Fusion 360 Drawing Basics -

[@codyr8974]

Lars you are the man! I'm sure I would have given up on learning Fusion without your videos. Thank you!

[@cadcamstuff]

That is awesome to hear Cody R .Thank you for watching the videos

[@mstoops69]

Lars, I love these videos. You are a real guy and not afraid to make mistakes... just like the rest of us! Thanks for being human! The tutorials are very valuable! *Lars for President!*

[@cadcamstuff]

That is awesome to hear mstoops69 .Thank you for watching the videos. I need that on a T-Shirt :-) Oh and about mistakes....all the time :-)

[@samiseghir3887]

Great lesson Lars! I wish you good health.

[@cadcamstuff]

Thank you Sami Seghir

[@davidgeller6109]

Thanks for these videos. I couldn't navigate and use F360 without them/you. There are enough fantastic features that make F360 attractive for a novice/recreational 3D designer/printer despite it remaining a complex, professional-grade product. Your easy-to-follow overviews help to bridge that gap and make using it possible.

[@cadcamstuff]

That is awesome to hear David Geller .Thank you for watching the videos Have an Awesome day!

[@fredbeyl3616]

Need a few more of these videos. I really enjoyed this, and found it most helpful, as always. Thank you for your valuable input. Fred.

[@btutor]

Thanks. I have learned most everything I know about F360 from you. Can you do a video on how to fix issues that arise in the timeline and why they occur?

[@LivingTech]

Thanks for yet another great video Lars! 😎👍

[@OzDesi]

Thank you. I wish they would add feature to change colour of dimension lines so It is clearer

[@abdouramanadamou3765]

Good morning sir, you are doing a great job but I am confused a bit, I am a beginner in 3d design so I don't know in which order I should follow your videos. Please can you guide me in that matter.

[@miyahollands6136]

Hi. Can you amend the info table, say if you didn't want a description, or add a finish? What about line weights, I always prefer to have a thinner leader and dimension lines then the object being detailed. Basic draughting 101; the cut / outer edges are normally thicker. Is there a way to do this?

[@bjornml.08]

Great video as always! TKS!

[@dalegraves2286]

Lars, another great video. Thank you!

[@joem5110]

As always, great stuff Lars!

[@stepstoknowsomething-balam9719]

HOW WILL YOU ADD DESCRIPTION IN THE BILL OF MATERIALS TABLE

[@gcuevasj]

Hello Lars i love watching your videos, Question: after adding all dimensions to a drawing is there a way to have Fusion check and make sure you didn't miss any dimensions?

[@AdrianTregoning]

Of course not. That's why you get paid to be an engineer or a draughtsman. You need to think what dimensions you need to machine, fabricate or assemble a particular components/components. You decide the tolerances, not a computer. You need to decide what dimensions are important, or even reference dimensions.

[@tarunpatel8889]

great work sir.... i am using fusion 360 education version 2020...when I go to drawing from design or new drawing .drawing module is not loaded...what is the reason...

[@lf559]

When I make an assembly drawing in exploded view, a part with multiple Instances appears each and every time in the BOM and the balloons eg: if I have 3 similar screws, it shows as part 1,2 &3. how do I get them to only show as the same part number but with 3 quantity?

[@charliedidio7421]

Me too great work

[@cadcamstuff]

Thank you Charlie Didio

[@digtos]

Looking for a good example of how to dimension Chamfers and Radius Which one of your video’s would this be in.

[@cadcamstuff]

Hi digtos Thank you for watching! I have not done that one, but I would do it either by a simple dimension or using text with a leader. Something like "45 Degree Chamfer on all edges"

[@aztecwarrior7373]

I can't get my 360 to do anything. I don't have the drop downs to make line . please advise.

[@ceesweerheim990]

Hi Lars Would it be possible to co-ordinate dimension from the origin, something like (X:Y) I am thinking with a manual milling machine and a digital readout in mind Thanks for great videos!

[@cadcamstuff]

Hi Cees Weerheim Thank you for watching! Yes, you have Ordinate dimensioning as an option in the dimension drop-down. That should do it! BEst, Lars

[@joekrieg5736]

Is there a way to include fractional dimensions in with decimal dimensions on the same drawing?

[@cadcamstuff]

Hi Joe Krieg Thank you for watching! Not what I am aware off, and that is an excellent request! I know the development team has a lot they would like to add to the software.

[@Lordmarkthe1st]

I believe that red area is a curtain. Like on a stage.

[@TYTAX_HOME_GYMS]

Lars great tutorial for drawing in F360 - thank you.

[@cadcamstuff]

That is awesome to hear mariusz szultka .Thank you for watching the videos

[@kb7722]

Thanks for sharing!

[@eduardomartins6796]

Really nice. What about if I have different parts on my design model and I want to do separate drawings of each part on the the same sheet. Is it possible? Tahnk you.

[@ollie1505]

Eduardo Martins create a new base view and toggle the unwanted components off

[@marcoantoniomartinezvidal7972]

Hi, quick question, is it posible to change an horizontal drawing to vertical, thanks

[@cadcamstuff]

Hi Marco Antonio Martinez Vidal Thank you for watching! There is a rotate button up in the menu, next to the rotate button. Hope this is helpful

[@Cadcare]

"If you are from [the rest of the entire world] or American" (6:47)

[@scientist100]

ASME, best.

[@mauri4763]

Hi, do you have a video of chamfering hex nut or hex/square bar. thanks

[@cadcamstuff]

Hi MAURI HAKALA Thank you for watching! This video might be helpful kzbin.info/www/bejne/eqHcgoCrbt2lm80 Best, Lars

[@Gallardo6669]

45k views and less then a 1k like.... Common people... This guy is great....

[@woshou95]

Thanks for the video Lars ;)

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@borismeldre]

how to get weight information on the drawing?

[@cadcamstuff]

Hi Boris Thank you for watching! You will have to manually enter those for now. I saw on the knowledge network site that it is on the roadmap for the future

[@borismeldre]

Thank you Lars for all the videos/webinars. I remember some versions ago Fusion360 supported weight variable to be inserted into the drawings. i wonder why it has been taken out? and will hope they will include it back sometime soon in the future.

[@CoderTronics]

Very useful, thanks

[@cadcamstuff]

Hi Coder Tronics Thank you for watching!

[@lastcall2night]

Thank you!

[@cadcamstuff]

You are so very welcome

[@joecarpenter5602]

Sorry, I was late. Good Job Lars.

[@cadcamstuff]

Joe, never be sorry for being late on a live stream :-) Really appreciate you taking the time to watch. Have an awesome day!

[@nssdesigns]

I'd like to see a live stream where you take ALL your sketches and export them as one single .dxf file for water jet cutting. Seems you have a BASE sketch then sketches from faces of your 3D model... I need to know how to get them into one single sketch file for export to a cutter...

[@cadcamstuff]

Hi Paul Hitchman Thank you for watching! Did you ever see this one? You could just do the waterjet portion within Fusion kzbin.info/www/bejne/Z6maiKp-fMesaa8

[@nssdesigns]

Lars Christensen I'll take a look. Thanks for answering.

[@mitchos199]

That update was over a year ago

[@chetanbijjal81]

New trends in helical milling ctter

[@DLVLeonovs]

bla bla bla...