Fusion 360 - Wave-Ribs on a Vase or Office Organizer.

[@Andatest]

Hi, how i could make the body at 14:36 shell, tried with the tool but is showing and error THANKS

[@wiperpaul]

I wanted to make a design with a few hundred panels in the end during my pattern on path, I used two panels with one which was a bit shorter to give some additional design and duplicated this. When I try the thicken operation on my selection set of 300 it uses all my 32GB of RAM and freezes. I left it for 30 mins but no luck, is there a way around this ?

[@nickp385]

Do you have beginner videos, to start learning how to use the program?

[@KristianLaholm]

While I don't have a complete beginner's series available, there is a basic playlist on my channel that you can follow once you have a grasp of the fundamentals of Fusion. This playlist will guide you through some essential techniques and concepts to help you progress beyond the basics.

[@hansihintersoos7581]

Great approach! I was trying for hours but couldnt get it right. Then I saw your video and it made click in my head :D

[@joell439]

Fascinating - thank you Kristian. Definitely earns a subscription. Looking forward to watching more of your content. 👍👍😎👍👍

[@MAXimator70]

Just discovered you by this awesome Video! Instantly Subscribed! Thank you for your effort!

[@KristianLaholm]

Thank you for your support :)

[@chrisdempsey3170]

Genuinely some of the best fusion tutorials on KZbin. I've learned so much about navigating the program from these videos. Just being able to select only bodies and making selection groups and grouping large numbers of timeline events. Truly thank you for your great explanations and tips. Explaining the shortcut commands you use help so much.

[@adambergendorff2702]

Great video, I had know idea how you where going to approach this design, You really made me think about the loft , twist, and pattern functions, I would not have done it this way because of my ignorance.

[@hazardfamilly]

J'adore

[@Kolgezen]

very good video, thank you.

[@KristianLaholm]

Thank you

[@mokiedee]

Kristian!! Your tutorials are fantastic! I learned so much with this one. I’ve been creating some lampshades and the ribbed style is the one I was looking to learn. Thank you! ❤

[@KristianLaholm]

Thanks for the amazing feedback! It makes me really happy to know you're putting the tutorial into practice and creating something new.

[@jeremiahpratt5685]

Love this video!! Do you have any general pointers for mimicking an emboss on a surface that’s curved in more than one direction?

[@KristianLaholm]

I use an intermediate body and emboss on that. Then add that to curved body or use split face + offset face, will not work on all surfaces and there will be distorsions of the sketch you want to emboss.

[@rpatrick2]

Very cool. I was thinking of making a coaster like this for CNC milling. Though it could make a cool mug also.

[@KristianLaholm]

If you make some thing please share a picture :)

[@chinchan9]

Thanks for sharing bro!

[@varazir]

Didn't know you could constrain one lines center to another line. :) I usually use dimension, the half of the vertical line to the horizontal line.

[@KristianLaholm]

There are some useful ways of using constraints but it's a bit hard to find help/tutorials on all the small tricks.

[@vishalchandila]

Watching fusion calculate may be one of most stressful thing 😂

[@KristianLaholm]

I no longer feel the need to see scary films ;)

[@MrDonTabasco]

Tack för intressanta och lärorika instruktionsfilmer, jag gjorde min egen version av denna och printade den, den blev jättehäftig!

[@KristianLaholm]

Tackar :)

[@Micahberger1]

Great video, I learn a bunch. I will repeat this and attempt a speed run at it.

[@KristianLaholm]

Thank you, and good luck with the speed run ;)

[@SebastianLarsen]

Really nice solution! Thanks for sharing this workflow.

[@KristianLaholm]

Thank you

[@medtuning]

very very good!!!

[@happywanderer5632]

Fkn Genius! I could not do half my work without your videos!!!

[@KristianLaholm]

Thank you

[@BornToulouse]

Great video, you do an amzing job on your tutorials, thank you!

[@KristianLaholm]

Thank you