screen on usb loader gx so I tried this out and it didn’t work so I was wondering does the usb card you store the games on matter what brand it is?

[@loserftw9241]

Just wanted to ask, if you wanted to put in some gamecube games onto the drive how would that work? or would you have to use the original drive like an SD card for it to work out?

[@sixxtyxbilal9784]

I did everything in the video, as soon as I go to homebrew channel it doesn't show anything. when i start usb loader outside of homebrew channel, a screen appears and then i go directly to the wii home screen. What should I do I'm desperate :/

[@funkyscott47]

makes ure your device with your apps on it is fat32, and make sure it's plugged into port 0. when in the hbc, press 1 and manually select your sd/usb that way

[@sixxtyxbilal9784]

I did it, as soon as I'm on hbc, I press 1, on usb and nothing comes up, but the other tutorial from you where you explain everything step by step, all 3 apps were shown to me and I could use everything like in the video without any problems. I'll try the whole tutorial again later@@funkyscott47

[@sixxtyxbilal9784]

I have now done everything as in the 23 min tutorial and my usb loader starts, then I come to the wii theme but everything is white. I've waited 5 minutes and nothing happens... what's the problem?@@funkyscott47

[@Joshuaaaa62754]

@@sixxtyxbilal9784did you figure it out?

[@imarunnerimatrackstar4598]

i have a question, can u use the same usb flash drive where the usb loader gx is installed put games on it? just wondering

[@bridgettemilligan2257]

fantastic, thanks!! is there any way to use forwarders along w this method?

[@libyanhomie1186]

hey man, when I click the "wii games" on the checklist, it doesn't let me and it says "error: usb device not initialized. switching to channel list mode". I have played wii games on usb loader gx and this is a completely new problem I have never had before. Do you know a fix?

[@stigmaticbudgie666]

Hey I was running into this error as well and I finally fixed it. Go into settings, hard drive settings, then make sure Game/Install Partition is changed to WBFS. Hope this helps!

[@libyanhomie1186]

@@stigmaticbudgie666it just says “not initialized” and I can’t click it, y know a work around that?

[@stigmaticbudgie666]

Do you have the mount on boot option on? Also had the issue with the USB stick flashing and doing nothing so I switched to a external hdd.

[@libyanhomie1186]

Where do u find the mount on boot option

[@stigmaticbudgie666]

It's like the 3rd option I think in the same menu.