Furniture Padding - How to Pad Large Items

[@xeronomous6531]

Some additional tips: when you are wrapping a dresser or large furniture piece, line up the bottom of ur pad to where you heel touches the edge of the pad and your toe touches the furniture (this usually leaves enough pad underneath for the legs). Also for washers/dryers: place an empty tape roll around the control knob and shrink it before pad wrapping. This helps reduce the chance of the knob breaking, as it is usually made with cheap plastic. Also each band color is a different size. Red bands are too long for a typical dresser and should be used for larger pieces (ex. Church pews, King size headboards)

[@diegoaparecido657]

Congratulations for your work, I found it very practical and inexpensive for not using packaging. I work with change in Brazil and now I will use this technique.

[@misterjazzy]

Hi where can I buy the rubber bands from?

[@jasminemitchell2183]

Where did u guys get the large bands? And what size are the pads?

[@robertgreen8046]

72 x 80. You can find the moving rubber bands on Amazon.

[@xeronomous6531]

I could be wrong, but I believe pioneer packing sells these bands as well

[@dananderton963]

Victory Packaging should have it all👍

[@claudiahansen4938]

Great video. My furniture pieces are small, less than three feet wide and eighteen inches deep, three feet high. Would one standard moving blanket cover them? Would I need to use two green bands? How to protect legs on table? Thank you.

[@matthewdaniels2839]

Yes, one pad should definitely be enough for furniture of that size. Just experiment with different orientations of the pad when you begin the process and try angling the corners of the pad in different ways if you’re running into challenges. The key is to maintain tension as you’re folding the pad, as keeping it tight as you move from one part of the furniture to another is the best way to protect the piece. These guys were using bands, my workplace uses packing tape, there’s many ways to be creative with the process.

[@claudiahansen4938]

@@matthewdaniels2839 thank you so much!

[@nealthomas2096]

What about leaving enough pad to wrap the feet and/or legs otherwise great video

[@espinozaiownedu]

Could’ve done much better but I like the concept of bands.

[@espinozaiownedu]

Too much excess blanket. Could’ve been put in under on just about every item. And another one on top.

[@aureliomunguia8756]

Good video greetings from cdmx

[@TruckTaxiMoveIt]

Excellent

[@kyutaylor2205]

Your not covering the bottom of those items... this leads to scratching on the bottom of the furniture from dollies or moving around in the truck.

[@jacobbelury3417]

You usually put shrink wrap around it so the droors don’t fly out

[@jacobbelury3417]

And around the bottom base and top. So it helps moving it from upstairs to downstairs

[@espinozaiownedu]

@@jacobbelury3417 with tape you wouldn’t need shrink wrap :p

[@jacobbelury3417]

@@espinozaiownedu well if its big items i would rather use shrink for the simple fact that its easier to grip it and manuever

[@briankosla9046]

Guess what I’m a mover and no one cares about the bottom of furniture