Fusion 360 - How to work around sketch ARCs that will not close!

  Рет қаралды 102

Toffypops

Toffypops

Күн бұрын

Sometimes you have designs in sketches where you seem to should have got a closed loop, but it is not giving you indication of closed.
Problem is that you are not connecting the correct sketch points!
This is how you fix it!

Пікірлер
Fusion 360 Mistakes I Make Sketching (10 Things To Avoid)
9:03
Fusion 360 Mistakes I Make Sketching (10 Things To Avoid)
Tyler Beck of Tech & Espresso
Рет қаралды 190 М.
Fusion 360 - Sketch in Groups - Why i recommend doing this, and HOWTO do this.
16:36
Fusion 360 - Sketch in Groups - Why i recommend doing this, and HOWTO do this.
Toffypops
Рет қаралды 90
SHAPALAQ / 8 серия / 4 часть #aminkavitaminka #aminokka #расулшоу #аминкавитаминка
01:01
SHAPALAQ / 8 серия / 4 часть #aminkavitaminka #aminokka #расулшоу #аминкавитаминка
Аминка Витаминка
Рет қаралды 3,7 МЛН
Life hack 😂 Watermelon magic box! #shorts by Leisi Crazy
00:17
Life hack 😂 Watermelon magic box! #shorts by Leisi Crazy
Leisi Crazy
Рет қаралды 79 МЛН
ДЕНЬ УЧИТЕЛЯ В ШКОЛЕ
01:00
ДЕНЬ УЧИТЕЛЯ В ШКОЛЕ
SIDELNIKOVVV
Рет қаралды 4 МЛН
小路飞嫁祸姐姐搞破坏 #路飞#海贼王
00:45
小路飞嫁祸姐姐搞破坏 #路飞#海贼王
路飞与唐舞桐
Рет қаралды 29 МЛН
Sketch Constraints Made Easy in Autodesk Fusion [UPDATED!]
10:01
Sketch Constraints Made Easy in Autodesk Fusion [UPDATED!]
Autodesk Fusion
Рет қаралды 55 М.
Fusion 360 - Redefine sketches to offset planes when you have errors after changes not to surfaces
5:27
Fusion 360 - Redefine sketches to offset planes when you have errors after changes not to surfaces
Toffypops
Рет қаралды 49
Хорошая замена SketchUp? | Базовые инструменты в Rhinoceros 3D
15:33
Хорошая замена SketchUp? | Базовые инструменты в Rhinoceros 3D
AVE | Arch.Vision.Education.
Рет қаралды 10 М.
I didn't know LightBurn could do THAT!
16:12
I didn't know LightBurn could do THAT!
The Tinkerverse
Рет қаралды 83 М.
Fusion 360: Automatically connect lines with ConnectTheDots
3:00
Fusion 360: Automatically connect lines with ConnectTheDots
TheTipsAndTricks
Рет қаралды 44 М.
Fusion 360 - 23 Tips Beginners Must Learn
15:45
Fusion 360 - 23 Tips Beginners Must Learn
Tyler Beck of Tech & Espresso
Рет қаралды 213 М.
3 Hours vs. 3 Years of Blender
17:44
3 Hours vs. 3 Years of Blender
Isto Inc.
Рет қаралды 5 МЛН
10 tips for Fusion 360 that I wish someone told me sooner.
12:32
10 tips for Fusion 360 that I wish someone told me sooner.
Austin Shaner
Рет қаралды 373 М.
Getting Started with Fusion 360 Part 1 - BEGINNERS START HERE!
21:32
Getting Started with Fusion 360 Part 1 - BEGINNERS START HERE!
The Fusion Essentials
Рет қаралды 234 М.
Getting Started with Fusion 360 Part 2 - Creating PLANS from your Models
13:58
Getting Started with Fusion 360 Part 2 - Creating PLANS from your Models
The Fusion Essentials
Рет қаралды 46 М.
SHAPALAQ / 8 серия / 4 часть #aminkavitaminka #aminokka #расулшоу #аминкавитаминка
01:01
SHAPALAQ / 8 серия / 4 часть #aminkavitaminka #aminokka #расулшоу #аминкавитаминка
Аминка Витаминка
Рет қаралды 3,7 МЛН